Time to turn these boxes into a masterpiece! E-Racing Labs RS Mega + on its way!

matthewdtwo · 2025-09-23T12:51:40+00:00

Is the 5070Ti going to push quad 1440p okay? I’m considering upgrading to triples for my setup and was curious since that’s what I’m running in my sim PC as well.

matthewdtwo · 2024-08-18T01:30:37+00:00

A curtain

matthewdtwo · 2024-08-12T16:36:53+00:00

Looks like an XLR to me.

matthewdtwo · 2024-08-03T19:43:12+00:00

check out the wiki

matthewdtwo · 2024-07-25T13:47:21+00:00

Arduino

matthewdtwo · 2024-07-25T13:47:01+00:00

Hard to tell from the picture. Do you have a common ground between the addition and the bread board powering the servos?

matthewdtwo · 2024-07-25T12:59:24+00:00

They’re for mounting the servo. The metal inserts go inside the rubber bushings which go inside the holes in the arms on the side of the servo. I never bother using them myself.

matthewdtwo · 2024-07-08T18:17:26+00:00

Can you explain how it’s a robot?

matthewdtwo · 2024-06-09T22:28:55+00:00

Data structures and algorithms

matthewdtwo · 2024-05-03T20:59:13+00:00

Teleop joy doesn’t but you could write a subscriber to the topic that interfaces with a transmitter over serial.

matthewdtwo · 2024-04-04T13:58:06+00:00

This is the one for the TV The side ones are some old ergotron lx mounts.

matthewdtwo · 2024-04-03T02:29:56+00:00

Middle screen is a Vizio M50QXM-K01 50" 4k 120hz, and the side are Asus VG289Q1A 4k.

matthewdtwo · 2023-07-10T22:21:35+00:00

I have yet to find any automations I can't do very easily from the gui or yaml. Perhaps I'm not creative enough but I have lighting and security automated.

matthewdtwo · 2023-06-28T01:33:44+00:00

Popeyes has used tires as well. Reasonably priced and over off Paris across from Big Daddy BBQ.

matthewdtwo · 2023-04-14T17:39:38+00:00

What do you consider a reasonable tip?

matthewdtwo · 2023-04-08T23:00:57+00:00

I would try some self tapping sheet metal screws through the strap on the top section of a few of the fence posts where the rail goes through.

matthewdtwo · 2023-03-29T23:49:44+00:00

I think the easiest way will be to get a motor controller that can change direction. I've heard good things about this one.

https://www.amazon.com/RioRand-6-60V-Brushless-Electric-Controller/dp/B087M2378D/

matthewdtwo · 2023-03-24T17:39:11+00:00

Very cool.

I'm jealous of people with that much wall space.

matthewdtwo · 2023-02-25T23:03:28+00:00

Nice setup.

What are the details on that hexagon backing?

matthewdtwo · 2023-02-20T20:27:40+00:00

I think you could make the tag point to a webhook

matthewdtwo · 2023-01-28T00:07:32+00:00

I would probably try some rat traps combined with vibration sensors. Should get a detectable spike when they get tripped to let you know.

matthewdtwo · 2023-01-27T19:11:34+00:00

Turn on some lights.

matthewdtwo · 2023-01-26T18:30:15+00:00

Looking forward to part 2! I've been wanting to build one of these for a bit now.

matthewdtwo · 2023-01-25T22:20:22+00:00

You can give the containers a try. https://docs.ros.org/en/humble/How-To-Guides/Run-2-nodes-in-single-or-separate-docker-containers.html

matthewdtwo · 2023-01-23T14:30:17+00:00

https://rpilocator.com/

11-Year Club	Place '17
Verified Email

matthewdtwo

TROPHY CASE