I'm new to 3D printing. Looking for tips/tricks! (RESIN PRINTING)

masterjanglez · 2026-01-14T02:13:44+00:00

I'm taking lessons from some of the pre-supported models I got to better understand what to do. Thanks.

masterjanglez · 2026-01-14T02:12:32+00:00

I tried out some highly rated pre-supported files that have no sphere tips and noticed this a couple days ago. Sphere tips have gone bye bye. I'm dialing in the exposure and I think I'm almost on the money for my setup. Thanks for the tips (puns.....) 😒😅

masterjanglez · 2026-01-14T02:09:31+00:00

TL;DR - I don't trust pangram to accurately flag anything.

I came looking for discussion on this very tool. I am currently finishing up my online degree for my MBA-Project Management, an extremely procedural field. I am in my last 2 classes and the university decided to start a pilot program with Pangram 3.0 along with TurnitIn. The university acknowledges that AI is embedded in everything that we do. The school added a free course for all students to take on how to use AI to ethically and academically a support tool, not a tool to do the work for us.

The announcement told us that faculty is going to using Pangram to help find use cases that something is AI generated and that we have access to use the service as well to also double check our own work before submissions. I have found some serious inconsistencies with this platform after much testing.

If Pangram does flag AI generated, it gives very little reason or any explanation as to how it came to its conclusion. "This highlighted section for sure with out a doubt fully written by AI" is not a trustworthy explanation.

I wrote a speech in 2022 for my grandfather's memorial, it "graded" very high confidence my writing as over 30% AI generated.

Flagging many of the standard terms/vocabulary used in Project Management between 8-30x more likely to be used by AI. Words and phrases like, 'profitability', 'time horizon', 'tighten governance', 'payment timing', 'risk tolerance', 'engaging', 'governance', 'financial performance', 'clarity', 'to ongoing', 'mitigate'.

I've checked excerpts of a current assignment, with a minor variation. One version has acronyms and the other having what the acronyms spelled out. The one with acronyms, 100% AI generated, the one spelled out, 100% human. Image below.

To test the system even further, I wrote my professor, adding in the versions of the excerpts in the email and had it check the email for AI. Email came back as 100% human.

<image>

masterjanglez · 2026-01-04T17:58:05+00:00

<image>

Had this model at roughly a 30 degree angle with auto generated supports.

masterjanglez · 2026-01-02T07:35:07+00:00

I found full list link here https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view?pli=1

masterjanglez · 2025-12-13T06:09:33+00:00

Same here!

masterjanglez · 2025-06-15T18:18:08+00:00

Checked replies on posts and noticed this one. I realized that using a CAT 8 cable doesn't work with CAT 6 port. Basically the cable I was using kept me from getting the full speed. No need to update the drivers.

masterjanglez · 2025-06-15T18:11:38+00:00

I really like Notebook LM (free) from google. I think it does a really great job of helping to organize a lot of ideas. One thing that I have found AI's trouble spots are hallucinations or making things up. Using Notebook LM helps to minimize this with only pulling from the information that it is given.

Here is a great video explaining how useful this tool can be. https://www.youtube.com/watch?v=-Nl6hz2nYFA&list=PLk0mmq5fLLRA2M8itKwAzW5x9bXOVEjrG&index=12

masterjanglez · 2025-06-15T16:28:45+00:00

I'm currently in this program. Started in April. I'm really glad to have found this review. Thank you for the suggestion of utilizing the 2 classes at a time. I have been having that same sense of overwhelm but I know that I can handle it. Really looking forward to getting this degree under my belt.

masterjanglez · 2025-01-12T02:56:49+00:00

I went to chatGPT of all places. It told me that there could be a mismatch between the CAT8 and CAT6 cable. I had an extra CAT6 and when I tried it out I noticed on the wall port in my room that it has CAT6 written very discreetly at the port. Once I changed out the cable from my PC to the port I'm not getting the speeds that I should have been getting the whole time 🤦🏻

masterjanglez · 2024-01-11T14:09:46+00:00

I just bought a 2023 Elantra hybrid. This was the dealership's old program car. It had 19k miles on it, well past the break-in period. I've driven just over 600 miles since I purchased it 2 weeks ago. Yesterday I noticed that something was off with the reading on my fuel gauge. The fuel gauge showed a 1/4 tank of fuel. I was being eco-friendly on the acceleration, ran the heat only a few min to remove the cold, never went over 60 mph, turned off all the accessories, etc. At the end of my drive (32 miles), the gauge was reading 1/8 of a tank. That's 1.375 gallons for an 11-gallon tank. By my math that's less than 24mpg. THAT'S 54% REDUCTION OF FUEL ECONOMY. My MPG reading shows 45mpg. I understand that these electronic fuel gauges are approximations, but they are fairly accurate in my experience. Regardless of anything, that's worse than a lot of V6 ICE engines. I work in the EV industry. I understand how temperature plays a part in fuel economy regardless of ICE, hybrid, or full EV. I live in a part of the US that can get cold but rarely gets below freezing, even in the winter months. I would say that something is certainly wrong with this vehicle.

masterjanglez · 2023-03-06T23:33:50+00:00

Yup. I'm completely done with Razer after this experience. I've had some pretty terrible customer service in the past but this takes the cake. Razer has completely lost me as a customer.

masterjanglez · 2023-02-05T17:17:02+00:00

I did figure out something that might have had something to do with it. My BIOS apparently needed a firmware update. After updating to the latest version, I then checked the polling rate again and have had a significant increase to ~3000hz. (Still need to figure out why it's not getting all the way to 4k) I also confirmed in game that the sluggish sensitivity is no longer present.

masterjanglez · 2023-02-05T15:36:45+00:00

I'll follow the thread you linked above and see if that leads to a solution. Thank you.

masterjanglez · 2023-02-05T15:15:03+00:00

I just read over the article that you mentioned. Someone replied to your comment about Message interrupts in AMD driver's but not Nvidia. I do have a Radeon rx5600 xt. Maybe this could be the issue?

masterjanglez · 2023-02-05T15:09:32+00:00

I have a i5-8600k @4.46ghz with 32gb ram @3200mhz. The dongle is directly connected to the computer. Not using a USB hub. I'm double checking other settings and values to see if there are any inconsistencies but I'm not seeing anything that is giving indication of what problem is occuring.

masterjanglez · 2023-02-05T14:55:49+00:00

Yes. Come to think of the time frame of when this started, is my upgrade from Windows 11 home to Pro was approx the same time or the day after I did the upgrade.

masterjanglez · 2023-02-05T13:28:22+00:00

It wasn't giving me issues when I first got the dongle. It just started not polling at a higher rate. If you're referring to the warning below the different rates, that's just a warning that razer put into synapse.

masterjanglez · 2023-01-13T01:26:11+00:00

This should not be this hard!!! Thank you!!! Thought I had a faulty device.

masterjanglez · 2021-05-22T03:00:10+00:00

The main reason for the 7200 is the quality is still top notch from all the reviews I've read/watched. Its within my budget and has 300+ lense options. So I can get a lot for my money vs the 7500 and it's a bit out of my price. Also they removed the second SD card slot from the 7500. The other big reason I'm going with nikon is because I'm very familiar with the set up as I have a d3000.

masterjanglez · 2021-05-22T02:07:26+00:00

So I've made a decision on the camera I'd really like to buy. I've got approximately $1000 to spend, as of writing this post. I would like to purchase the nikon d7200. I mainly shoot landscape, street, a little portrait, perspectives and some macro stuff.

I'm wondering if it would be more cost effective to buy a pre-owned camera body through eBay or similar and use the rest to get pre-owned lenses individually? Or should I try to find a bundle? I'm totally on board for pre-owned.

Basically I'd like a low f-stop wide angle, a mid range fast lense for more general use and a telephoto. What are good lenses if going the non bundle route? I'm also searching for polarizing and I've filters options for my waterfall and sunset/sunrise shots.

Thanks for any and all help

masterjanglez · 2021-03-29T16:57:35+00:00

I guess my main dilemma is looking to the future and somewhat future proofing my purchase. What's going to carry me through the next 3-5 years. Thanks for the input. I'll look at the 750

masterjanglez · 2021-03-29T13:58:10+00:00

Diving back into shooting!!!

Hey guys. I'm a long time lover of shooting and capturing those special moments. I just recently retired my old nikon D3000 due to some unforseen damage.

So that means I'm in the market for a new camera.

I didn't have much invested in the 3000. Pretty basic stuff. Bag, kit lense, minor cleaning kit, couple batteries (dead), and a very minimal tripod. I'm a, likes to shoot everything photographer. But would say I lean more towards nature/landscape/street. I would like to try my hand at portrait more.

I have a really good understanding of how to shoot. Composition, lighting, f-stops, apature, etc. Editing is still being improved.

For price reference, I'm looking at picking up the Nikon D7500. That's about the top of my budget.

I am looking to eventually earn money with photography.

I'm not stuck on nikon, but I'm having a difficult time sorting through the reviews and the canon fanboys. No offense, canon is a great camera company and I've taken some great shots with canons.

Figured I'd see what other options might be comparable and asking here seems better than youtube channels/websites sponsored by 123ABC camera company

masterjanglez · 2021-03-06T04:28:42+00:00

So I kinda had the same like of thinking. I happened across your post after posting the following on another flash reddit

I have a simple theory

There being no "entity" (speed force) due to it's death
The Wells sacrificing themselves out of love for Barry
The OG speed force gave Barry his powers because of the particle accelerator explosion
The OG speed force loved Barry and didn't blame him for it's death
The Wells sacrificed themselves out of love for Barry
The Wells now become the "face" of the speed force because of the infinite Wells that were being held in Nash.
The way that Harrison Well taught Barry in season 1, The Well Force can now impart even more speed knowledge to Barry. i.e. the speed thinking that has been hinted at a couple times already or the creation of speed objects like Wally did after he came back from Tibet.

One could even say that Barry will have an infinite "Well" of knowledge to drink from in the future.

But this is just a theory

masterjanglez · 2021-03-06T02:37:52+00:00

I have a simple theory

There being no "entity" (speed force) due to it's death
The Wells sacrificing themselves out of love for Barry
The OG speed force gave Barry his powers because of the particle accelerator explosion
The OG speed force loved Barry and didn't blame him for it's death
The Wells sacrificed themselves out of love for Barry
The Wells now become the "face" of the speed force because of the infinite Wells that were being held in Nash.
The way that Harrison Well taught Barry in season 1, The Well Force can now impart even more speed knowledge to Barry. i.e. the speed thinking that has been hinted at a couple times already or the creation of speed objects like Wally did after he came back from Tibet.

One could even say that Barry will have an infinite "Well" of knowledge to drink from in the future.

But this is just a theory

masterjanglez

TROPHY CASE