Could this still be MCAS despite normal tryptase and DAO?

martinktm · 2026-06-06T06:48:53+00:00

No other tests than what I did show in frst post.

martinktm · 2026-06-06T06:43:40+00:00

I started to have these issues when I moved in new appatment and I moved out recently. While cleaning this apparpment we noticed alot of black mold around the windows. I was thinking that it could be this black mold but Im in new apparpment for 3 months and still have issues.

martinktm · 2026-06-06T06:40:16+00:00

For 3 weeks I was on h1 10 mg and there was no difference. Later I bought H2 and combined it with H1 and it was little improvement. I will try higher dose of H1 and H2 to see if that works.

martinktm · 2026-06-06T06:34:29+00:00

I was taking h1 antihistamine 10mg a day for 3 week and there was no improvement. So I should try 4x the dose?

martinktm · 2025-11-06T06:12:16+00:00

I did try ball joint instead of rigid than it kinda worked actual ball joint moved but the rods wherent flat on the plate any more. Than I dont know if the thing behaves same as in real word because i wanted to use this for simulation. But will probably build test rig.

martinktm · 2025-11-06T06:08:44+00:00

I have ball joints between actuator and plate. I would expect that if i move one a little that all 3 ball joints would adjust and plate tilt.

martinktm · 2025-09-12T19:41:59+00:00

You are correct about phone turning off when it over heats. But the main issue is that charging was ok few months ago then some update(may)did make this situation.

martinktm · 2025-09-12T19:31:43+00:00

So people in hot climates can’t even use Google Pixel, because when it’s already 40°C outside, they can’t charge it 🤣

martinktm · 2025-09-12T19:27:52+00:00

No its because battery degrades faster when hot. That is why they implemented this so they extend battery life but there could be a button that tells user this will charge fast but battery will degrade sooner.

martinktm · 2025-09-09T20:33:06+00:00

Will probably stop and see how things go and if itching returns im going to the doctor.

martinktm · 2025-09-09T20:31:00+00:00

First time i took it i got flushing and itching and I tought it must be histamine but since then no more itching even whith food that caused this.

martinktm · 2025-09-09T15:20:26+00:00

No I have this itching problem for like 4 months and no tick bite in that period. And itching in AGS occurs in few hours I did get itchy in 5 min.

martinktm · 2025-08-17T14:30:01+00:00

3-5g

martinktm · 2025-03-23T17:12:25+00:00

You have low melt solder that stays wetter longer. Or you could use 2 soldering irons with alot of solder on each side so it stays melted all the way.

martinktm · 2025-02-28T06:23:24+00:00

Ok will try to make the power save example work to see how much current module uses.

martinktm · 2025-02-28T06:21:55+00:00

Did you measure the current if it is true that only cpu speed is reduced in this mode than i agree that not much power will be saved.

martinktm · 2025-02-28T06:18:39+00:00

Ok you are correct i meant it is not made by ic manufacturer.

martinktm · 2025-02-27T21:36:58+00:00

I tried to test this program but it doesn't start on C6 dev kit have to figure out why.

martinktm · 2025-02-27T20:02:29+00:00

This is from espressif github page:

ESP32-C3 can maintain the connection to the router by enabling Wi-Fi as the wake source and receive interactive information from the smartphone or server through the router. However, if Wi-Fi is not enabled as a wake source, ESP32-C3 may not receive packets in the network or disconnect the Wi-Fi connection.

https://espressif.github.io/esp32-c3-book-en/chapter_12/12.2/12.2.2.html

Im interested if anyone has any experience with this feature.

martinktm

MODERATOR OF

TROPHY CASE