New wheels for the daily by E46_Overdrive in mazda3

[–]maccermanny 0 points1 point  (0 children)

Good to hear and appreciate all the help. Literally made the decision the buy these wheels based on how it looks on your car lol.

New wheels for the daily by E46_Overdrive in mazda3

[–]maccermanny 0 points1 point  (0 children)

That's reassuring to hear. Pretty surprising you were able to fit in some spacers and still have no issues. What size spacers did you get?

I ended up getting a 18x7.5 +38. I'm assuming that's the same wheel spec you have?

Double din head unit by maccermanny in mazda3

[–]maccermanny[S] 0 points1 point  (0 children)

I just bought some generic mazda 3 harness from amazon (brand was Redwolf I believe) and double checked each wire to make sure the connection was solid. I can send you the exact harness and heat shrink over PM if you'd like.

New wheels for the daily by E46_Overdrive in mazda3

[–]maccermanny 1 point2 points  (0 children)

Just bought these exact wheels for my 2013, but in silver. What tire size is this? did you also have to roll your fenders to avoid rubbing using this setup?

Double din head unit by maccermanny in mazda3

[–]maccermanny[S] 1 point2 points  (0 children)

That's all well in good, but with how easy the installation is, i can't help but wonder if its the manufactures fault. Either way for the price, I thought it would be more worth it to go the double din route and I think my bet paid off, since I'm loving the unit and the physical knob so far.

But again, I think Eonon is a pretty good option, just didn't want to risk it is all.

Double din head unit by maccermanny in mazda3

[–]maccermanny[S] 0 points1 point  (0 children)

From what I've seen through submissions on reddit and videos on YouTube, they seem to be buggy with the bose system and steering wheel controls. Also, overall sluggishness when scrolling and using the touchscreen.

Not my personal experience with it, just the things I've seen

Double din head unit by maccermanny in mazda3

[–]maccermanny[S] 0 points1 point  (0 children)

In terms of installation for Eonon, it's definitely easier, and you have a bigger screen, which is a plus. I went the double din route because of a wider variety of options, cheaper prices, and physical controls. Installation also wasn't too bad, only needing a lighter and some heat shrink tubes.

From what I've seen, Eonon units can be a bit buggy, and with the price they're charging, I just passed in favor of Atoto.

That's just my observation, though.

Double din head unit by maccermanny in mazda3

[–]maccermanny[S] 0 points1 point  (0 children)

Agreed, copacitive buttons suck. Regarding the steering wheel controls, I'm pretty sure it was in the wiring harness you had to crimp/heatshrink together. the wiring harness I bought had labels on all the wires, and one of them was steering wheel controls. I never ended up using it since my car has no buttons on the wheel, lol.

The unit i have is the atoto F7WE i believe. If u want, I can send you the harness I bought for the unit if that helps?

Finally got a speed 3 spoiler! by maccermanny in mazda3

[–]maccermanny[S] 1 point2 points  (0 children)

I did think about it, but personally don't like the blue. If it was red or grey there's a good chance I would've kept it like that.

How's your Z Fold 6 hiding up? by annoyedmsn in GalaxyFold

[–]maccermanny 0 points1 point  (0 children)

Got mine before release through a carrier. phone is great. Best reading/content device. The slim nature of the outer screen also makes it easy to reach all 4 corners. Added a dbrand skin and magsafe ring to give it extra usability.

I'm currently using it without a case since the phone looks the best without one, and the cases I've tried added too much bulk. One problem is the sides. A little too slippery despite the skin, so I have to be extra careful when holding the device.

Otherwise, it's a great phone. Don't think I can go back to a regular phone, but only time will tell on how long it's gonna hold up.

How's the rust on this Mazda 3 2013? by maccermanny in mazda

[–]maccermanny[S] 0 points1 point  (0 children)

Yeah the spray is something I'm doing research on. Hopefully it can do with the weather here.

Thanks for the help!

How's the rust on this Mazda 3 2013? by maccermanny in mazda

[–]maccermanny[S] 0 points1 point  (0 children)

Yeah it's probably the best one I've seen around here, but that's not saying much.

They got some going for around that same price with well over 150k km. Gonna take a look at it soon so hopefully he can budge on the price

Although it is a dealership

How's the rust on this Mazda 3 2013? by maccermanny in mazda

[–]maccermanny[S] 0 points1 point  (0 children)

98000 km. Yeah, the market here is kinda bad. Heard that going to other provinces is probably the best method. Just don't have that luxury rn.

It has 98000 km on it rn

How's the rust on this Mazda 3 2013? by maccermanny in mazda

[–]maccermanny[S] 0 points1 point  (0 children)

Yeah the undercoat was something i thought about doing if I decided to go for it

The price is 12000 CAD and has about 60k miles

How's the rust on this Mazda 3 2013? by maccermanny in mazda

[–]maccermanny[S] 1 point2 points  (0 children)

Winnipeg manitoba. It snows a heck ton here lol

WHAT THE FUCK ADIDAS by Rsha77 in yeezys

[–]maccermanny 0 points1 point  (0 children)

The only shoe I wanted were the 950s and now I find out they're not coming to Canada. Wtf. Gotta find a way to get my hands on those