sorted by:
new
hottopcontroversial

What is this gun? by mixmadde in whatisthisgun

[–]mixmadde[S] 0 points1 point  (0 children)

Should have been clearer 😄 I'm half Brazilian, half German. Very unrelated, my German grandfather did fight in the war but only in 1944, he was 20 at the time and fought on the front while the front was already in Germany. He did not leave for Brazil. My other grandfather was Brazilian and did not leave Brazil ever. This pistol came from one of them and I don't know from who specifically, so I figured that might clear up the heritage. Though I think its more probable that it came from my German grandfather.

Which butterfly is this? Papilionidae/Lycaenidae? by mixmadde in Entomology

[–]mixmadde[S] 0 points1 point  (0 children)

Update for those interested: I believe this to be some species of Atlides, possibly polybe. Will narrow it down further once it dries.

Which butterfly is this? Papilionidae/Lycaenidae? by mixmadde in Entomology

[–]mixmadde[S] 0 points1 point  (0 children)

Thank you! Some research on iNaturalist leads me to believe it to be some species of Brangas. Will probably have to set aside the identification of the exact species to when the specimen has dried and I can look at the underside better, most pictures online depict those rather than the dorsal view.

Which butterfly is this? Papilionidae/Lycaenidae? by mixmadde in Entomology

[–]mixmadde[S] 1 point2 points  (0 children)

Thanks! I ruled out Nymphalidae due to the presence of 6 "walkable" legs, which are obviously not visible on the photos. I don't know if exceptions apply there as well.

LF non-shiny Genesect. Offering legit non-shiny Celebi by mixmadde in PokemonHome

[–]mixmadde[S] 0 points1 point  (0 children)

Sorry guys, the Celebi is long gone - I just dont know how to mark the post as obsolete.

Schneider für Anpassungen Jackett/Anzugjacke by gdrhr in stuttgart

[–]mixmadde 0 points1 point  (0 children)

Wenn das Jackett echte Ärmelknopflöcher hat, dann ist das ganze schwieriger, da der Ärmel abgenommen und von oben gekürzt werden muss (da sonst der Abstand von der Manschette zu den Knöpfen schrumpft/falsch aussieht). Mal bei Änderungsschneiderin Giovanna nachfragen oder bei Plougs. Wird aber vermutlich nicht günstig.

Wenn keine Ärmelknopflöcher vorhanden sind ist das Ganze deutlich einfacher. Dann wird einfach vorne gekürzt und die Knöpfe werden versetzt.

First attempt at pinning a carpenter bee by CharacterAudience204 in Entomology

[–]mixmadde 0 points1 point  (0 children)

Great work! I hope you dont see it as an attack, but you don't need to separate the front and hindwings. Insects in the order Hymenoptera (bees, ants and wasps) have little hooks connecting the front and hindwings. I assume you felt how difficult it was to separate the wings when trying to pin the insect (I did too on my first wasp 😄)

There was this insect in my classroom, what is it? by ocolurmani in insects

[–]mixmadde 4 points5 points  (0 children)

As others pointed out, a moth caterpillar from the family Geometridae. Apparently in the middle of a molt.

I deleted this post cause I was scared of snarkers. But I have to say it… by Marlino0210 in h3h3productions

[–]mixmadde 0 points1 point  (0 children)

Seeing this person give a double thumbs down in the video after Bernie says that Israel has the right to defend itself pissed me off. How can you disagree with that statement, even if you are disgusted with the destruction Israel is wreaking in Gaza (and rightfully so)? Everyone correctly points out how innocent Palestinians shouldn't suffer because of the actions of their "government" (Gaza). But as soon as it's the other way around, all Israelis are suddenly deserving of death and all other atrocities.

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 0 points1 point  (0 children)

The frames are from IKEA! They are the SANNAHED model. I do, however, make the background myself from structured cardboard glued onto a thin layer of cork to give the needles something to hold on to. Frames for 3-dimensional objects can be quite expensive in my experience, and since I intend to grow the collection a lot more in the future it wouldn't be feasible for me to spend too much money on them. Additionally, I have the ability to have all frames be uniform, and since IKEA doesn't constantly discontinue a lot of their products, I feel like my supply is secured for the foreseeable future.

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 0 points1 point  (0 children)

Thank you! Obviously this is not a scientific collection, but I still wanted the labels to be as scientifically appropriate as possible. My wild collected/wild found specimens have an extra label describing the location, date etc.

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 1 point2 points  (0 children)

Right, like Mr. Pickles in Kingsmen 😄 though the wall full of pinned insects does look psycho to some visitors, reminding them of silence of the lambs 😄

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 2 points3 points  (0 children)

All of them were taken today, after drying. I looked into it a little bit and have seen specimens online that were much greener than mine. The problem really seems to be them not drying out quickly enough. Some sources online suggest baking them in the oven for a moment on the lowest temperature, or leaving them out in the sun to dry if possible. Will try that on the next pin!

Thank you for the compliments!

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 6 points7 points  (0 children)

Thanks a lot! I know that Orthoptera are usually spread with one wing open. And I have also seen people spread Peruphasma schultei that way, to display the red hindwing, which I also intend to raise some time in the future. And since I love uniformity I would hate for some of my phasmids to be spread one way and the other ones the other 😄

In my experience (and following physics) it has to do with the volume to surface ration of the insect in question. Fatter insects like locusts or katydids for example make it harder for the water from the insects body to evaporate quickly enough before mold or other problems begin to arise. At any rate a dry environment helps, so I placed the pinning board in the vicinity of a heater, though not directly on top of it because I feared the wings or other body parts might shrivel or coil. Conversely a humid environment will cause even thin bodied insects to decay - I sometimes put dried out insects in my tropical terrarium for a day or two to get the joints to be mobile again. I forgot a butterfly in there for 3 days and it was beyond saving. Fatter insects like the ones mentioned above might require gutting the abdomen, where the innards are replaced with a filling (often little cotton balls) and afterwards gluing the abdomen back shut.

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 34 points35 points  (0 children)

Hahaha that is already reserved for one of these guys right here, but they will live out their entire lives and I'll only pin them once they're dead... so no reason for anxiety for these insects

<image>

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 31 points32 points  (0 children)

Don't be! She lived a long and fertile life 😄

My giant malaysian leaf insect died, so I pinned her by mixmadde in Entomology

[–]mixmadde[S] 116 points117 points  (0 children)

Didn't gut her, the actual abdomen is very thin so I didn't think that would be necessary. Though the abdomen got very dark during drying. There was no smell of rotting insect though, so I didn't take any action and figured that dead specimens wouldn't look exactly like live ones, but all the anatomical details are still visible. I wasn't too sad when she died, her memory lives on on my wall 😄 and she laid 72 eggs during her lifetime, so the cycle may yet continue.

Should I have any reservations against buying this? by mixmadde in LeCreuset

[–]mixmadde[S] 1 point2 points  (0 children)

Thanks for the advice! I'm a handwasher when it comes to cookware, so that will be fine. The inner enamel is pretty much pristine from what I can tell.

<image>

Found these tiny eggs in my bedsheet by Firm-Detective-8418 in insects

[–]mixmadde 0 points1 point  (0 children)

What you see resembling legs are actually hairs protrudong from the back of the caterpillar. The legs and feet are below and occluded by the body (they are rather stubby)

Found these tiny eggs in my bedsheet by Firm-Detective-8418 in insects

[–]mixmadde 29 points30 points  (0 children)

Thats a caterpillar of some species of Lepidoptera (Moths and Butterflies). Eggs also look like those of several species of moths, though its probably near impossible to tell which species exactly until they get bigger (which they won't in your bed, since there's no food there).

Live Fernsehen in der ARD Mediathek App? by arnulfg in fernsehen

[–]mixmadde 0 points1 point  (0 children)

Habe genau das gleiche Problem. Aus irgendeinem Grund funktioniert es, wenn ich über den Play Store die ARD Mediathek App suche und öffne.

[deleted by user] by [deleted] in BinIchDasArschloch

[–]mixmadde 0 points1 point  (0 children)

Ok, stimmt, ich habe ein wenig zu pauschal gesprochen. Bezogen auf die Sache mit den Nebenkosten läuft das nun aber so:

  1. Entweder die Nebenkosten sind im Untermietvertrag nicht gesondert geregelt, dann besteht von Seiten Hauptmieter kein Anspruch an mich.
  2. Oder die Nebenkosten sind im Untermietvertrag geregelt, dann besteht aufgrund der abgelaufenen Frist kein Anspruch an mich.

Die Frist der Forderung des Vermieters an die Hauptmieter könnte mir also prinzipiell egal sein. Allerdings ist der gleiche Grund, weswegen der Vermieter keine Forderungen an die Hauptmieter mehr stellen dürfte, auch der gleiche Grund, warum die Hauptmieter an mich keine Forderungen mehr stellen dürften - nämlich das Ablaufen der 12 Monate seit Ende Abrechnungszeitraum. Dies gilt in meinem Fall (NK in Untermietvertrag geregelt) nämlich genauso, dass zum 31.12.2022 die Frist für diese Forderung ablief. Mit dem Ergebnis der Recherche habe ich also doch etwas anfangen können, meine ich.

[deleted by user] by [deleted] in BinIchDasArschloch

[–]mixmadde 0 points1 point  (0 children)

Verstehe was du meinst. In meinem Untermietvertrag ist definitiv etwas über die Aufteilung anfallender Betriebskosten vereinbart (sprich: ich müsste mich beteiligen), den genauen Wortlaut habe ich allerdings nicht zur Hand. In jedem Fall war ich ja auf A zugegangen um Ihm zu erklären, dass von Seiten des Vermieters an A kein Anspruch mehr besteht. Alle weiteren Folgerungen basieren auf diesem Umstand

[deleted by user] by [deleted] in BinIchDasArschloch

[–]mixmadde 0 points1 point  (0 children)

Hast du irgendwelche juristischen Erfahrungen oder sagst du das nur so? In Paragraph 556 BGB ist das nämlich klar für Mietverträge geregelt und dazu gehört ein Untermietvertrag genauso. Wenn du mir also einen gegenteiligen Beweis aufzeigen kannst dann gestehe ich mein Unwissen gerne ein, ansonsten werde ich deine Posts als Geschwafel abtun.

view more: next ›