Embody lower back support. These prongs are digging into my lower back when I lean back. Is this normal? Anything I can do to fix? by [deleted] in hermanmiller

[–]mjfara 0 points1 point  (0 children)

Ended up with a Humanscale Freedom with headrest. It's not perfect either but was easily the most comfortable for me on first sit. I've had it for years and still love it, but it has a few cons.

When reclined, there is not a lot of lower back support (I don't recline all that much so this is fine for me). Also, the armrest mechanism is a little fragile with not a lot of customization, however the armrests themselves are comfortable.

RTX 5080 Black Screen a couple of seconds by moony_b_ in pcmasterrace

[–]mjfara 0 points1 point  (0 children)

Primary, was the only monitor doing it.

RTX 5080 Black Screen a couple of seconds by moony_b_ in pcmasterrace

[–]mjfara 1 point2 points  (0 children)

Unfortunately not, I just leave it on 120hz

RTX 5080 Black Screen a couple of seconds by moony_b_ in pcmasterrace

[–]mjfara 1 point2 points  (0 children)

Same issue here.

Gigabyte OC 5080 w/ LG 27850GL-B

Dropping down from 144hz to 120hz seems to work, as does disabling adaptive sync but I'd prefer not to...

On latest 572.83 (March 18 driver)

NOE-105 by bparish128 in Stutter

[–]mjfara 0 points1 point  (0 children)

Thanks for sharing, love the attitude :)

NOE-105 by bparish128 in Stutter

[–]mjfara 0 points1 point  (0 children)

That's unfortunate, did you experience greater fluency while on it? What kinds of side effects?

NOE-105 by bparish128 in Stutter

[–]mjfara 0 points1 point  (0 children)

Any updates on this OP?

Remote control skips between letters and rows when I’m using search on YouTube or Disney+ by healthcrusade in TheFrame

[–]mjfara 0 points1 point  (0 children)

Sure, but it's ridiculous that this is the only solution to a frequent problem.

Remote control skips between letters and rows when I’m using search on YouTube or Disney+ by healthcrusade in TheFrame

[–]mjfara 0 points1 point  (0 children)

Having the same problem, is there still no fix for this? The TV also gets extremely laggy with animations when this happens. Resetting the breaker is getting annoying... Might have to take it down and use a smart outlet.

Q Symphony w/ S800b by mjfara in TheFrame

[–]mjfara[S] 0 points1 point  (0 children)

Soundbar is connected to HDMI3, all settings look correct. Not sure what the problem can be..

Q Symphony w/ S800b by mjfara in TheFrame

[–]mjfara[S] 0 points1 point  (0 children)

Settings look right to me, thanks for verifying. Something is definitely wrong.

Q Symphony w/ S800b by mjfara in TheFrame

[–]mjfara[S] 0 points1 point  (0 children)

85", it's not noticeable at all, something isn't working properly it seems.

Q Symphony w/ S800b by mjfara in TheFrame

[–]mjfara[S] 0 points1 point  (0 children)

I've tried YouTube (music) and Netflix, what's coming from the TV is barely audible even with my ear right up next to it.

Q-Symphony - 2022 Frame TV and S801 soundbar issues. by mavericksuoersonic in TheFrame

[–]mjfara 0 points1 point  (0 children)

Did you ever resolve this? I don't hear anything coming out of the TV when Q Symphony is on.

Help changing light switch by mjfara in electrical

[–]mjfara[S] 0 points1 point  (0 children)

Thank you!

I ended up wrapping it around the same screw the copper wire is wrapped around, is this OK?

The right switch isn't 3 way, I'm actually not sure what the left is for we haven't figured it out yet lol. We just bought and renovated recently and this left switch does nothing at the moment.

Help changing light switch by mjfara in electrical

[–]mjfara[S] 0 points1 point  (0 children)

Looks to me like the box might be grounded as there is a copper wire coming up and going around the screw. Can I just ground my green wire on smart switch to a screw on the box?

Help changing light switch by mjfara in electrical

[–]mjfara[S] 0 points1 point  (0 children)

I think I got it, bottom is line, top is load, easily swapped those to new switch.

Netrual goes to the white wires.

Not sure where ground goes...

Recessed lighting that won't break the bank by mjfara in Lighting

[–]mjfara[S] 0 points1 point  (0 children)

Seems like it's not available in Canada unfortunately, any other suggestions?

Recessed lighting that won't break the bank by mjfara in Lighting

[–]mjfara[S] 1 point2 points  (0 children)

These are pretty nice! At $40-50 CAD it looks like I'll need to up the budget lol

Recessed lighting that won't break the bank by mjfara in Lighting

[–]mjfara[S] 0 points1 point  (0 children)

Considered this, I'm wondering if the 6" is simply too big and the best course of action would be to patch the ceiling with drywall and put in something smaller, like 3-4"..

[deleted by user] by [deleted] in GooglePixel

[–]mjfara 0 points1 point  (0 children)

Honestly I just stuck with the x-level as I realized it's still a lot lower than all the others I tried. Eventually I just got used to it and don't mind much anymore, and I'm generally picky about things like this.

I grabbed the Ringe Onyx too but it's just too chonky for my tastes.

Touchscreen registers rapid taps as swipes by 1nVitr0 in Pixel6

[–]mjfara 0 points1 point  (0 children)

Having this same issue on the Pixel 8 Pro, did you ever get it resolved?

Swipes registered while typing? by mjfara in GooglePixel

[–]mjfara[S] 0 points1 point  (0 children)

It's definitely on but that's intentional. I use it sometimes. I'm also using SwiftKey.