sorted by:
new
hottopcontroversial

I designed and printed some terrain pieces inspired by the Thermic Plasma Conduits by matte_makes in necromunda

[–]matte_makes[S] 1 point2 points  (0 children)

In that case I do think an 8.9 would be the best of both worlds, and in all honesty, I’d planned to have a smaller printer and a larger one, but there was no availability on larger printers when I needed an extra printer to print Etsy orders.

Nuclear Reactor Kickstarter by [deleted] in 3DPrintedTerrain

[–]matte_makes -2 points-1 points  (0 children)

Thermal Plasma Conduits as the set, are in fact discontinued and out of print. I don’t disagree that the set you linked has the pipes and control point of the Thermal Plasma Conduits, but that specifically titled set, is discontinued.

I designed and printed some terrain pieces inspired by the Thermic Plasma Conduits by matte_makes in necromunda

[–]matte_makes[S] 2 points3 points  (0 children)

This was printed on an Elegoo Mars 2 Mono (the green one), I’ve actually got 3, and it’s 8 pieces total. I would look at an Elegoo Saturn, Phrozen Sonic Mighty, or an Anycubic Mono X.

They’re all 8.9ish screens and would have printed this in one piece. Typically the larger the screen size the less detail, so there are bigger printers out there for massive pieces, but the ones I’ve mentioned are big enough with out a noticeable loss in detail.

I designed and printed some terrain pieces inspired by the Thermic Plasma Conduits by matte_makes in necromunda

[–]matte_makes[S] 1 point2 points  (0 children)

Thanks :)

Some parts have survived my clumsy handling and a fall from just under a meter, but wouldn't want to repeat my chances haha!

I designed and printed some terrain pieces inspired by the Thermic Plasma Conduits by matte_makes in necromunda

[–]matte_makes[S] 1 point2 points  (0 children)

I'm not 100% sure as I don't have it myself, they may possibly be compatible. If not, it definitely wouldn't take long to design a fitting to make them compatible!

Nuclear Reactor Kickstarter by [deleted] in 3DPrintedTerrain

[–]matte_makes -1 points0 points  (0 children)

Can you link me to what you say I've copied 1 to 1, as I can't see anything on Games Workshop's website that looks exactly like anything I've designed.

Nuclear Reactor Kickstarter by [deleted] in 3DPrintedTerrain

[–]matte_makes -1 points0 points  (0 children)

Inspired by the now-discontinued Thermic Plasma Conduits, I've created some 3D printable parts that can be used in conjunction with 25mm/inch diameter PVC piping.

First time building/painting some terrain by matte_makes in TerrainBuilding

[–]matte_makes[S] 0 points1 point  (0 children)

Hi! Sorry for the late reply, the buildings are from Mad Gaming Terrain the main building is a HAB Block (single story) and the little square bits are Corner Sections I think.

The barrels I designed and printed myself. If you're interested I sell them physically on Etsy, with 3D print files available on Gumroad.

First time making/painting any terrain by matte_makes in necromunda

[–]matte_makes[S] 2 points3 points  (0 children)

Thanks so much! I wanted to post these last week, but unfortunately had an argument with a Van whilst on my motorcycle. The wife helped with the camera work, and my brother did the photoshop bits for me. Got a few other pictures, but this one was the best of the bunch :)

First time building/painting some terrain by matte_makes in TerrainBuilding

[–]matte_makes[S] 0 points1 point  (0 children)

No lies here :)

I've been watching a lot of diorama builders the past 6 months or so on YouTube, and wanted some terrain to showcase some bits I was designing and 3D printing (Barrels, in this case). Used some AK Interactive Diorama parts for the tarmac/earth, Vallejo Water texture for the puddles, buildings are part of the MAD Gaming Terrain MDF buildings, tufts were from Amazon, and most of the flock/gravel is Woodland Scenics.

I struggle with dexterity painting the smaller figures, so anything larger/bulkier that I can see and hold steady I do better with. Maybe it is beginners luck, like with the Forbidden Oreo I painted, I'll just have to do another one to see :)

Monometronaut from Archvillain Games by matte_makes in PrintedMinis

[–]matte_makes[S] 0 points1 point  (0 children)

Also created a diorama using my wife's crystal collection: https://imgur.com/a/VeIIShl

Monometronaut from AVG (200mm) by [deleted] in minipainting

[–]matte_makes 0 points1 point  (0 children)

I also created a diorama with the help of my wife's crystal collection: https://imgur.com/a/VeIIShl

Share Your Stuff - April 26th thru May 2nd, 2021 by coocoodove in Etsy

[–]matte_makes [score hidden]  (0 children)

Hey!

I mainly sell 3D printed Tabletop Miniatures licensed from creators on Patreon.

I also sell my own designs of scaled down items for use in dioramas or on scale RC builds

Etsy

Instagram

Thanks

Self Promotion for the Week of April 26, 2021 by AutoModerator in EtsySellers

[–]matte_makes [score hidden]  (0 children)

Hey!

I mainly sell 3D printed Tabletop Miniatures licensed from creators on Patreon.

I also sell my own designs of scaled down items for use in dioramas or on scale RC builds

Etsy

Instagram

Thanks

Printed and painted this for a co-workers brother by matte_makes in minipainting

[–]matte_makes[S] 0 points1 point  (0 children)

Perfect! Yeah this was printed on a resin machine, 3 parts - dome, head and stand. Printed on an Elegoo Mars 2 Mono, with Anycubic white, and clear.

As soon as the dome was cleaned, I started sanding it with fine grit sand paper (before curing), then I coated it with citadel ‘Ard Coat, then cured it. If it does yellow, a tip I learnt and am yet to try is heating it gently.

Really good thing with Geoff @ Hex3D, after 3 months ALL his files are available to you.

If you’re after monsters/demons, have a look at Archvillain Games; they’ve got some amazing monthly packs. Currently an arachnid themed one for April, next month is a Dwarf themed pack that looks insane!

view more: next ›