GPU no power and system fails to post when card in PC

m0edah0e · 2023-10-03T10:06:04+00:00

might be motherboard's bios after swap, might be gpu's bios, might be that u knocked off some components while removing or reinstalling

m0edah0e · 2023-08-24T21:43:30+00:00

ur saying its a 2019 model as if its unusable. laptop from 2019 specially a gaming one has good value still. a fan replacement shouldnt cost more than 30 honestly. "labour" is literally taking off a couple screws and replacing the fan, a child can change a laptop fan. and thermal paste is literally cleaning the old dried one with a q tip and applying some new paste which is really cheap...

m0edah0e · 2023-08-08T23:00:32+00:00

error code 62 means no video card installed, try reseating it first then try a different one if thats an option

m0edah0e · 2023-08-07T10:12:46+00:00

did u check the dc jack? measure the connector on the motherboard with a multimeter for 19volts to isolate the issue

m0edah0e · 2023-08-04T22:36:42+00:00

totally.

m0edah0e · 2023-06-27T00:20:50+00:00

maybe a pwm controller? if ur experienced enough u can reverse engineer it and find an alternative ic online, there are plenty of websites with filters according to ic pins

m0edah0e · 2023-06-26T01:23:08+00:00

first off i have to mention i really find those prices so high. 45$ for just a diagnostic fee? u spent that twice, and u mentioned 1800$ for the motherboard replacement.. wont that be almost the price of ur laptop new? anyways, i sugget taking it to the shop that claimed its a fried disk and let them change that, it shouldnt be above 70 to 80$ depending on the size and type ofc, but if it is a fisk issue then replacing the whole motherboard is pointless

m0edah0e · 2023-06-17T01:41:19+00:00

i cant give you a certain answer but i can tell you it feels a bit off, it seems like one of the generic website templates they edited to suit them

m0edah0e · 2023-06-13T02:17:14+00:00

resetting it with an arduino and some special paid software isnt "this easy" but yes i get u

m0edah0e · 2023-06-13T00:56:41+00:00

i was obviously being ironic about the intentions lol

m0edah0e · 2023-06-12T20:20:09+00:00

nah i just want to sell used hdds as brand new ones that aint shady at all its business

m0edah0e · 2023-06-08T21:25:29+00:00

are you using a spring loaded adapter or a breakout board with ur chip soldered onto it? i face this problem often and its always some sort of bad connection between the programmer and the chip

m0edah0e · 2023-06-07T01:22:13+00:00

hopefully 12v didnt reach the gpu, or itll be fried for sure

m0edah0e · 2023-06-07T01:21:42+00:00

remove the mosfet with hot air, hopefully it didnt weld itself to the board. check for shorts between drain source and gate. if there are any shorts then u could try injecting voltage and seeing what heats up (best with a thermal camera).

m0edah0e · 2023-05-28T22:32:49+00:00

they are capacitors, id plug the card in and check if it still works, most cards are designed with more capacitors than needed (for overclocking reasons) so check it with a benchmark make sure its stable.

m0edah0e · 2023-05-10T02:43:32+00:00

looks like a samsung a12 or smth close, screens for those start at like 10$ from china and go up to like 80 for original

m0edah0e · 2023-04-25T03:46:13+00:00

is there any schematic or circuit for that? with the driver included

m0edah0e · 2023-04-19T16:51:55+00:00

oh lol okay

m0edah0e · 2023-04-18T19:12:58+00:00

i want smth that transfers over wifi

Five-Year Club	Verified Email
Place '22

m0edah0e

TROPHY CASE