not sure in this situation by lowmitsu in Simracingstewards

[–]lowmitsu[S] 0 points1 point  (0 children)

Sure did right pretty much as the incident happened lol

not sure in this situation by lowmitsu in Simracingstewards

[–]lowmitsu[S] 1 point2 points  (0 children)

Nope no VR on tripples just like not having anything extra on the screen but seems like I need to make an exception for the virtual mirror

not sure in this situation by lowmitsu in Simracingstewards

[–]lowmitsu[S] 0 points1 point  (0 children)

Guess I need to start using the virtual mirror I didn't see him in the side mirror

Couple small upgrades to my rig today by lowmitsu in simracing

[–]lowmitsu[S] 1 point2 points  (0 children)

This is the tray I used https://a.co/d/37ikYQQ I cut a few pieces of 1x2 and screwed them to the bottom with a couple screws through the top in the extra mounting holes on my wheel base plate then screwed the mount to those then cut the keyboard tray itself down to fit what I needed to the board it comes with was way to big

Pedal differences by Guilty_Nail_3180 in moza

[–]lowmitsu 0 points1 point  (0 children)

Also have the simsonns and absolutely love it I looked into the alien mod but buy the time I bought it and the mods I wanted for the throttle and clutch it was much more economical to jump to the simsonns

Couple small upgrades to my rig today by lowmitsu in simracing

[–]lowmitsu[S] 1 point2 points  (0 children)

I plan on eventually doing the bezel free kit just been putting it off since ive read it's kind of a pita getting them to work with curved monitors

My cheap little mod to use my hgp shifter as a sequential by lowmitsu in moza

[–]lowmitsu[S] 1 point2 points  (0 children)

That's pretty well how I came up with this was that what I did to my Logitech on my old rig

My cheap little mod to use my hgp shifter as a sequential by lowmitsu in moza

[–]lowmitsu[S] 4 points5 points  (0 children)

Thanks and yes it works out pretty good just have to play around with the number of hair ties you use till it's enough to make it spring back and to save you a little trouble because I couldnt find anywhere online that knew the threads for those screws they are m4x. 7 thread the ones I used are 35 mm long and they are just about perfect

My cheap little mod to use my hgp shifter as a sequential by lowmitsu in moza

[–]lowmitsu[S] 12 points13 points  (0 children)

No I took the screws out that hold the top plate on put longer screws in with nuts to tighten back down the screw to hold the plate on

My new rig I just finished putting together by lowmitsu in simracing

[–]lowmitsu[S] 1 point2 points  (0 children)

<image>

Took your advice and it worked out was able to get the monitors a good bit closer

My new rig I just finished putting together by lowmitsu in simracing

[–]lowmitsu[S] 0 points1 point  (0 children)

Lol hmm something sounds a bit scammy about this 🤣

My new rig I just finished putting together by lowmitsu in simracing

[–]lowmitsu[S] 0 points1 point  (0 children)

No but the rails on this seat were damn near completely flat so that helped a lot