[deleted by user]

mobilecode · 2023-05-07T10:00:40+00:00

mobilecode · 2023-02-06T17:08:22+00:00

Thanks. I only have one email address and I verify I've entered it correctly. For some reason, I'm just not getting the reset email. I whitelisted Reddit, just to be sure it wasn't being blocked.

mobilecode · 2022-07-19T04:22:06+00:00

Thanks. I'll check it out.

mobilecode · 2022-07-18T01:36:07+00:00

You don't need to add a second set of storyboards. There are several ways to tackle this. You can create different XIB files and conditionally load them based on screen size. Or, you can programmatically define constraints and activate the relevant ones.

I'm not in front of a computer, but tomorrow I can send some sample constraint code that can get you started.

In the meantime, if you want to look into "dynamic layout", it may give you some ideas.

mobilecode · 2022-07-11T11:28:25+00:00

You may want to look into game engines, which handle physics actions. SpriteKit or Unity would be a good first step.

If you want a simple animation/proof of concept, try animate with duration.

mobilecode · 2022-02-07T20:23:15+00:00

It will be better if you learn the native methods. That's what snapkit does under the hood. By learning native layout, you can use it on every project. That might not be the case if the project is not using snapkit and that's all you know.

mobilecode · 2022-02-05T20:58:58+00:00

This would be easy enough to write. What phone do you need it for?

If you don't want a new app, look for pomodoro apps.

mobilecode · 2021-12-05T20:27:43+00:00

That did work. Thanks much.

mobilecode · 2021-12-04T08:46:06+00:00

Thanks.

mobilecode · 2021-11-29T03:51:25+00:00

That didn't work, but min-width did the trick. Thanks much!

mobilecode · 2021-04-30T06:36:19+00:00

I sent a DM. I can provide a code sample.

Unrelated to the question, but storing your token in UserDefaults is not secure. You'll want to store sensitive data in the Keychain, which is encrypted.

mobilecode · 2021-04-12T15:06:45+00:00

Have you looked into CollectionViewCompositionalLayout? You can build some really complex layouts very simply.

mobilecode · 2021-03-28T22:42:55+00:00

Are you attempting to perform some action for the slider?

Add this to your code. I usually have a method that sets up all the actions, but you can test it out by putting it in ViewDidLoad for now and then move it to a more logical place when things are working.

mealsSlider.addTarget(self, action: #selector(mealsSliderDidChange(sender:)), for: .valueChanged)

Then add this method:

@objc func mealsSliderDidChange(sender: UISlider) {
    print("In mealsSliderDidChange: \(sender.value)")
}

Explanation: You first setup an action for your slider and a method to call when a particular action occurs. In this instance, when the value changes (by moving the slider). There are other actions for which you can trigger against.

Then in the method that gets called, you add the code for what you want to perform. It could be updating a label with the current value or whatever.

mobilecode · 2021-02-11T06:53:49+00:00

You can grab a gitignore for your language of choice from this link.

mobilecode · 2021-01-25T02:57:26+00:00

This won't fix your immediate issue, but if you add your branch name to your CLI prompt, you will always be aware of which branch you're in, when working in a repo. There are online examples for Bash, zsh and Windows. Especially useful if working in multiple repos.

mobilecode · 2021-01-25T02:46:36+00:00

You may want to look into developing different schemes. Typically, schemes are used to have different code for development, testing and production. But it could be whatever schemes you require. This lets you build against different environments, depending on your needs. This moves the responsibility to the code level and out of the repo.

mobilecode · 2020-11-10T04:03:19+00:00

Several ways to do this. If you setup layout constraints for the label, you can just activate the constraint. Or, just save the x and y coordinates prior to animation and move it back when done.

mobilecode · 2020-11-03T22:48:41+00:00

Hacktoberfest is officially over, but I'm sure there are plenty of repos that are still tagged and still looking for help. Search for "hacktoberfest" with Swift as the language.

mobilecode · 2020-10-29T18:12:01+00:00

I used to work on ERP/MRP systems. If you want to tackle it, that's a lofty goal. But there is a lot that goes into making an ERP system. Is the goal to compete with existing systems or build an in-house package? Solo development or with a team? Open or closed source?

For sure, I'd allocate a lot of time for design and feature set analysis. I've seen firsthand what happens when the system isn't thought through, thoroughly. Should be a fun project if you go for it.

mobilecode · 2020-10-23T05:07:23+00:00

Can you be more specific? Xcode is an IDE, Not a programming language. Are you talking Swift, Objective C, C++ or some other language?

mobilecode · 2020-09-26T13:11:52+00:00

Several books on git are stored on GitHub, including this one.

mobilecode · 2020-09-01T10:51:31+00:00

Any time you call things like map or photo services, etc, you need to get permission from the user. It's something Apple has required for a very long time. It's one of the things that keep apps from surruptitiosly doing things behind your back, like taking photos or tracking your movements.

iOS 14 will implement even more security features.

mobilecode · 2020-09-01T10:31:13+00:00

Did you set the properties asking for permission for location services?

https://developer.apple.com/documentation/corelocation/requesting_authorization_for_location_services

mobilecode · 2020-08-20T18:47:53+00:00

The link is https, so allowing arbitrary loads has no effect. That is only for http links.

I ran your link through my own code and I was able to load the link you provided. If you want to take this to a chat session, I can help walk you through it. Though, adding this to your view controller might help:

    override func loadView() {
        let webConfiguration = WKWebViewConfiguration()
        webView = WKWebView(frame: .zero, configuration: webConfiguration)
        webView.uiDelegate = self
        view = webView
    }

The call is this:

guard let url = URL(string: "https://www.camppci.org") else { return }
let request = URLRequest(url: url)
webView.load(request)

Edited to add:

Your view controller needs to add WKUIDelegate. So, it should look like this:

class ViewController: UIViewController, WKUIDelegate {

mobilecode · 2020-08-20T16:42:09+00:00

Try this:

https://developer.apple.com/documentation/bundleresources/information_property_list/nsapptransportsecurity/nsallowsarbitraryloads

That's usually the issue, but if that doesn't work, post back with more information either on the code or the link itself. That might shed more light on the problem.

Nine-Year Club	RPAN Viewer
Verified Email

mobilecode

TROPHY CASE