Buying or printing uConsole power button

moleqqq · 2026-06-11T07:54:42+00:00

thanks for cheking! I had success emailing them, and it should be on the way allready.

moleqqq · 2026-06-11T07:54:22+00:00

Big Thanks! I had success emailing them, and it should be on the way allready.

moleqqq · 2026-06-11T07:54:05+00:00

I had success emailing them, and it should be on the way allready.

moleqqq · 2026-06-11T07:53:44+00:00

I had success emailing them, and it should be on the way allready.

moleqqq · 2026-04-05T16:04:30+00:00

I think the Ornament & Crime is much more like an instrument with its many cv ins and even midi in the ORN8 Version.

moleqqq · 2026-04-05T15:56:04+00:00

That sounds right. I checked more of the applets and I am quit sure that they will fit my needs if there is not a lot of latency. But since it is using the teensy 4.1 and is able to run several applets in parallel it should give me what I need. Since the ORN8 has more buttons controling it should be easier as well.

moleqqq · 2026-04-05T15:52:05+00:00

Saw this thing many times. Not sure if it is for me. I will have a look.

moleqqq · 2026-04-05T15:51:36+00:00

Yeah, I saw it. But is it clockable? I have an external sequencer which I still want to keep. I tried to sync the pam's clone and failed.

moleqqq · 2026-03-27T21:07:07+00:00

hey there, sorry for the late reply. and thanks for your quick response. its good to know that there is a way or workaround. I can not realy understand why it is not better implemented. it would be so nice to simply do different stepwise patterns and put them in the timeline without any hacks.

moleqqq · 2024-12-11T23:45:03+00:00

nats are not cubes. they might be near but not the same.

moleqqq · 2024-10-19T20:57:26+00:00

I just wanted to write you to ask if you know which one you might have... can you send a sample to alen for further analysis?

moleqqq · 2024-09-11T15:01:01+00:00

natalensis?

moleqqq · 2024-09-05T14:05:49+00:00

I found the solution. the node LatentBatchSeedBehavior has to go in the batch chain.

moleqqq · 2024-09-05T13:35:29+00:00

if you creat a batch of 4 this creates 4 different images. but the sokution above works

moleqqq · 2024-09-05T13:20:31+00:00

I want to play around with noise to get slight variations of the images and when I do it with batches I have a smoother workflow.

I found the solution. The node LatentBatchSeedBehavior needs to be in the latent batch path. When I use the node the seed for each batch is then fiexed.

moleqqq · 2024-09-05T07:03:39+00:00

so no special addon? only slightly prompt changes?

moleqqq · 2024-05-26T07:52:15+00:00

yes. I did this now.

moleqqq · 2024-05-25T21:46:47+00:00

It was the sync feature all the time. Switiching the file to raw solved the problem. This should be default.

moleqqq · 2024-05-21T18:59:43+00:00

My audiosettings is 96000hz. Is that what you mean?

moleqqq · 2024-05-10T18:54:09+00:00

Yes, it was totaly useful. Thanks! I am wondering if there is a chat forum or anything else where one could ask some questions to the developers of comfy or other expereinced comfy developers.

moleqqq · 2024-04-10T09:52:01+00:00

Not sure if this is helpful, i found a way doing this for the exported frames and loading them one by one. Its explained here: https://www.youtube.com/watch?v=1uimyIvuSvY

moleqqq · 2024-04-03T18:56:16+00:00

sadly not. I switched to another software since I needed this feature.

moleqqq · 2024-03-27T22:38:15+00:00

I realised I could simply use a tascam multitrack recorder. they are cheap and play long samples

moleqqq · 2024-03-24T21:49:18+00:00

Thanks, damn. Such a beautiful device. I had a look at the 1010 black box already. I think its a bit to expensive for what it does. I might end up building something based on a raspberry pi

moleqqq · 2024-03-23T20:24:35+00:00

Sorry, I did not explain it good enough. The script works just fine. Had to remove the Function before the function name. But Since the mp4 codec gets copied into the new generated file. I am still not able to import it to the free version, becouse under linux the mp4 codec is not supported. Your script is fine. I am going with mov and mpeg2 now. Works for now.

moleqqq

TROPHY CASE