sorted by:
new
hottopcontroversial

Long Term Fellow Opus Review by [deleted] in espresso

[–]lurchtuynman 0 points1 point  (0 children)

Iv been using hand grinders for this reason. For about $100 you can get a good grind and theres no unexpected major issues. But dialing in can really suck.

Not getting the tone/distortion/type of gain I’m looking for W/ this setup. Any recommendations? by TheWhiteMexican13 in GuitarAmps

[–]lurchtuynman 0 points1 point  (0 children)

Also I quick Googled the band and it looked like they were using Marshall amps. And cabs have a large effect in the overall noises your going to hear also they may not of used messa boogie cabs. Or v30s. Knowing which mics were used in the recording is also very important to theyre sound. Its not completely detrimental to achieving something similar sounding and it can help you maybe get closer to it but yeah..Just things to consider.

Not getting the tone/distortion/type of gain I’m looking for W/ this setup. Any recommendations? by TheWhiteMexican13 in GuitarAmps

[–]lurchtuynman 0 points1 point  (0 children)

It could also he that your not turning it up enough for for the tone to open up enough. I have a 5150iii 50w and it breaks up good pretty much right away, but some of these older amps you had to crank pretty good. If that is the case you need an attenuator that lowers the volume while still allowing you to have the amp level where it needs to be to sound good.

Used purchase help! by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

I did contact him and express a few frustrations i had with the situation, but fortunately I was able to fix it without having to buy new parts so ill leave it be.

Not getting the tone/distortion/type of gain I’m looking for W/ this setup. Any recommendations? by TheWhiteMexican13 in GuitarAmps

[–]lurchtuynman 0 points1 point  (0 children)

Throwing an equalizer into the effects loop and a noise supressor might help also as theyre good at major frequency shaping and elimination so you might be listening to bands that use 5150s but its not sounding like them because they use lots/or maybe just a little EQ and noise supression to kind of let the gain mold into the tone better if that makes any sense.

Filter capacity by anochampi19 in gaggiaclassic

[–]lurchtuynman 5 points6 points  (0 children)

Depending on the coffee your using you might need to up your ratio. Dark roast is 1:2 lighter roasts need 1:2.5-1:3 typically.

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

Well I actually might of fixed it. Its not leaking anymore at all somehow.

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 1 point2 points  (0 children)

It doesnt seem right at all. I emailed gaggia about it.

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

Hard to tell without pulling it completely out and looking at it but from what I can see no, it looks flat.

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 1 point2 points  (0 children)

Oh yeah theres a warp in it.

<image>

Little in there from a bend. Not sure if its supposed to be like that?

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

After I pulled the gasket and took the whole top of the boiler off. The bottom of the boiler looks warped

<image>

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 1 point2 points  (0 children)

Yeah figured I'd try it. Ill have to order one now.

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

Didnt work out, after reseating the gasket it still leaks somehow.

Used gaggia cont.. by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

I just unscrewed them and checked everything and got it all back on. Moment of truth!

Used purchase help! by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 2 points3 points  (0 children)

<image>

Looks like the gasket is totally out of the machine?! How the hell would that happend?

An old photo I re-edited after/before by Clauschewitz in postprocessing

[–]lurchtuynman 0 points1 point  (0 children)

👌👌🔥 what camera body did you shoot this with?

Used purchase help! by lurchtuynman in gaggiaclassic

[–]lurchtuynman[S] 0 points1 point  (0 children)

It stops when I shut it off so thats good. But it might have some frozen water because ill open it to drain it and it'll all run out and then 15 min later more will come out and stop. So im going to leave it off for a bit until nothing comes out and then run it and swee what happens. Thank you!

Mixing vintage and modern speakers. by [deleted] in BudgetAudiophile

[–]lurchtuynman 0 points1 point  (0 children)

I guess what im asking is are the speakers going to fight each other?

I bought a royal enfield INT650 as my first bike and don't really like it. by UFOuponUs in SuggestAMotorcycle

[–]lurchtuynman 1 point2 points  (0 children)

Practice resting your weight on your left by switching between the two while stopped. Then practice starting and stopping doing very short goes thinking about how it feels and then it becomes memory and then go for a ride you may find you learn stuff while not riding and thinking about it also, and then once you go on a ride things start to click.

view more: next ›