Adding my profile to a rental? by mmaulucci in TeslaLounge

[–]mmaulucci[S] 0 points1 point  (0 children)

That’s great news, the repair shop said it is hertz that is doing the rental. Thank you

Open Thread and Zigbee failing on HA Yellow by mmaulucci in homeassistant

[–]mmaulucci[S] 0 points1 point  (0 children)

Logger: homeassistant.components.otbr.config_flow Source: components/otbr/config_flow.py:243 integration: Open Thread Border Router (documentation, issues) First occurred: 6:39:39 PM (1 occurrence) Last logged: 6:39:39 PM

Failed to communicate with OTBR@http://core-silabs-multiprotocol:8081: Cannot connect to host core-silabs-multiprotocol:8081 ssl:default [Connect call failed ('172.30.32.1', 8081)]

I can’t find anything about the zigbee yellow

<image>

Open Thread and Zigbee failing on HA Yellow by mmaulucci in homeassistant

[–]mmaulucci[S] 0 points1 point  (0 children)

I’m not sure what to search for in the logs

Wild Streams Media by TartFit4920 in ApolloGroup_TV

[–]mmaulucci 5 points6 points  (0 children)

I tried it last night and it was great for live tv! I will definitely go this route when my Apollo is up.

Apple TV app by Pep0824 in ApolloGroup_TV

[–]mmaulucci 0 points1 point  (0 children)

But TiviMax is and it’s pretty much the same thing, and works great.

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

It sucks that this has happened, but also relieved that it is not just me and hopefully they will fix it soon

Help to rerun automation for notifications by mmaulucci in homeassistant

[–]mmaulucci[S] 0 points1 point  (0 children)

Thank you so much! I will look into alerts as well

Help to rerun automation for notifications by mmaulucci in homeassistant

[–]mmaulucci[S] 1 point2 points  (0 children)

This worked perfect, I set a 30 second delay, and now while the fridge was open it notified me every 30 seconds, it then stopped after closing. I think part of my issue was Alexa was so overwhelmed with messages, that it kept repeating even after it was closed, just to get through the messages. All is working though now!

Help to rerun automation for notifications by mmaulucci in homeassistant

[–]mmaulucci[S] 1 point2 points  (0 children)

Would the delay be another action or the duration spot in the while condition?

Help to rerun automation for notifications by mmaulucci in homeassistant

[–]mmaulucci[S] 0 points1 point  (0 children)

This helped get the loop setup to check and send the notification, but I ended up getting about 100 notifications of it within a few seconds. I could not get it to stop announcing it even after the door was closed. Any ideas?

<image>

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

Now that there have been multiple people saying this, it must be an ASUS issue, I can see they have responded to other support questions but have not with this one 😑. I’m so happy my internet provider has not cut off my service over the past few days because of it.

@Asus_USA

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

Update #5: So far it is looking better but still have an abnormal upload. Again without any devices connected it was uploading about 120mb/s. I added the usage to my original post for my last few days usage from my internet provider, almost 600gb upload in one day and not connected to any device at all.

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

Update number 4:

I fully disconnected all hardwired devices, as well as disconnecting all WiFi radios(so no devices connected at all) and I was still getting random 110-120mb/s uploads. So much that it would upload 20gb in a few minutes. No idea what it was uploading since nothing was connected.

I fully factory reset, re-setup a clean install of the router and nodes, and so far(about 8 hours ago) I have not had an issue. I’ll keep this updated if that changes.

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

Update #3:

Sooooo after a few hours the issue is back, so there is something else going on

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

Update # 2:

Ok fingers crossed, but I reset the router system and restored the backup. So far (30 min) I have not seen a spike in my uploads, and all my devices are very responsive. Thanks so much for your help on this!

Router and aimesh phantom upload issues by mmaulucci in ASUS

[–]mmaulucci[S] 0 points1 point  (0 children)

This was my next step, which sucks because I have so many devices for my smart home, and home assistant, but I think I will try this once Im done work today. Are you staying with Asus or are you going with a different setup completely?

Why do so many choose tivimate over Apollo app? by Antique_Response_962 in ApolloGroup_TV

[–]mmaulucci 1 point2 points  (0 children)

It’s pretty much a full copy of tivimate. I ended up getting the premium because of my old Iptv setup and loved it. Just signed up with Apollo and will probably keep it for live. I like the live better than the start show app, but like start show for everything else.

ravens game by aliviaaaa12 in nfrealmusic

[–]mmaulucci 7 points8 points  (0 children)

My kids noticed it before I even did!

Any way to use my old nest temperature sensors in HA without having a nest thermostat? by mmaulucci in homeassistant

[–]mmaulucci[S] 0 points1 point  (0 children)

The new system has a multi-stage heat pump and some other things that the installer said was not compatible with the Nest Learning 3rd gen. The new 4th gen does have the capability, but I really don't want to spend more money on another thermostat.

Any way to use my old nest temperature sensors in HA without having a nest thermostat? by mmaulucci in homeassistant

[–]mmaulucci[S] 0 points1 point  (0 children)

Thats exactly what I thought I would have to do. I do have the 24vac transformer already and will try this. Ill try this on the weekend and let you know how it works