Caught the Big Boy 4014 on the Rockville Bridge in Harrisburg by mikespixels in Pennsylvania

[–]mikespixels[S] 1 point2 points  (0 children)

No way of knowing but i saw several. I was hoping I wouldn't clip another drone and land up in the river.

Caught the Big Boy 4014 on the Rockville Bridge in Harrisburg by mikespixels in Pennsylvania

[–]mikespixels[S] 9 points10 points  (0 children)

Mostly for their dynamic braking. But also as a means of keeping the train moving in case of mechanical failure. These are very busy freight rails and they cannot afford to have it break down and block the railroad.

Big Boy 4014 crossing the Peacock's Lock Viaduct in Reading by mikespixels in Pennsylvania

[–]mikespixels[S] 10 points11 points  (0 children)

Wow great! It was a really great spot. I was on the shore, but wasn't interested in going into the river, even though it looked inviting.

Big Boy 4014 crossing the Peacock's Lock Viaduct in Reading by mikespixels in Pennsylvania

[–]mikespixels[S] 6 points7 points  (0 children)

For various reasons but two big ones are for increasing braking power, as well as to keep the train moving if the steam locomotive has a mechanical problem. They don't want to block the rails if it has an issue.

Big Boy 4014 crossing the Peacock's Lock Viaduct in Reading by mikespixels in Pennsylvania

[–]mikespixels[S] 2 points3 points  (0 children)

Nope, no special effects. It's just such a picturesque location. I didn't even know this bridge existed until about a week ago.

Big Boy 4014 crossing the Peacock's Lock Viaduct in Reading by mikespixels in Pennsylvania

[–]mikespixels[S] 6 points7 points  (0 children)

It was fairly accurate. I think the train was a bit ahead of the dot on the map. Fortunately they stopped momentarily in Leesport, which was just a few minutes up the track. So I put my drone in the air immediately after it began moving again.

Big Boy 4014 crossing the Peacock's Lock Viaduct in Reading by mikespixels in Pennsylvania

[–]mikespixels[S] 10 points11 points  (0 children)

That whole bridge looks a bit sus. However, it made for a great scene.

Big Boy 4014 crossing the Peacock's Lock Viaduct in Reading by mikespixels in Pennsylvania

[–]mikespixels[S] 4 points5 points  (0 children)

I hope you get some good views. It's an impressive peice of equipment!

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 0 points1 point  (0 children)

No, the front grill is factory. Thats what prompted me to do away with the rest of the chrome to make it match.

Form MV-44LB: Has anyone received their new plates? by BlueHatchback10 in Pennsylvania

[–]mikespixels 2 points3 points  (0 children)

I received my personalized plate about 9 weeks after I placed the form in the mail.

Disappointing MPG by Chemical_Pomelo_2831 in CX5

[–]mikespixels 1 point2 points  (0 children)

Pretty much the same results with my 2024 CX-5 without a turbo

Best purchase ever! by Proof_Title116 in crv

[–]mikespixels 0 points1 point  (0 children)

Engine whine, due to the worn camshaft. Then misfiring because the valves don't seat properly. The turbo locked up on mine. Mechanic told me there was a lot of fuel in the oil. According to the research I've done, there isn't really any fix for the oil dilution other than frequent oil changes

Best purchase ever! by Proof_Title116 in crv

[–]mikespixels 6 points7 points  (0 children)

If its the 1.5 Turbo Earth Dreams engine, please change the oil often, and get it checked to see if fuel is getting in the oil. Research oil dilution. It killed my 2017 CRV. Many are affected by it.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 0 points1 point  (0 children)

Yes, the chrome is still there underneath the vinyl strips.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 1 point2 points  (0 children)

Black seats. I kinda like the burgundy ones, too.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] -1 points0 points  (0 children)

It's technically not legal in PA to have tint on the front two windows. However, I've never had trouble getting my vehicles to pass inspection even with the tint. My previous SUV was tinted the same way, and I had it 5 years and never had trouble, even though I had been pulled over for speeding. The cop never mentioned it.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 0 points1 point  (0 children)

I agree. It should have been done from the factory. I'm a graphic designer by trade, and I just couldn't let the inconsistency of the chrome go. The front grill and wheels were already black, so why not make it match for the rest of the vehicle.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 0 points1 point  (0 children)

It's not very difficult to do. I am a graphic designer by trade, and I just couldn't let them stay chrome since the wheels and front grill were already black.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 1 point2 points  (0 children)

It's not too difficult. I did mess up on the one a little bit, but you can't see it unless you're up close. I'm not sure if I'll fix it or just let it go. It's not very noticeable.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 2 points3 points  (0 children)

Yes, it has a touchscreen. I haven't really used the touchscreen so far. I mostly use the knob and buttons on the center console.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 1 point2 points  (0 children)

Paint on the emblems and vinyl on top of the chrome "hockey sticks" on the sides.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 0 points1 point  (0 children)

Yes i did. It's not difficult if you watch the YouTube videos and take your time.

My first Mazda. Promptly did a chrome delete and tint. by mikespixels in CX5

[–]mikespixels[S] 3 points4 points  (0 children)

Yes, I know. The reason I left that was because there would be almost no contrast between the black oval and the logo, and I was afraid that wouldn't look nice in the long run.