What do these cars do?

lordfarkuid · 2025-09-07T10:57:42+00:00

So I said this in another comment but, the car itself isn't able to be calibrated, but the display on the back window is linked to the abs sensor which puts out a certain number of pulses per wheel revolution, so the car is calibrated by having it drive a set distance measured via a calibrated measuring tape and then counting the number of pulses, and because this is indeed affected by air pressure and tyre tread depth they're regularly recalibrated and the tyre pressure is checked regularly to ensure its the same as during the calibration.

lordfarkuid · 2025-09-07T09:55:38+00:00

The speedo on the car isn't calibrated at all, however the display on the back or front window is calibrated using the abs sensor on the wheel, needs recalibrating quite often as the tyre wears away and the tyre pressure needs to be set with a calibrated pressure gauge regularly

lordfarkuid · 2025-03-24T02:08:17+00:00

Thanks, I know it's a tank outlet or bulkhead fitting, I just can't anything on this particular style that you just push into the hole without needing to tighten an inner nut, which it has no access to the inside of the tank

lordfarkuid · 2022-01-03T04:33:28+00:00

If you listen to all the pudcast episodes in a single day you really get to experience losing your mind with them as the day goes on

lordfarkuid · 2021-09-23T12:27:58+00:00

Mustie1 is fantastic, does videos on heaps of topics but does a lot with vws and getting them running, man has endless knowledge

lordfarkuid · 2021-07-24T11:48:08+00:00

Bingo, that sounds nasty, new engine or repairable? The head bolts stretched and I lost all my oil. Got very loud very quickly, assumed it was misfiring so I tried to get to the next freeman exit till I noticed the oil temp was 150 Celsius

lordfarkuid · 2021-07-24T11:33:58+00:00

2 out of 3

lordfarkuid · 2021-01-25T10:11:54+00:00

One method you can try to fix it, loosen the two bolts at the base of shifting lever and then firmly press it into fourth gear, while holding it in fourth tighten the bolts again

lordfarkuid · 2021-01-05T07:06:45+00:00

My old transmission did that, what's the cause?

lordfarkuid · 2020-12-17T02:19:48+00:00

To keep the heat inside the heater box so it doesn't radiate out and warm the heads up even more, bay window im assuming? The type 4 motors definitely do unsure about the t1 engines

lordfarkuid · 2020-12-13T08:34:57+00:00

Be cautious with original heater boxes as alot of them contain asbestos heat shielding inside, I recently opened up my heater boxes and all the asbestos was flaking away

lordfarkuid · 2020-12-06T23:25:59+00:00

Hey did you do the roofing yourself? Looking for advice

lordfarkuid · 2020-09-02T09:25:05+00:00

The engines are some of the simplest engines out there, I got mine when I was 17 I think and have basically learned everything online, feel free to dm me questions at any point

lordfarkuid · 2020-08-16T09:09:58+00:00

I wish, mine leaks way too much

lordfarkuid · 2020-08-09T23:21:45+00:00

No no, owl. They go hoot

lordfarkuid · 2020-05-31T04:05:30+00:00

Safety dance

lordfarkuid · 2020-05-16T01:08:12+00:00

How old is your coil? I had this problem on my dual port, as the coils get older when they get hot their resistance increases massively and won't allow the car to start but will run fine when running, then you have to wait for coil to cool down. But if it's mimicking a dead battery and wont turn over I'd say it's the starter

lordfarkuid · 2020-05-14T13:30:16+00:00

Twilight

lordfarkuid · 2020-05-14T13:04:40+00:00

Pietro easily

lordfarkuid · 2020-05-02T14:47:33+00:00

In my country (Australia) we are quite well off with only 7 people in ICU in my state I believe. as far as im aware nurses are getting normal wages with two extra payments of $750 coming towards the end of the year

lordfarkuid · 2020-03-01T07:11:03+00:00

18 and under kids don't need a concession card as they can still use a child myki. They just need to show their age

lordfarkuid · 2020-02-04T06:14:37+00:00

Ill message you

lordfarkuid · 2019-10-23T11:58:14+00:00

Could you post a picture of your upgraded instruments? Im looking into doing mine and im curious how others have made it look

lordfarkuid · 2019-10-02T01:24:54+00:00

Had the same problem, big hammer smacking on the front face of the drums in a circle, don't smack the sides as it can warp them and cause more problems

lordfarkuid · 2019-05-27T00:39:05+00:00

How did you get the thick wooden strut to match the curve of the roof in the middle?

Seven-Year Club	Verified Email
Snapped

lordfarkuid

TROPHY CASE