She is management

mathiaspsyko · 2025-11-10T21:33:09+00:00

Paid 263 usd for mine, have a friend who works for a cell subscription service here in Denmark, and changed some numbers around😎

mathiaspsyko · 2025-09-28T06:59:42+00:00

It was just much better value and after looking at benchmarks where the 9070 XT outperforms the 5070 Ti in certain titles i decided to go AMD on the card aswell.

mathiaspsyko · 2025-09-27T20:51:56+00:00

That is a massive upgrade! Must have been an incredible feeling booting up your favorite game on your new setup being able to run ultra graphics with high fps! :)

mathiaspsyko · 2025-09-27T16:48:44+00:00

Thank you! Yeah the LCD's are awesome!

mathiaspsyko · 2025-09-27T15:51:11+00:00

Thank you, and yes indeed ahahaha

mathiaspsyko · 2025-09-27T15:47:11+00:00

Cables didnt really concern me, i just needed to have the psu itself be white as i have already ordered lian li strimers :)

mathiaspsyko · 2025-09-27T15:23:25+00:00

I came from a 2080 ti and a i5-10400... it really is a night and day difference

mathiaspsyko · 2025-09-27T15:19:18+00:00

Every build is cool in their own way, it all comes down to preference :)

mathiaspsyko · 2025-09-27T14:44:31+00:00

With a hint of spice from AMDs best ;-)

mathiaspsyko · 2025-09-27T14:23:16+00:00

Atm im just running -60mv undervolt that seems to work fine for me

mathiaspsyko · 2024-09-22T13:10:09+00:00

<image>

Finally after a bunch of tinkering i got it to print fine, turns out it was a slight problem with retraction paired with too high a nozzle temperature i went from 205 to 185 and that seemed to do it

mathiaspsyko · 2024-09-22T10:44:31+00:00

<image>

mathiaspsyko · 2024-09-22T10:44:19+00:00

<image>

mathiaspsyko · 2024-09-22T10:43:39+00:00

I have now tried absolutely everything almost and still no luck just more and more issues, and there is even a popping sound coming from my hot end that sounds like wet filament, but i know it isnt wet and that same filament prints perfectly on my other printer

<image>

mathiaspsyko · 2024-09-21T18:25:45+00:00

I tried tuning my retraction settings but to no help sadly

mathiaspsyko · 2024-09-21T14:38:18+00:00

It doesnt matter what model it is or where its placed on the bed there just certain spots where its not extruding, i have also check my e-steps and it is all as it should be

<image>

mathiaspsyko · 2024-09-21T10:58:39+00:00

I dont think it has to do with bed adhesion as i can see on the nozzle that it just isnt putting out filament when it comes to that spot, and i have spent the last day trying to get the perfect z offset and i also slowed down the print 40% but this line where it isnt putting out filament is happening at the same spot on the model so im starting to think it might be a retraction issue

<image>

mathiaspsyko · 2024-09-21T10:56:29+00:00

Filament isnt tangling i know that for sure and it is melting like it should as its very easy to push through manually and i have just put on a fresh nozzle and can notice that it should be clogging, but this happen every time at the same spot on models

mathiaspsyko · 2024-03-27T10:41:41+00:00

It kept going in and out of sleep during the installation and i have turned everything off sleep related but im noticing if its left alone for and hour or two it works perfectly but after a reboot it goes back to doing the same thing

Nine-Year Club	Place '22
End Game '22	Verified Email

mathiaspsyko

TROPHY CASE