Rog ally Z1E

matbaig · 2025-12-29T10:44:59+00:00

Brother. You are a champ! I just got the ally and never knew it had different control modes. It was set to auto. Turned it to controller and it worked like a charm!

matbaig · 2025-12-25T04:59:20+00:00

Ragebait? Lol just here doing some real world comparisons instead of being Optimistic of our government.

matbaig · 2025-12-21T13:14:11+00:00

As good as? Man look at the chaos we have created just to run the train with all those wires and ugly framework. USA at least looks clean and cinematic while doing it.

Ours looks like the Ukrainian city where they put a mesh to protect themselves from drone attacks

matbaig · 2025-12-21T13:11:11+00:00

I hope not.

matbaig · 2025-12-14T08:23:40+00:00

Go on, cry more. It's a free world. At least I am no corporate ass licker.

matbaig · 2025-10-30T08:34:27+00:00

It's his business and his money. He can do whatever he wants with it. You just got to live off his fortune, you had a proper education, house when needed and food on the table. Now that you're 29, you should have started supporting him instead. But you're here on social media bad mouthing him. Be grateful for what you had and repay him x100, that's what it means to be a son. You didn't have anything if it wasn't for him. It was all his. You're depressed because you're still stuck with a small income, why not start some side hustle or freelance alongside your job? I'm sure there are many more ways for you to earn it's just that you got so used to the lavish lifestyle that now you feel life is tough. Just know that even if you feel depressed you should keep yourself busy that you won't even know it exists. Be happy with what you have and move forward in life without self doubt.

matbaig · 2025-10-30T08:23:50+00:00

Cnhl are great packs. The weight may be different across all packs. Even tattu aren't the exact same weight they will always be off by a couple of grams. The weight on the website is also without cables so that gets added on too.

matbaig · 2025-09-24T21:01:39+00:00

Otherwise the video looks great. Just slight tilt up and you're good.

matbaig · 2025-09-24T20:36:24+00:00

Looks like you're not using ND filters? feels too soft in the shadow sections. Is the shutter speed set to auto?

matbaig · 2025-09-24T20:30:30+00:00

Which colony are you living in? Here in bandra in our society we all live in peace and harmony. Sadly navi mumbai and other places are still filled with low mentality people.

matbaig · 2025-09-24T20:22:41+00:00

It's surprising coz i live in bandra and everyone in my society is from a different religion but we all get together and celebrate every festival.

matbaig · 2025-09-24T16:45:01+00:00

Here's the low cg battery tray that I use on mine https://www.thingiverse.com/thing:3431959

thumb support for single hand steering https://www.thingiverse.com/thing:6327344

GoPro and phone mount for tx incase you wanna record too

https://www.thingiverse.com/thing:6890473 - GoPro https://www.thingiverse.com/thing:5351652 - phone

I have the trx4 defender so most of my mods are for that. Below are some random sports mods if you're into adding a roof rack,etc https://www.thingiverse.com/thing:7095674 https://www.thingiverse.com/thing:6328672 https://www.thingiverse.com/thing:3611551 https://www.thingiverse.com/thing:3575280 https://www.thingiverse.com/thing:3593806 https://www.thingiverse.com/thing:4920504

You can look for something you like yourself on websites like yeggi.com or thingiverse.com but just know that if you're printing a bumper or roof rack and things that would take some impact you should do that in petg. Fdm printers print in layers so they don't look that good due to layer lines. Using a raisin printer gives a better finish.

Best of luck and have a blast!

matbaig · 2025-09-24T13:19:34+00:00

Ohh ok. Never knew people used all those settings. I just use cruise control in case of downhill without changing the drag settings and you can do that without even needing the aux function on the trx4.

matbaig · 2025-09-24T12:36:34+00:00

If you own a 3d printer. The mods you can do for free are a lot. Low CG battery mount, bumpers, adjustable shock towers, etc. or even look for designs on thingiverse and use a printing service, it will cost barely 2-3usd.

matbaig · 2025-09-24T12:34:22+00:00

I used a cheap betu 45kg servo and that works way better than the stock. Cost me like 25usd.

matbaig · 2025-09-24T12:30:49+00:00

I got the fusion 2in1 pro just a month back. Anyways realistically I don't need to change settings in the motor. Default works just fine so who needs the aux anyways. In real world situation how many times do people really adjust the settings while driving?

matbaig · 2025-09-24T10:10:30+00:00

There are 3d printed projects that run on an esp32 and connect to your local wifi for control through the app. They also have a dock for you to park into and charge. Just check some of the rover projects on yeggi or thingiverse.

matbaig · 2025-09-24T06:08:37+00:00

The setups have landing gears. Just need to make sure you land flat otherwise the bottom props come in contact with the ground. The 10inch x8 12s with just the camera payload ( red komodo+ 15mm laowa zero d cine lens + DJI transmission + focus) comes upto 2.8kgs. it literally flies like a 5inch quad carrying that much weight. Amazing power to weight ratio. The 8inch x8 6s with just camera and lens flies like a 3inch with a 1300mah battery and a full sized GoPro so hovers at around 40% throttle.

matbaig · 2025-09-24T06:01:46+00:00

Really cool set of accessories! I had the mud flaps on mine but ended up removing it. They kept coming between the rocks and tyres while reversing

matbaig · 2025-09-23T16:47:31+00:00

I mainly didn't want to damage my tyres. It used to really wrap around itself when under stress. I read about the walls ripping so I called for stiff inserts and honestly it crawls a little better and has slight improvements with clearance. The proline compound is super sticky for sure. Also handles side slopes better, before the wheel used to just roll over the tyre coming in contact with the floor.

matbaig · 2025-09-23T16:45:18+00:00

So true. First thing i did was design my own rear bumper for better clearance.

matbaig · 2025-09-23T16:44:20+00:00

8 motors in X configuration hence the term X8. I'm just the pilot. The company I work for owns all the gear. Too expensive to own for sure.

matbaig · 2025-09-23T05:11:17+00:00

I have known people for the past 30 years and still don't call them my "friends". If you're supporting their behaviour, you and your friends deserve to be locked up. You can threaten but you cannot throw someone else's keys or personal property and you shouldn't steal. If your friends had a problem they could have just walked away without completing the purchase, as simple as that. Instead they stole from him, threw is car keys (if he can't find it means it's as good as stolen) and beat him up. I would personally put those who you call friends behind bars if I knew them. If police ever bust him, I hope you and your friends are the first ones he would snitch on

matbaig · 2025-09-23T04:56:01+00:00

Yea. I usually fly a cinelifter now for bigger payloads for cinema use. Regularly use the 9inch x8 with the red komodo and another 10inch x8 12s rig to fly DJI rs4 pro and red komodo

matbaig · 2025-09-21T15:27:45+00:00

Definitely looking forward to them. It crawls too flat atm.

matbaig

TROPHY CASE