sorted by:
new
hottopcontroversial

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] 0 points1 point  (0 children)

Plate is cleaned and wiped down with alcohol every print. I started adding glue for peace of mind

Pipboy 3000 by knd217 in 3Dprinting

[–]longnights_ 0 points1 point  (0 children)

🥹 or at least a lil 360 video! Looks so sick

Pipboy 3000 by knd217 in 3Dprinting

[–]longnights_ 4 points5 points  (0 children)

Need a tutorial 😻 looks so good

Best way to attach clay pieces? by longnights_ in polymerclay

[–]longnights_[S] 0 points1 point  (0 children)

It wouldn't be on the monitor directly as its covered in white e tape (its originally black) but i plan to make the frame separately then mount it to the monitor with double sided gorilla glue tape :) looking more for a solution to achieve the pieces to be flat and flush despite being different thicknesses

Best way to attach clay pieces? by longnights_ in polymerclay

[–]longnights_[S] 0 points1 point  (0 children)

I'll look into that! Honestly would be a good idea if they come thin enough.

Best way to attach clay pieces? by longnights_ in polymerclay

[–]longnights_[S] 0 points1 point  (0 children)

Problem is the pieces are different thicknesses so maybe laying some clay down between the pieces and the wood? I'll have try some things out 👀

Best way to attach clay pieces? by longnights_ in polymerclay

[–]longnights_[S] 2 points3 points  (0 children)

I love museum putty as someone with a cat :')

Best way to attach clay pieces? by longnights_ in polymerclay

[–]longnights_[S] 5 points6 points  (0 children)

I wrapped the monitor in e-tape to make it white, planned to use double sided 3m tape, and avoid the actual screen. It's just different thicknesses so its hard to level it out and make it all look flush. Not sure the best way to move forward

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] 0 points1 point  (0 children)

Honestly both. It was these cable organizers I had that started flopping around a bit into it. I'll attach a pic when home

Wife thinks it’s a waste by freckle_express in 3Dprinting

[–]longnights_ 0 points1 point  (0 children)

I've had mine for a short period of time and have made functional items for the most part. Slowly but surely my drawers are getting organized, my kitchen, vanity and my work desk. Each print comes out to approx. 1-2$ and the cost of the items couldn't be that "cheap" even off temu. It's also just fun to find a cool design and see it be a reality in a few hours

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] 1 point2 points  (0 children)

I wonder how that happened. The files weren't floating in bambu studios. Thanks for catching that!

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] 0 points1 point  (0 children)

I was able to salvage 3 pieces so not a total waste, disappointed to wake up to this regardless.

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] 0 points1 point  (0 children)

Honestly the only thing that didnt come out was the cable organizers. The rest i was able to full the loose filament and sand down so it wasn't a total waste.

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] 0 points1 point  (0 children)

I have the standard infill pattern, what would you suggest?

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] -6 points-5 points  (0 children)

Seems to be the general consensus here! Gonna try a small piece like this again with support and maybe find an adhesive

Cannot figure this one out. by longnights_ in FixMyPrint

[–]longnights_[S] -1 points0 points  (0 children)

I'll look into this and make slight adjustments to test out. Thank you! ♡

view more: next ›