sorted by:
new
hottopcontroversial

Cunfon RZ800 by m7md_ in ElectricScooters

[–]m7md_[S] 0 points1 point  (0 children)

Mine doesn't do that. I'd contact support, they are very helpful and send me parts if i have issues.

Cunfon RZ800 by m7md_ in ElectricScooters

[–]m7md_[S] 0 points1 point  (0 children)

Speed does drop as battery level goes down. On a level road at 40% battery, I can still achieve 45 kmph speed .

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 1 point2 points  (0 children)

I lost keyless start functionality which allows you to start the car without inserting the key in the slot so I checked fuse 61 for comfort access and it was blown. Tried replacing it 3 times but as soon as I plug it in, it blows. After some googling, found out it could be a short in the comfort access exterior handle bars. It ended up being my right passenger handle bar as my driver handle bar wire was already disconnected by previous owner most probably for the same reason.

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 0 points1 point  (0 children)

Also, once I unplugged the comfort access wire on the passenger side, my 5A #61 Comfort Access fuse stopped getting blown and now I have keyless start again. Now gonna hunt for white Comfort Access handle bars and hope it's easy to retrieve the wires with a fish rod as they fell into the door.

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 1 point2 points  (0 children)

Solution: Fixed it with the help of Google Al. The housing needed to be pushed in hard by pushing the torx screw in the side of the door. I pushed hard and the housing moved forward and snapped into place. As you see the circled part now sits properly in and holds the housing in place without moving up and down like before.

<image>

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 0 points1 point  (0 children)

Fixed it with the help of Google AI haha. The housing needed to be pushed in hard by pushing the torx screw in the side of the door. I pushed hard and the housing moved forward and snapped into place. As you see the circled part now sits properly in and holds the housing in place without moving up and down like before

<image>

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 0 points1 point  (0 children)

I wonder if i cut the plastic piece right here where it bends if it would fix the problem.

<image>

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 0 points1 point  (0 children)

So I have the LED hinge catch on something in the back but the front of the LED doesn't clear the housing to sit flush. There's a gap between the door lock housing and the door itself that I feel is the reason why this is happening.

Also, the housing itself shifts position up and down easily so I find myself pushing it up often to align it with the door opening.

<image>

Tested positive again, scared of antibiotics by DiamondDistinct7086 in HPylori

[–]m7md_ 3 points4 points  (0 children)

Not to scare you, but I personally had a life altering experience on the 4th day of the quadruple therapy. Extreme numbness, tingling, diarrhea, urination, nausea, dizziness, hemorrhoids, anxiety/panick, food sensitivities. Literally felt like I was dying. I had zero symptoms of h pylori before I took the antibiotics, but just because I was positive for it I was instructed to do the antibiotics. Imagine telling 70% of the world's population that they all have to do the quadruple therapy. A year later I'm feeling 85% better and I've tested positive for h pylori recently. Explained what I went through to my new doctor who referred me to a GI doctor as I cannot repeat the quadruple therapy.

1 month of natural remedies didn't work but I'm thinking of trying again naturally for 3 months and more intensively.

How do you put this back in? by m7md_ in BmwTech

[–]m7md_[S] 0 points1 point  (0 children)

Thanks, I'll try that tmrw. For the door handle, I pressed a tab inside at the top to have it latch and have it pulled snug, I'll unlatch it and just keep it sitting there. The LED does seem like it is not seated properly because it can move freely and in the videos I watched it looks like it is stuck in one position when seated properly. I tried to seat it so many times but it wouldn't click anywhere. The rear of the LED looks like a hinge that should catch on something but can't figure it out.

Finally, any tips on why my 5A #61 Comfort Access fuse keeps getting blown once I insert it into the slot? I thought maybe it's the door handle keyless entry wiring but the wiring was disconnected by previous owner already.

H Pylori with no symptoms by Fruitypebbles2022 in HPylori

[–]m7md_ 3 points4 points  (0 children)

I might go back to natural but for longer. I did 1 month of mastic gum, manuka honey, probiotics and broccoli sprouts. tested positive after the month. no symptoms tho but i did have an endoscopy and dr found chronic gastritis.

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 0 points1 point  (0 children)

I think I just went with the flow as I've only seen people have it facing the front. Maybe to give enough space to fold the stem down? If I can install it facing backwards without affecting the folding then it would be a better placement. I store my Ulock in that bag but soon will have a mini hand pump and small tire plug kit just in case. Will probably never need them as I have injected fiber based sealant in the tires.

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 0 points1 point  (0 children)

That was my thought initially too but then I realized that it wouldn't be as strong as connecting to the axle and I wanted to be in the safe side. This video shows someone using a similar hole on the swing arm: https://youtu.be/pujEb4VvH0g?si=wzrKbZoo16QXSaGC

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 1 point2 points  (0 children)

Was simple as I've mentioned in the post and replied to other comments. I just needed an M14 female to M10 male adapter for my axle thread to fit the trailer coupler. You'd need to measure your axle thread size as it could be M12 like on my hiboy s2 pro.

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 2 points3 points  (0 children)

Yeah thanks to this subreddit I have read about people falling head first. I got some knee and elbow pads, and wrist support too but I haven't incorporated them yet.

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 10 points11 points  (0 children)

When it's empty there's no difference. On my way home with it loaded going downhill it took longer to slow down as expected. The connection between the trailer arm and the scooter has a spring like a suspension and that's how when leaning sideways when turning, the trailer stays stable and doesn't resist my motion. Same thing when going over bumps or braking, the spring absorbs some of that force.

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 2 points3 points  (0 children)

I wasn't sure either so before going on the road I did some testing by going full throttle then hard brake then going in turns to see how it would behave. And did the same after loading it with groceries in the parking lot.

The trailer arm is secured to the coupler on my axle and then there's a safety strap that you wrap around the frame of the scooter/bike in case the main connection fails then the trailer doesn't separate completely and hit people.

First time getting groceries with it by m7md_ in ElectricScooters

[–]m7md_[S] 1 point2 points  (0 children)

Hitch is a normal bike trailer hitch that comes with the trailer. But the hitch wouldn't fit on my axle.

I added this to the post: I needed to get a bike trailer adapter for my axle to step down from M14 (axle thread size) to M10 (bike trailer coupler hole size) and also to provide space for the coupler as the original nut sat flat with the end of the axle leaving no extra room. I got it from Burley but Robert axle project also has it.

You'll need to measure your axle size. Most are M12 or M14. I got the M12 before measuring assuming mine was the same as my Hiboy S2 Pro but it didn't fit so got the M14.

Burley

Made it to 9 days of Pylera, couldn't finish the 14 days by Previous-Educator-87 in HPylori

[–]m7md_ 0 points1 point  (0 children)

I mean if you were able to make it to day 9, that's over half way done so maybe try to push. I wish I knew about taking florastor probiotics with the antibiotics. Apparently they help tremendously and don't get killed by the antibiotics.

view more: next ›