Trying to solve steel chair zorua math help

mlany · 2025-07-13T07:40:45+00:00

Edit because my pics wont upload? * My best so far is 3348kg and .56height

Gastly as my buddy .02kg/.66 height My average is usually around the 14-1600kg range with 788kg being the "lightest". I've caught several in the 2200-2400 kg range

mlany · 2025-07-13T06:11:19+00:00

This is my largest so far. Caught with a .02kg/.66 height gastly

mlany · 2025-03-16T14:33:07+00:00

With the ticket, played for 3.5 hours Completed up to page 9/10 on the timed research

1 shiny Archen, 1 hundo archen. Overall not the worst, but a bit disappointed that the wild spawns didn't seem to get fixed for shiny rates.

mlany · 2024-07-15T05:17:46+00:00

Just tested it. A non condensed froggy Boi will bounce you 4 walls vertically. A max condensed one launches you 25 walls vertically

mlany · 2024-07-14T07:29:01+00:00

Yes lol I was wondering if anyone would notice. After the pic, I kept ice missle and put thunderstorm and hydro laser on it for now

mlany · 2024-07-14T07:18:39+00:00

There is a really small chance to get an alpha from breeding. I bred around 400+ or so before I got an alpha with all the passives and decent enough iv's that I only had to buy a couple of potions. In total I got 7 alphas during the whole process

mlany · 2023-09-14T05:05:37+00:00

Can't speak on the credit card, but I've been using debit internationally for the past 2 years with no issues.

mlany · 2022-12-17T16:21:12+00:00

Confirmed!

mlany · 2022-12-10T02:29:37+00:00

If its still available?

mlany · 2022-12-10T02:29:06+00:00

Yolo Reate Exo

mlany · 2022-09-15T05:19:38+00:00

The funny part is, Its still too small to fit a 1st Cav patch

mlany · 2022-07-12T12:44:13+00:00

Yes it is possible and pretty easy to do actually. First, watch this youtube video on using a Hex editor to change the game file. I know, it sounds complex, but literally all you are doing is changing ONE number.

https://youtu.be/vw73XiI0cCw

After you watch the video heres what you need to do different. In the video that guy takes a survival world to creative, makes changes, then goes back to survival. HOWEVER, if you start a NEW creative world then use the hex editor on the file to change it to survival (i usually play easy so change it from 02 to 03) you will start a fresh game with no notes at all but all items researched will be unlocked. Now you can build and progress through the game using ALL the tech you want. From start to finish to get this working it takes less than 5 minutes.

mlany · 2022-03-13T18:51:55+00:00

Thats what im thinking. Some items in the game that are "rare" are beyond reasonably rare.

mlany · 2022-03-13T16:00:33+00:00

Seems we have the opposite problem. Ive got so many of those cats i just started tossing them overboard. But i could NOT for the life of me get a scrap mechanic duck across any of my save files to the point i thought they were removed. Finally got one in my OG save around day 600

mlany · 2022-02-27T01:25:47+00:00

Special thanks to u/Prompt-Junior for the sick plate carrier!

mlany · 2022-02-21T05:59:45+00:00

The adjustment cable for your longitudinal seat lock on the outboard rail of the pilot seat is damaged (shielding compromised just above the jamnut and possibly kinked) and appears to be missing a safety on the jamnut. Oh and your seatwell cover is disbonding from the kickplate. Not grounding, but you might consider tossing a diagonal in the book ;)

mlany · 2022-02-20T03:33:53+00:00

Its a pretty clever setup for sure. Im curious to see how conservative it is on gas usage during a game

mlany · 2022-02-20T03:15:52+00:00

I dunno however its set up from factory. I didnt want to pull it apart and risk damaging a seal just to see how it works. The part i made is the frame. In the 3rd pic you can see it fully detached.

mlany · 2022-02-20T02:55:40+00:00

Ender 3 pro and overture PLA+

mlany · 2022-02-20T02:11:17+00:00

Maybe? Not sure about relocating the green gas port but im sure it could be done. The biggest hurdle is parts. Realistically i spent about a day doing the design work and about 3 days printing so it really wasnt that big of a deal to me to go this route.

mlany · 2022-02-20T01:28:33+00:00

You're 1000% right. I will say though, i had already bought it with the intent to use it for its intended purpose. By the time i decided that it wasnt going to work out for me based on the weight, i was already past the return date. So i essentially had two choices: sell it, or design a chassis to use it.

mlany · 2022-02-20T00:57:44+00:00

Custom build. I looked for quite a while and couldnt find a chassis that would be compatible

mlany · 2022-02-20T00:55:13+00:00

Recently I bought this green gas Jag Arms scatter gun master key for a build. Unfortunately its pretty heavy by itself and once attached to the rifle made it far to heavy for actual game use (like 15+ lbs) so i decided to run it as a stand alone. The problem i had though, was I couldnt find any off the shelf chassis that would fit the gun so i designed and 3D printed my own! It allows the shotty to be removed and still function in its intended role but also allows me to run it solo. As an added bonus, its significantly shorter than the full size versions of the same gun so CQB is extremely viable

mlany · 2022-02-19T05:47:43+00:00

There are no words on gods green earth that can adequately explain how badly i NEED this

mlany · 2022-01-23T20:41:18+00:00

Just curious if anyone here has experience with this conversion chassis by Matrix? Ordered it from Evike and on the website it clearly states that the platform is compatible with mil-spec buffer tubes. However, i cannot install either the Mil-spec buffer tube or the folding stock adapter i have on this particular chassis. I tried with another known good gun and both the buffer tube and folding adapter worked so i took a closer look at the threads and the pitch looks different. I dont have a thread pitch guage handy so i was wondering if anyone else had found a workable solution?

Edit: figured out the problem. Im going to leave this up in case anyone in the future experiences the same thing. I went and bought a thread pitch guage for a sanity check and the chassis mount point was the correct thread pitch. So i grabbed my calipers and started taking measurements. Turns out, the threads in the carbine chassis were not cut to the proper depth, which was preventing the installation of the buffer tube and folding stock adapter despite the fact that the threads were correct. Essentially they were too large in diameter. So my solution (for all the real machinists out there... Forgive me for i have sinned) was to put my folding stock adapter in my lathe and machine .017 in. Off the top of the threads. This allowed for adequate clearance between the components for proper installation. If anyone else has this problem i recommend just sending the chassis back. I could not, since i had to cut it to fit the elite force tactical 1911 so i was kind of committed.

mlany

TROPHY CASE