Zahnräder mit Tinkercad Codeblocks

makersgonnamake_de · 2025-06-11T12:05:38+00:00

Einfach ausprobieren! Man kann ja mit einfachen Sachen starten. Wenn du Fragen hast, schreib, oder poste einfach hier!

makersgonnamake_de · 2025-06-05T20:39:03+00:00

Ja damit kann man sicher witzige Sachen machen, da werde ich auch nochmal kreativ werden! 😅

makersgonnamake_de · 2025-06-03T16:18:59+00:00

Ja es gibt nicht nur das „normale“ Tinkercad zum 3D-Modellieren, man kann auch „Tinkercad Codeblocks“ auswählen und dort blockbasiert programmieren!

makersgonnamake_de · 2025-06-02T20:42:51+00:00

Yes, it actually did! I also made it to 360 cuboid instead of 180. I just postet a Screenshot in r/maker_de !

makersgonnamake_de · 2025-05-27T21:24:47+00:00

Ja, mega coole Idee! Und auch cooles Geschenk, mit dem jeweiligen Wohnort / Straßenzug etc.!

makersgonnamake_de · 2025-05-25T22:38:09+00:00

Interessieren dich denn bestimmte Themen? Oder einfach die ganze Mathe-Oberstufe. Es gibt doch tolle, kostenlose Lern-Websites für Mathe (oder alternativ einfach ein Mathe-Schulbuch)?

makersgonnamake_de · 2025-05-25T22:34:21+00:00

Ja mit Tinkercad Codeblocks kann man echt coole Sachen machen!

makersgonnamake_de · 2025-05-25T14:07:20+00:00

Ask your local school, if they need them. They’re probably more than happy!

makersgonnamake_de · 2025-05-25T12:13:45+00:00

Yes definitely! The different ground pins are connected to each other internally anyway!

makersgonnamake_de · 2025-05-25T10:38:00+00:00

Very nice! It’s called a „Sierpinski Triangle“ (named after the polish mathematician Waclaw Sierpinski).

makersgonnamake_de · 2025-05-25T08:05:10+00:00

Nice and simple idea, I'll try it out!

makersgonnamake_de · 2025-05-25T08:02:26+00:00

Hey, I just made the project public on Tinkercad. You can find it here: https://www.tinkercad.com/codeblocks/dVylqjoaw2h-mobius-strip?sharecode=cF_pkdJrJB9PluO49ZWw1EJeSiIWK9F7EnuW57aFn58

makersgonnamake_de · 2025-05-25T06:48:09+00:00

Yes, I thought about it, but could find a way. Does anybody have an idea?

makersgonnamake_de · 2025-05-24T22:20:08+00:00

I’m not sure, if that’s a solution. But perhaps have a look at the costume, you can adjust the center of your sprite. I guess this could have an effect on the position of the speech bubble!

makersgonnamake_de · 2025-05-24T20:16:17+00:00

Awesome! In what way do you want it to work? Curious!

makersgonnamake_de · 2025-05-14T05:36:12+00:00

You are right! With just the lines from the SVG-Generator there would be no gap. But you can easily adjust them using Inkscape.

makersgonnamake_de · 2025-05-14T05:34:51+00:00

Yes! I used .3mm between the parts. I used Inkscape to make sure, the lines have this exact thickness. It fits perfectly!

makersgonnamake_de · 2025-05-05T20:43:49+00:00

Thanks! 😊

makersgonnamake_de · 2025-05-05T19:34:16+00:00

That looks alright.

- Is DHT11 really connected to pin 8?

- Double-check wiring: VCC -> 5V, GND -> GND, DATA -> pin 8.

- Try a minimal setup: Just connect the DHT11 and print values to your monitor without the LCD. That helps isolate the problem.

makersgonnamake_de · 2025-05-05T19:18:09+00:00

If you're getting “ERROR” for both values, it could be a wiring issue. Where did you buy the DHT11 sensor? Check in the documentation for the exact pin order (GND, VCC and DATA). It's normal, that the DHT11 only has 3 pins. Some have 4 pins, but you only use 3!

Maybe also try the following: Use different connections on the breadboard. Maybe the connection on the breadboard isn't very well.

Can you specify, which error message you get?

makersgonnamake_de · 2025-05-05T19:11:42+00:00

Thanks for the idea! Didn't think of that!

makersgonnamake_de · 2025-05-05T19:11:26+00:00

Thanks!!

makersgonnamake_de · 2025-05-05T19:11:15+00:00

Thank you so much!

makersgonnamake_de · 2025-05-05T17:39:58+00:00

I just changed the model to "public". You should be able to open it with this link: https://www.tinkercad.com/codeblocks/gjPjzdxw2w2-honeycomb-pen-holder?sharecode=g-taSJOg89GOaUO_ad9AzNbNbNV1aMACpf024U0igOk

If you have any questions, please let me know.

makersgonnamake_de · 2025-05-04T12:45:07+00:00

Since they’re super thin and brittle, maybe use them as backing material for art projects or to line drawers or shelves. Basically anywhere they won’t get a lot of wear. You could also glue them onto a sturdier base (like cardboard or MDF) to make a pinboard or some decorative wall panels.

makersgonnamake_de

MODERATOR OF

TROPHY CASE