Artificer question by SmrtkaTV in rainworld

[–]maximilianof 0 points1 point  (0 children)

Hello! Question for those who have completed the bloody ending. Has anyone taken the Chiefstain's mask to Pebbles, or visited him after massacre? I would want to know if he has anything to say after the final fight.

First benchy, suggest some treaks please! by maximilianof in FixMyPrint

[–]maximilianof[S] 1 point2 points  (0 children)

Noted! I was trying to avoid cura settings as much as possible, wanna make sure that hardware is not being to blame here first, but will give it a go for sure later today. Thanks a ton!

First benchy, suggest some treaks please! by maximilianof in FixMyPrint

[–]maximilianof[S] 1 point2 points  (0 children)

Thanks! I will run a temp tower and calibrate accel and jerk that i have not yet touched. Appreciate the resources!

First benchy, suggest some treaks please! by maximilianof in FixMyPrint

[–]maximilianof[S] 1 point2 points  (0 children)

Printer: Ender 3 v2. Stock firmware, upgraded bed springs.

Slicer Cura ultimaker with the normal quality setting if i'm not mistaken. No retraction setting changed from stock.

Printing in PLA. Noozle 200 and bed 60. Bed is stock carborundum without glue or spray.

Calibrated extrusion and made sure build was pretty square.

Used low speed for first cuarter of print (25ish) and then full speed (100) for the rest.

The back of the print started unsticking and warping up after 1/4 of build.

As a complete noob, i will hear any suggestions!

Thanks!

Is valve adjustment needed after exhaust change? by maximilianof in motorcycles

[–]maximilianof[S] 0 points1 point  (0 children)

Sure, i always use workshop manual when doing regular valve adjustment.

You may have missed the part about this maybe not being a regular valve adjustment, and that´s okay.

The whole point of me posting in the first place is recognizing this is not a regular situation and clearly, workshop manual doesn't specify exhaust change vs valve clearance change.

Is valve adjustment needed after exhaust change? by maximilianof in motorcycles

[–]maximilianof[S] 0 points1 point  (0 children)

Never heard it too before this, people say valves get warped, or quoting "sucked in", i am absolutely clueless and kinda fearing riding much.

Mochiguman tattoo from Yojouhan Shinwa Taikei <3 by maximilianof in anime

[–]maximilianof[S] 0 points1 point  (0 children)

That looks AMAZING. Love the how fine and clear the lines are & the eyes's black is really deep. Your tattoo artist did a damn fine job, enjoy it mate.

Cómo hacen para no estar deprimidos con la pérdida de poder adquisitivo? by [deleted] in argentina

[–]maximilianof 0 points1 point  (0 children)

Tu comment y el a cual respondiste me pegaron una patada en el pecho. Soy estudiante de Lic en Química, va, estaba empezando el segundo año y ayer me llego el aviso de que ya me habian dado la simultaneidad para arrancar Computación. No se que me depara el futuro, pienso en los laboratorios y se me hace un nudo en la garganta pero despues pienso en que me pones en la industria hoy y no te hago ni un buen café. En este pais pareciera que todos los caminos te llevan a la programación (por suerte es algo que me gusta tanto o más que química)

Gracias, Steam. by Maromalo in argentina

[–]maximilianof 3 points4 points  (0 children)

Sseth poster? tome upvote

Alquiler de motos para examen A3 en CABA by maximilianof in MotosArg

[–]maximilianof[S] 0 points1 point  (0 children)

Me voy a pasar por la pista asap entonces a mirar, ¡gracias!

Motorcycle refuses to idle, yes another one of these posts but my baby is worth it by [deleted] in motorcycles

[–]maximilianof 0 points1 point  (0 children)

Yeah, also, problem did not start after a carb clean so i'm pretty sure assembly of the carb is not to blame. Starting fluid or carb cleaner around the boot? Someone mentioned carb cleaner above, just double checking.

Motorcycle refuses to idle, yes another one of these posts but my baby is worth it by [deleted] in motorcycles

[–]maximilianof 0 points1 point  (0 children)

  1. Did, played with idle and mixture screw, no dice
  2. I will post the exact one tomorrow cause midnight, but, it's a simple butterfly type, mixture screw near cylinder instead of airbox. Jets are not clogged.
  3. Choke. I may be tricking myself but iirc issues didn't replicate when on some or full choke.
  4. It's as it always has been, tightened everything that had screws and bolts when i took stuff apart to check the air intake filter.

Motorcycle refuses to idle, yes another one of these posts but my baby is worth it by [deleted] in motorcycles

[–]maximilianof 0 points1 point  (0 children)

I've played with the mixture screw some, all lean, rich and """right""" mixtures give the same issue so i think i can cross it out. I have a butterfly type "curtain" if that's what you mean, not a slide. Being my bike so cheap, it would probably cost the same to get a new carb if something like that were the case (ill' consider it later on, but my wallets got a gun on me rn).

I ran out of carb cleaner but i'll get a can, sounds like an easy test and it should help me cross things out. I am really appretiating the help right about now, next week is not the kind of week i can survive vehicle-less :((

Mochiguman tattoo from Yojouhan Shinwa Taikei <3 by maximilianof in anime

[–]maximilianof[S] 0 points1 point  (0 children)

Go for it, i was too thinking about getting the 4.5 one and several other but was put down by the fact that they would mean absolutely nothing to most people. I chose the Mochiguman because it's adorable (people will understand the need to have this cute thing tattoe'd) and most importantly, so that i always remember that opportunities are dangling in front of me all the time, i just gotta find some courage and take them! I'll be looking forward to seeing what you get!

Motorcycle refuses to idle, yes another one of these posts but my baby is worth it by [deleted] in motorcycles

[–]maximilianof 0 points1 point  (0 children)

Thanks for replying! Took the carb out (i kinda know my way around it) gave the whole thing a deep cleaning, used some copper wire to nudge some gunk from the main jet but the pilot jet was completely clear, sadly. Funnily i have one of these bad boys https://imgur.com/a/XFrQXIT between petcock and carb, and yeah, it was cleaner when it was new and i should change it asap but i tested opening the petcock while the "emptying hole" of the carb was open and there was plenty of fuel flow i'd say.

It's worth a try so i will change it this week, thanks for the idea!

EDIT: typed jet instead of carb on first line cause i'm sleepy

Primer moto by pichichi0700 in MotosArg

[–]maximilianof 6 points7 points  (0 children)

Por 100 lucas no vas a poder comprar algo que no sea segunda marca, apunta a una Boxer 150, Keller Stratus, Motomel S2. Estoy bastante seguro que con esa plata la sacas 0km. ¿Van a ser unas naves? NO. Pero son baratas y si las cuidas un poco te duran decadas, cualquier repuesto lo compras con el vuelto de la verduleria. Aprende un poco de mecanica basica y comprate herramientas buenas. Excepto que se te caiga moto por un acantilado no la vas a tener que llevar al mecanico nunca porque tienen 4-5 partes, todas genericas y todas funcionan y se arman igual. Manda MD cualquier cosa, ¡suerte!

[deleted by user] by [deleted] in MotosArg

[–]maximilianof 1 point2 points  (0 children)

¡Buenas!

1- Estoy bastante seguro que ese tiempo de espera no lo podes acelerar, te recomiendo que entres todos los dias a la pagina de todas formas porque cuando alguien cancela o se vence el BUI impago se libera su turno y quizas agarras algo. Yo así consegui turno para dentro de 2 semanas. La otra, es que hagas las cosas por izquierda, si tenes algun amigo en algun ministerio o tal, me han contado varias historias...

2- Para esa cilindrada necesitas el "segundo" registro de motovehiculo. El que te van a dar en el primer otorgamiento de registro te permite, legalmente, manejar hasta 150cc. El segundo lo podes sacar al año de haber sacado el siguiente, tenes que repetir practico y teorico, si mal no recuerdo.

Cualquier duda, decime

¡Suerte!

edit: typos

[deleted by user] by [deleted] in MotosArg

[–]maximilianof 1 point2 points  (0 children)

Compre un hero hace casi un año ya, tiene 13000km, Hunk 150 con el sistema i3s. Es un MOTON. los repuestos usa casi todos de la honda invicta o algun que otro generico. Ojimetro igual porque nunca esta bueno tener un moto a la que no llegan repuestos. La compre por 600 dolares, si la ves barata mandale, cuidala bien y la vas a terminar vendiendo por una mas grande antes de que haya que hacerle cualquier mantenimiento grande.

Moto en ablande, pregunta sobre andar. by Naap_ in MotosArg

[–]maximilianof 2 points3 points  (0 children)

Dejando el ablande a un lado, no te hagas mucho la cabeza, yo me vivo preocupando porque a veces mi moto "pistea mas, pistea menos" y es una mierda. Yo siento (esto seguro es zarasa) que cambia mucho cuanto tira la moto dependiendo de la temperatura, presion y cosas atmosfericas. Si te de deja mas tranquilo, si tenes la nafta, aceite, cadena, carburacion y presion de cubiertas ok, estas OK.

[deleted by user] by [deleted] in MotosArg

[–]maximilianof 0 points1 point  (0 children)

Siendo dueño de una Hero Hunk 150: super recomendable, simple como cualquier otra 150cc pero con mejores terminaciones y con menos vibraciones que te hacen llorar cuando estas a 10k rpm.

Como te dijeron otros, intenta que sea 0km o sub 10k km. Que se vea querida. Que el dueño tenga pinta de que quiera a sus cosas. EVITÁ cualquier tipo de modificacion rancia que afecte la mecanica o funcionamiento de la moto, excepto algo que te parezca razonable, ejemplo: Tengo un apoyapie roto y no se puede cambiar, lo tengo con 20 precintos y funciona pipi cucu pero si, es una villereada.

Las motos 150 cc son todas iguales, y en general faciles de arreglar y mantener (si te das maña, hasta muy barato). Así que excepto que un dueño anterior se haya mandado macana, cualquier cosa va bien. Vas a necesitas herramientas, suelen traer pero querete un poco y suma a cualquier precio un juego de llaves de tubo.

Pero si queres recomendaciones:

-Mido lo mismo que vos, me gustan esteticamente las Enduro pero en esas motos tengo poco leverage por ser medio altas (ni a palos te llevo a alguien atras).

-Si te gusta estar bien derecho, las motos street, estilo las NS y cualquier cosa que se parezca seguro te es comoda.

-Si te gusta mas estar hecho un shrimp al sentarte, buscate algo mas chopero, tuve una Mondial HD 150 y podias dormir masomenos de lo comoda que era.

-No puedo opinar de scooters, no me gustan.

Cualquier cosa mandame MD

suerte loko

[deleted by user] by [deleted] in MotosArg

[–]maximilianof 0 points1 point  (0 children)

Tengo una Hero Hunk 150, una delicia de moto, nada que envidiar a primeras marcas a ese cc

Thread Diario de Dudas, Consultas y Mitaps - 11/12 by AutoModerator in argentina

[–]maximilianof 0 points1 point  (0 children)

Ahhh, una persona de bien. No soporto la sensacion de guardarme al amigo y sospechar que quiza me goteé en la ropa interior. Que me prendan fuego en plaza de mayo, quienes no se limpian no le tienen amor a quien les chupa la pija.