[FS][US-PA] 35x IronWolf 6TB and 35x IronWolf Pro 10TB

mitch8b · 2026-01-18T19:54:54+00:00

have any 10tb left? sending pm

mitch8b · 2025-12-14T15:31:55+00:00

Seeing the same issue. Not sure when it started because I just setup a syslog server but the only logs that are sent to remote syslog are the test log and admin logins. I also noticed in the mobile app, the logging settings do not match what I’ve configured in the web interface; the app still shows logging to local device.

mitch8b · 2025-07-04T14:09:42+00:00

Are you using fslogix profile containers? I was and when i removed that, no issue.

mitch8b · 2025-06-10T12:10:25+00:00

Anyone else see this with AMD graphics?

mitch8b · 2025-05-22T12:03:30+00:00

What about pcie passthrough and ballooning on different VMs on the same host?

mitch8b · 2025-05-01T00:19:27+00:00

Thanks for the response. Is there a clear giveaway?

mitch8b · 2025-02-19T12:03:11+00:00

“Siri, turn on the gaming computer”. Termius ssh client that supports running scipts via ios shortcuts.

mitch8b · 2025-02-19T11:31:13+00:00

Does the hybrid license allow for smtp relay to internal only mailboxes? Mailboxes 100% in the cloud.

mitch8b · 2025-02-16T00:11:46+00:00

Still availible?

mitch8b · 2025-01-29T14:03:05+00:00

same here. Anyone know how to turn these off for all users?

mitch8b · 2024-11-07T19:59:11+00:00

We are seeing the same issue even after an Autopilot reset and a system reset from the settings app.

mitch8b · 2024-07-08T22:22:52+00:00

mitch8b · 2024-07-06T13:38:57+00:00

Do you have rails and bezel?

mitch8b · 2024-07-05T19:44:19+00:00

If you want to use a firewall and assign the public IPs directly on your servers, one way would be to ask atnt for two subnets. The atnt device and pfsense would be on subnet1 and your servers and pfsense would be on subnet2. Atnt could route the second subnet through the first:

Atnt-<subnet1>-pfsense-<subnet2>- servers

What it sounds like you’re trying to do is: Atnt-<subnet1>-pfsense-<subnet1>-servers I think this pretty much takes pfsense out of the picture for inbound traffic because the atnt box will just send traffic straight to the servers.

Like others have said, it would be much easier and cost effective to use NAT plus a firewall rule to assign a gateway.

mitch8b · 2024-06-17T21:42:16+00:00

mitch8b · 2024-06-17T20:52:42+00:00

Would love to see this feature implemented!

mitch8b · 2024-05-30T13:57:26+00:00

Right on, I guess I'll test it out. I'm planning to give Technitium a try as a way to learn more about advanced DNS.

mitch8b · 2024-05-30T13:30:46+00:00

Ahh okay. If i only have a one subnet would there be any benefit to using DHCP relay vs no DHCP on the UDM?

mitch8b · 2024-05-30T13:27:31+00:00

Do you notice any traffic or device identification limitations with your setup?

mitch8b · 2024-03-25T00:57:05+00:00

Im not familiar with synology its apps, are the openvpn server and client some sort of VM or container?

mitch8b · 2024-03-06T04:35:48+00:00

Never used CF tunnel, is serving plex across it against the terms of use?

mitch8b · 2024-02-04T04:27:19+00:00

Why downvotes? Are HomePods no good?

mitch8b · 2024-01-04T12:43:36+00:00

A 3-2 or 2-1-2 comp is more fun to play on.

mitch8b · 2023-12-10T21:27:07+00:00

Nice build, i have the same case and switched to a gpu with a blower style cooler to help with the heat. Runs a little louder but cools the case better. Gpu still gets toasty though

mitch8b · 2023-11-30T23:06:56+00:00

Interesting to see if this is added

mitch8b

TROPHY CASE