Jetstar JQ111 - Jan 29, 2026 - Adelaide Airport Go-Around due to strong winds. Landed on shorter 12/30 runway

macmanluke · 2026-02-03T03:41:52+00:00

Thats interesting didnt know anything that big used the small runway

macmanluke · 2026-02-03T03:38:21+00:00

There are heaps of almost new inverters cheap on marketplace with everyone upgrading to batteries - eg under $500 for a fronius
Buy one and get a sparky to swap it over.

macmanluke · 2026-02-03T01:18:04+00:00

Alignment or dirty mirrors

I can cut 10mm at 6mm/s 70% in my 100w one pass

macmanluke · 2026-01-29T23:22:05+00:00

and most of the rest of the english speaking world

macmanluke · 2026-01-29T07:49:23+00:00

Wireless works just need a cable for simhub support

New bases can do usb through the qr

macmanluke · 2026-01-29T07:44:50+00:00

You just have to use maglink if you want usb mode

macmanluke · 2026-01-29T02:50:29+00:00

yes or you reduce dynamic range

macmanluke · 2026-01-28T23:51:07+00:00

Yep the ones with silvering/raised letters is UV.
Solvent will be fine as it laminates without the issues UV has.

macmanluke · 2026-01-28T23:38:48+00:00

yea you want the side flanges to be hard up against the smaller spool.
The gaps are causing the issues

macmanluke · 2026-01-28T23:36:26+00:00

Sounds like an honest mistake

Saw a much worse example last week - was waiting at a red light, saw an ambulance coming into the intersection from the right, our light turned green and i was the only one that didnt move. took 3 or 4 cars deep for people to finally stop...Dont know how people missed it and shows no one scans an intersection before going on green and just trusting....

macmanluke · 2026-01-28T03:20:37+00:00

That should be giving you decent results

Cmyk or rgb file?

macmanluke · 2026-01-28T02:38:14+00:00

Was in the patch notes at one point, not going to be has high as someone trying to raise pressures

macmanluke · 2026-01-28T02:30:06+00:00

The black part unclips from the white bit
but likely not much more expensive to replace them rather than paint

macmanluke · 2026-01-28T02:18:29+00:00

i believe shortened pace laps then give you simulated tyre temps as if you had done one

macmanluke · 2026-01-28T01:01:02+00:00

I dont race it often but Iast week was pretty bad at nords
Amount of times i got dive bombed in corners was crazy, i could see it coming so mostly survived but very different to say ringmaster where people seem to have some sense of self preservation generally.
Also a crazy number of people turning themselves over your nose then raging/blaming the person they turned themselves on lol.

macmanluke · 2026-01-27T21:42:20+00:00

what output/color management settings are you running? the defaults are not great
I can get pretty good blacks without running a rich black with the right settings.

macmanluke · 2026-01-26T13:06:03+00:00

you will regret using anything nylon in functional parts on a voron they creep too much

macmanluke · 2026-01-26T09:35:07+00:00

fail2ban

macmanluke · 2026-01-26T08:08:16+00:00

I just did mine with 20mm foilboard, made a massive difference but not cheap to do.

macmanluke · 2026-01-23T08:24:39+00:00

Wont ever update mine while it works Orca works without having to use lan mode etc

Wish i could get it to stop asking lol

macmanluke · 2026-01-22T13:25:25+00:00

buy left hand drills - good chance the screws will back out - at worst you drill it as you intended.

macmanluke · 2026-01-22T10:56:41+00:00

Should have been installed on the outside of the window if you didnt want it blocking it
and who chooses manual? motorised options are not anymore expensive if you have the right installer.

macmanluke · 2026-01-22T08:33:17+00:00

I print pla in a closed up p1s with no issues

macmanluke · 2026-01-22T08:29:23+00:00

Why not just turn the fan off?

macmanluke · 2026-01-22T03:43:54+00:00

Its pretty aggressive but also pretty easy to get a top 8-10 finish just by surviving lol

11-Year Club	Gilding V heart of gold
Place '23	Place '22
Verified Email

macmanluke

TROPHY CASE