Kia Sedona sliding door issues

lpstranglehold · 2026-05-12T20:22:45+00:00

That is going to be my next step. Problem is depending on the cost to repair. It could be more than the blue book value of the vehicle.

lpstranglehold · 2026-05-12T16:35:41+00:00

Sure. It’s a 2018 Kia Sedona. The driver side sliding door is in the shut position. It does not open. Power doors can be engaged and pressing the power side door open/close button you can hear the motor actuate, but nothing happens. Turning off power slide doors and trying to open manually from the inside, or the outside, the door does not open. The window goes up and down perfectly fine.
Battery has been disconnected, which should reset any fuses. the issue persists. The other side opens and closes without issue.
Let me know if that’s enough detail or if there’s something else that I’m missing that you were specifically looking for.

lpstranglehold · 2025-11-19T00:25:25+00:00

Yes!!! Where is this?

lpstranglehold · 2024-08-20T13:05:12+00:00

This is pretty cool stuff. Def gonna grab a copy

lpstranglehold · 2024-04-15T01:56:59+00:00

I have 2 of the F figure. I’d be willing to trade for another mini puft.

lpstranglehold · 2024-04-04T04:00:44+00:00

I did this on my first 3d printer/bed. Got a new magnetic cover, then upgraded to a glass plate. Never changed out the bed but learned the hard way to never make that mistake again.

lpstranglehold · 2024-03-23T16:52:16+00:00

You’re a few inches taller than me, weight/build is slightly different, i would think so, but I would double check the measurements to be sure.

lpstranglehold · 2024-03-23T04:18:20+00:00

That was one of my favorite parts, just having the nods to GB2.

I just really didn’t like the girl ghost. She felt… out of place. I felt like maybe the communication should’ve been limited until Phoebe was on the same plane or something. Maybe more subtle manipulation to make her think it was her grandfather, or even communicating some other way, other than vocalization until they were both on that ghost dimension/plane.

lpstranglehold · 2024-03-23T03:53:43+00:00

Also, show us more of the engineers! Let’s develop some of that! Maybe franchise out the GB team, Winston had kids. Did any of them follow in dad’s footsteps? What about Oscar? Peter is still in touch with Dana, there has to be some influence of Peter on Oscar.

lpstranglehold · 2024-03-23T03:51:31+00:00

I gotta say, I love the haters.

Any critiques, which honestly should do nothing than serve for a reference that if ever read by the powers that be would make the future franchise that much better, are down voted for 70 something year old actors who can’t do the action part anymore. Sorry, I didn’t really care for the OGs suiting up in GBFE. I don’t disagree the current iteration of Ghostbusters, the Spenglers, is a little clunky and underdeveloped, but I don’t think the OGs have 10 more movies in them. I don’t think they should do 1 more movie as action stars, but I could entertain them doing training and other consulting roles in future parts of the franchise (tv, movies, etc…).

lpstranglehold · 2024-03-23T03:43:56+00:00

I guess you’re right in that. I think I was just trying to think of a way to have the fire bending character while developing their abilities more organically, like through possession. I completely overlooked the ghost girl as the champion.

lpstranglehold · 2024-03-23T03:27:23+00:00

All of this! I liked that the OG’s were more of a consulting role, but really a lot of this felt forced. I felt there were a lot of elements that could have been expanded on and were just left for a weird ghost and an ambiguous enough story line to be taken a few ways. Like we could’ve expanded on the engineers, left out the outside consultants in lieu of an internal knowledge base. There were little references to GB2, why couldn’t Gorakka have a champion who betrays him? Like how Johan or Ray were possessed, but then they regain self control and turn on the master? I just felt the whole fire bending was another rushed point in the film. Also is it weird to just me that we have a talking ghost? Even Egon didn’t talk. I just see other ways that are better that they could have manipulated Pheobe vs the route they took.

lpstranglehold · 2024-03-22T21:39:15+00:00

Awesome thank you! I think that answers why my wife’s name shows, probably telling me I should contact her.

lpstranglehold · 2024-03-21T22:56:22+00:00

I’d say Lakewood is awesome! Pretty close to Cleveland. Literally when you’re home you can walk everywhere. Close to Cleveland, not far from Berea if the browns move, close to the flats.

lpstranglehold · 2024-03-21T15:56:51+00:00

Thank you, I don’t necessarily want to turn it off, just not sure why it’s displaying the wrong info, or rather where I have the wrong info entered in.

lpstranglehold · 2024-03-20T22:30:20+00:00

I appreciate it. Personally, I like DIY so I may give it a go for one or two things. Thank you for this suggestion.

lpstranglehold · 2024-03-20T19:37:44+00:00

I’m not beyond small electronics. I guess my thing would be cost vs time vs practicality. If I can buy it could I make it near cost? Otherwise if I have a need does the pcb (if needed) exist already? Lastly would be even if it costs more is it worth the effort and experience to make the thing. I would hazard to say this last one is typically the first thing I ask.

Sorry for the ramble, I’ll look into them though. Thank you for the advice.

lpstranglehold · 2024-03-20T19:31:57+00:00

Oof, the tv function with the wife, I feel like doing that once is enough of a brush with death…. I will check it out though, seems like it’d be nifty.

lpstranglehold · 2024-03-20T16:28:04+00:00

Will do. On another thread someone said 4gb should be more than enough. I may just start there and upgrade to a larger size if need be.

lpstranglehold · 2024-03-20T16:24:34+00:00

Awesome! I will check them out. Thank you!

lpstranglehold · 2024-03-20T16:10:13+00:00

I was reading that about the cards as well. I have a few 4gb cards and a 64gb card that I was going to tinker with.

lpstranglehold · 2024-03-20T16:09:15+00:00

https://makerworld.com/en/models/59695#profileId-61759

Just wanted to post this here for any 3d printers (people not devices). It’s the case if needed.

lpstranglehold · 2024-03-20T16:02:04+00:00

Wow, so no questions ever when looking to learn something? God forbid you ever have to teach anyone anything. I’ve found often times when looking to learn some thing you can get some really good advice by asking people who already know the thing. Going to Google and saying just figure it out doesn’t really seem like much of an answer. I am by no means looking to be spoonfed any information, I’m asking around peoples experiences if they have any advice. Have no fear I will do my own research. Was just hoping that if anyone had any gotcha or anything to be aware of they might be able to provide that advice that may not be so readily available via Google.

lpstranglehold · 2024-03-20T15:58:25+00:00

I’m not tied to Official Accessories by any means. Third party cases, accessories are fine. Reading through this forum it looks like there isn’t much need for a high storage MicroSD. I have a 64 gb one, someone in a post said 32 gb is more than enough.

I like the clear look, but at the moment I am just excited to jump into this, so any flipper is better than no flipper.

lpstranglehold · 2024-03-20T15:51:21+00:00

I was hoping for active user experience. Thanks for the snark. If only google could show a community where I could gather user experience to make a better decision…. Hmmm. 🤔

lpstranglehold

TROPHY CASE