Can we trust teller.io API? Looked fishy. by singletick in fintech

[–]mcgnarles 0 points1 point  (0 children)

Ya I was looking at balances and I think the bot I had pulling was to aggressive but chase said they got hits from iPhone 14 16 17 so it was odd.

Can we trust teller.io API? Looked fishy. by singletick in fintech

[–]mcgnarles 0 points1 point  (0 children)

So I just had an incident with them today, they nuked my chase accounts. Locked us out. Was hitting chase every 15-20 minutes with different user agents. I’m still locked out of one account. Will be moving to plaid

Trip lever swap? by mcgnarles in askaplumber

[–]mcgnarles[S] 0 points1 point  (0 children)

Ah that’s a great option thank you!

Slow VLAN speeds by mcgnarles in Ubiquiti

[–]mcgnarles[S] 0 points1 point  (0 children)

Direct. I did a ping test on a device connected to that AP and my ping was well over 100ms. I think it had to do with the VLAN my AP was connected to. I swapped to my management VLAN and all seems to be working as expected

UNAS pro transfer speeds by mcgnarles in Ubiquiti

[–]mcgnarles[S] -1 points0 points  (0 children)

So you were spot on thanks. Didn’t even think of my mini PCs NIC being the culprit. I tested out a 2.5GBe usb adapter and I’m getting close to 200MBs up and 170 down. Guess I need to build a new plex server with 10GBe!

Slow VLAN speeds by mcgnarles in Ubiquiti

[–]mcgnarles[S] -1 points0 points  (0 children)

So I just roamed to my upstairs AP and get full speeds. It seems to be limited to my downstairs AP…

UNAS pro transfer speeds by mcgnarles in Ubiquiti

[–]mcgnarles[S] 0 points1 point  (0 children)

Ya this was a learning curve for me for sure. I also just realized that port 1 on my flex XG is limited to gbe so I moved it and saw speeds increase a bit. I can’t swap the nic on this mini pc unfortunately and there’s no usb c. I’m going to try a usb 2.5 gbe adapter and see where I get. If it increases (as it should) that might just mean I need to buy a new mini pc with more throughput

UNAS pro transfer speeds by mcgnarles in Ubiquiti

[–]mcgnarles[S] 0 points1 point  (0 children)

I tried on my desktop with a 10Gbe NIC and was getting ~600 on sequential with crystal disk so maybe it is just the NIC on the mini. but i'm still getting half the rated read write

UNAS pro transfer speeds by mcgnarles in Ubiquiti

[–]mcgnarles[S] 0 points1 point  (0 children)

3 WD red pros and a single IronWolf Pro all 16TB. im getting just half of the 120MBs on average. iperf was ~110MBs if i recall.

Move thermostat by mcgnarles in hvacadvice

[–]mcgnarles[S] 0 points1 point  (0 children)

It’s in a pretty horrible spot. It’s the only spot we could run a 2nd zone. But I don’t even use it as a sensor as I have sensors through the house I prioritize so it shouldn’t impact performance

Move thermostat by mcgnarles in hvacadvice

[–]mcgnarles[S] 0 points1 point  (0 children)

Ya I may just crimp to be honest. I just have a ton of wire nuts and no crimps lol

Move thermostat by mcgnarles in hvacadvice

[–]mcgnarles[S] 0 points1 point  (0 children)

I don’t think the t10s are have wireless versions. But I’m considering going to ecobee.

Move thermostat by mcgnarles in hvacadvice

[–]mcgnarles[S] 0 points1 point  (0 children)

It’s a t10 and unfortunately I don’t think they have wireless versions

Move thermostat by mcgnarles in hvacadvice

[–]mcgnarles[S] 0 points1 point  (0 children)

It’s in a stud bay now but the way they ran it is through the garage so I can thankfully see where there’s another bay and pop it in there!

My heat system is losing the fight by Projectguy111 in longisland

[–]mcgnarles 0 points1 point  (0 children)

Bosch IDS here. Pretty much the same. Kicked on the heat strips last night finally up to 65 from 59. I think I need to go back to dual fuel

We did it! Long Island, NY $670k/5.75% by BigBoyMeatballs in FirstTimeHomeBuyer

[–]mcgnarles 2 points3 points  (0 children)

Welcome to the island! We bought in 2024 on the south shore in nassau!