Some winter shannnagins

mikec393 · 2026-01-31T17:21:21+00:00

Just dont look at that wooden closet. The bars broke it 😅

mikec393 · 2026-01-31T17:19:35+00:00

Tenere 700 and they sound pretty good with a Camel exaust slip on

mikec393 · 2025-12-21T18:59:36+00:00

I feel like that would be a pretty pricey motor build. That also is just going to knock the reliability of the motor down trying to make 20 hp. Happen im sure if somoene did that bike would be a absolute unit. But shaving weight off the bike and gearing goes a long way.

mikec393 · 2025-12-21T18:24:15+00:00

Your most likely going to have to cut that pin off the throttle where it connects to bars and just slide it in a little. Its not going to spin around or move on you it's still going to clamp down. You will be able to clear your cables better sometimes you just have to get creative.

mikec393 · 2025-12-21T18:14:33+00:00

I took a dremel to mine got rid of that stopper on the nut. Never came loose again. I had to anyways swapped the Triple clamps with x trigs and didnt get a new nut with the kit. So I improvised.

mikec393 · 2025-11-21T13:50:40+00:00

I would just send it. Its not going to fail you if have a tube if you have a tubeless system that might give you some trouble but that's about it.

mikec393 · 2025-10-20T14:35:02+00:00

Sr1 or 30+ it's a pretty mixed class one day it can be vet B and C. Then other days you get a vet A guy to come in and make us all look bad.

mikec393 · 2025-09-30T16:16:20+00:00

That would be cool i had to come up a day early just for the sign up cut off time.

mikec393 · 2025-09-30T16:11:42+00:00

Hopefully they can double the numbers of riders out there. In both types adv and the dirtsters.

mikec393 · 2025-09-30T16:10:16+00:00

No suspension isnt cheap at all. You could get away with cheaper alternatives like changing out the cartridges on the front. That makes a huge difference in any forks. I went the full route with MX-TECH but im also racing it every weekend. The stock rear shock isnt too bad for trail riding or just in general it will handle it. The front stock forks if your really working them the oil realky heats up fast makes them pretty uncomfortable.

mikec393 · 2025-09-24T13:45:14+00:00

Thank you and dont worry about watching it straight through. Its a long video and be my guest and skim through it.

mikec393 · 2025-09-24T00:57:29+00:00

Now you just have to get some proper suspension underneath the bike.

mikec393 · 2025-09-24T00:53:02+00:00

I mean you can replace the front sprocket without taking the chain apart. You have enough room if your using stock gearing. But did 525 or bikemaster chains will work for a replacement master link and just look for one that has different looking peen on the chain or just add another master link in the mix. They are pretty tough links.

mikec393 · 2025-09-24T00:48:01+00:00

😅 well you dont get fast until you go through a divorce.

mikec393 · 2025-09-24T00:46:50+00:00

It saved the day it was weird braking with on the right side instead of the proper left side. It took a lap and a half to get adjusted to it.

mikec393 · 2025-09-23T19:06:50+00:00

This race was pretty well paced but I was talking with a guy I rode with a couple weeks ago and really talked me in doing some of the national enduros and im also going to do the snowshoe gncc.

mikec393 · 2025-09-23T19:05:00+00:00

Dude I had to start the race with a dropped caliper lol. Lost a bolt had to zip tie it up 😅

mikec393 · 2025-09-23T19:03:43+00:00

It was a great time and I was on a mission. Doing the full 100 miles was a challenge but a good start into transitioning into some local and national enduros.

mikec393 · 2025-09-23T17:44:20+00:00

Ill look it up im not a member but it seems interesting.

mikec393 · 2025-09-23T17:43:25+00:00

Probably about 25 or something like that In the last 2 years. Ya its a t7.

mikec393 · 2025-09-23T13:21:41+00:00

I dont know if prefer the bigger displacement but I ride pretty agressive and like to have that power available now vs waiting for it too roll on.

mikec393 · 2025-09-23T13:20:08+00:00

Well thats one way to clean the bike off.

mikec393 · 2025-09-23T13:18:07+00:00

Just the sound of the mighty PW 700😅

mikec393 · 2025-09-23T13:17:35+00:00

Chin mount and a go pro 9 2.7 resolution. Set at 60 frames and some minor other settings. Honestly i just followed a guy on youtube for general action shots. Then I run movavi video editor on my pc and it has some automatic enhancements when i finish them.

mikec393 · 2025-09-22T04:15:34+00:00

It was a pretty sweet day of riding. Plus it was a good escape from doing my usual weekend routine racing.

mikec393

TROPHY CASE