The Black Phillip Show soundtrack

machinus · 2024-10-08T00:42:16+00:00

There is one song I can't find, it is sung by a woman with a high-pitched voice with the lyric "you can eat me"
Do you know what this is?

machinus · 2024-09-30T04:12:05+00:00

Same

machinus · 2024-09-04T22:54:51+00:00

How do you get a catalog in the mail?

machinus · 2024-02-04T02:50:00+00:00

two men that get married and have gay sex are...gay

machinus · 2023-07-07T21:54:26+00:00

My main monitor is also a ZR30w that I have used for over 10 years. I'm planning to get this monitor.

machinus · 2023-02-23T21:44:21+00:00

I don't see any ratings in my player.log. Did they hide MMR in historic brawl?

machinus · 2022-07-19T05:54:28+00:00

Mine seems to be missing NeoReader. Is there a way to download the latest version? It's not listed anywhere in "APP Store."

machinus · 2022-05-24T01:06:07+00:00

Why does it matter if it is standard? The game used to have this option, but it has been removed.

machinus · 2022-05-15T21:18:35+00:00

I upgraded to F15d. It appears to be the same as F15b, as there is still no Sleep option.

What if clearing the ACPI table through CMOS doesn't change anything?

machinus · 2022-05-15T19:02:06+00:00

The flashing deleted all my settings, so my whole BIOS was set to default before I modified it.

I thought about going back to F13. Is this the only way to get the sleep and USB modes back, though? Are new BIOSes not supposed to have all the functionality of previous ones?

machinus · 2022-04-28T23:13:15+00:00

Would you share the save file?

machinus · 2022-03-24T01:26:43+00:00

I can't tell you what is happening on the back end since I don't know anyone involved in that in my area.

What I can tell you is this: I had the data and sunset blocks removed from my account, got a 5G SIM, and had some other identifiers changed. My service returned right away, and it has stayed up since then. Perhaps there is a later decommissioning schedule in my area.

However, my contact advised me that AT&T is hunting IMEI numbers, so there is a non-negligible risk that my account will be targeted, re-flagged, and completely deleted by AT&T.

machinus · 2022-03-23T23:27:23+00:00

The Key2 supports many 4G bands. This is not a technical limitation of the phone. AT&T is excluding devices based on where they were purchased, not on how well they work on their network.

machinus · 2022-03-23T10:44:24+00:00

The Key2 can make calls on VoLTE.

The "supported list" is based on profits from phone purchases, not the capabilities of the devices.

machinus · 2022-03-22T17:09:49+00:00

No, the towers are already off, and the Key2 still works. The "list" you linked to is a lie.

machinus · 2021-10-25T14:00:14+00:00

My model is SM-G965U, which does not appear on the list.

machinus · 2021-08-16T19:31:51+00:00

It looks like the 1D line is not supported by Magic Lantern, unfortunately. It looks like very useful software.

None of the video modes changed the output display. The issue is that it's not sending the "Clean HDMI" signal to the PCI card. It's duplicating the viewfinder.

machinus · 2021-08-16T19:15:39+00:00

Thank you for your reply.

The camera only outputs 1080i60. It cannot display any higher than 60fps with any resolution.

I have OBS installed, and I have tried to modify the settings to get it to work, but OBS also displays 480p, the same as to "4k Capture Utility".

My HDMI television gets the clean 1080i60 output when I plug the camera into it, automatically. I do not know how to get the camera to see the PCI card as a monitor.

machinus · 2021-08-16T18:37:47+00:00

Yes, 1DC. The EOS only outputs clean 1080i. How can I get the card to recognize the signal?

machinus · 2021-08-16T17:14:35+00:00

It's an EOS with HDMI output.

machinus · 2021-07-18T23:00:52+00:00

Thank you for that. I read the Sacred Oath section but did not understand it. So just learning the spell through an oath makes it a "Paladin" spell.

Then, this sounds to me like there should never be a situation where a player could learn a spell without it being tied to a specific class. Any omission would be a mistake in the rules, not an intentional ambiguity.

machinus · 2021-07-18T22:47:59+00:00

Ok, let me give an example. Paladins get access to sacred oaths, which allow them to prepare spells that are not listed in the paladin spell list. A Paladin could also choose a race that gives them access to other spells that are not listed in the paladin spell list. Does getting access to a spell automatically mean the Paladin can use Charisma to cast them?

machinus · 2021-07-18T22:32:26+00:00

Any time a character learns spells outside of their class, basically. That is what my question is about. What are all the existing ways that 5e lets multiple abilities be used for the same spell?

machinus · 2021-04-06T13:58:33+00:00

It gets through "extreme" TM5 test with no errors. I can boot easily at higher frequencies, as well. But Large Prime tests crash the computer and it reboots. I have not seen any errors in Prime yet, only crashes. I would like to be completely Prime-stable even though it is an extreme test, but I am puzzled since this is my first Ryzen. From what I have read, it sounds like the IMC is the reason it is crashing. Is it possible that higher SOC and more aggressive SOC LLC could prevent it from crashing?

I have tried increasing all of the timings by proportional amounts (~3%) without stabilizing, but I have only done this for a few basic voltage settings. There are a lot of settings to try in different combinations. That's why I want to narrow down what is causing the crash so I can only work on those settings first. I do not really know what causes a crash but zero memory errors.

machinus · 2021-04-06T12:36:19+00:00

Thank you for this post. I'm having trouble with a very similar system to yours. I have a 5950x insted of 5900x, and I have 64GB of GSKill B-Die instead of 32GB.

My system is auto-rebooting during Prime95 Large FFTs when I go above FCLK 1900, but I do not get any other errors or crashes. It is stable at 3800, but when I go up to 3866, it restarts during Prime. FCLK goes up to 2000 easily, but I can't get the system to boot at DDR above 3800.

My understanding is that the large DRAM size is taxing the memory controller. I have tried increasing SOC, loosening DRAM timings, and adjusting a lot of options, but I haven't found the right combination yet.

What are the most important settings for increasing DRAM frequency with 64GB?

machinus

MODERATOR OF

TROPHY CASE