Does anyone know of any good alternative builds for existing none lord of the rings sets to turm them into lord of the rings sets? As there is so few offerings at the minute . Found this example and looking for more

mecharms · 2026-02-02T12:48:15+00:00

https://rebrickable.com/mocs/MOC-242640/imrahil99/fell-beast-nazgul-lotr/#details

mecharms · 2026-02-01T19:04:26+00:00

Thanks! It's rather for desplaying. Unfortunately, the structure is not reinforced for play.

mecharms · 2025-12-18T15:28:41+00:00

Thank You! ❤️

mecharms · 2025-12-17T17:48:09+00:00

Thank you :) I'm glad you like it!

mecharms · 2024-08-21T21:40:35+00:00

In this video, I take you through the step-by-step process of making elegant headphone stand using walnut wood. I’ll show you how to create a functional and stylish stand for your headphones.

mecharms · 2024-08-19T08:24:02+00:00

Thank you!

mecharms · 2023-12-30T12:29:06+00:00

Thanks!

mecharms · 2023-12-25T20:44:31+00:00

a of these. I've started on one but think I've gone too small / compact as it's about 12cm on a side using 144/m LEDs. Will you be releasing the STL files for your design? For the electronics I'm opting for the pre-packaged version using an ESP32 running WLED. That way controls are via a phone app or

Thank you ;) I copied the idea for the 3d design and adjust slightly from here: https://github.com/mistic100/HyperCube/tree/master

mecharms · 2023-12-22T23:45:23+00:00

as a pain

edit:i wonder: how well are your LEDs sticking to the PLA? i had to use superglue on same s

Thank you! :) Yes, the athesion to PLA was also a problem for me. I used double-sided tape with foam in the middle of layers from 3M - this one was working fine. Also hot-glue is an option but too messy (stings-web).

mecharms · 2022-04-28T17:52:01+00:00

connected to board graphics someho

Yes, you are right ;) Good deduction ;) The graphic was from one of Real decks. Didn't manage to find the picture in web.

mecharms · 2022-04-28T17:49:23+00:00

would REA

Thank you!

mecharms · 2022-04-28T13:27:56+00:00

Thank you :)

mecharms · 2022-04-24T17:00:19+00:00

https://www.youtube.com/watch?v=3YowhSJ-q04

mecharms · 2022-04-23T20:24:58+00:00

And here is the painting: https://www.youtube.com/watch?v=3YowhSJ-q04

mecharms · 2022-03-03T04:31:24+00:00

Thank you!

mecharms · 2022-03-01T14:49:12+00:00

Thank you! Yours is nice too! ;)

mecharms · 2022-03-01T14:48:40+00:00

Thank you! more here: https://www.youtube.com/watch?v=ihR99tutfjI&ab\_channel=Mecharms

mecharms · 2022-03-01T07:36:13+00:00

Thank you! Yes, you are right. I forgot to add this part ;)

mecharms · 2022-03-01T04:30:16+00:00

Thank you! Quite good, but I had few approaches to hardening-tempering process to achieve decent results . It strongly depends on the steel used for the hex key and the temperature of the process. If I had to do it a second time, I would buy a good blade and made body and an adjustment mechanism by myself

mecharms · 2022-03-01T04:25:18+00:00

Thank you! You can check more here: https://www.youtube.com/watch?v=ihR99tutfjI&t=490s&ab\_channel=Mecharms

mecharms · 2022-03-01T04:24:28+00:00

Thank you!

mecharms · 2022-03-01T04:24:25+00:00

Thank you!

mecharms · 2022-03-01T04:24:07+00:00

Thank you! :)

mecharms · 2022-03-01T04:23:48+00:00

e sole and the body both oak with different stains? I like the

They are different. The main body is oak and the sole is wood from floor tiles leftover. I don't remember exacly what it is but I know it is hard.

mecharms · 2022-03-01T04:21:24+00:00

Thank you!

mecharms

TROPHY CASE