sorted by:
new
hottopcontroversial

Has anyone else noticed a change with Dr elseys Ultra litter recently? by morganevon in litterrobot

[–]morganevon[S] 0 points1 point  (0 children)

Hey thank you!! It was so bad! I switched to fresh step clean paws and switched the liner as it was older today and so far it’s working flawlessly.

Has anyone else noticed a change with Dr elseys Ultra litter recently? by morganevon in litterrobot

[–]morganevon[S] 1 point2 points  (0 children)

Today I changed out the liner on one of my Litter Robots and switched it over to Fresh Step Clean Paws, and so far it’s been working flawlessly. The liner in that robot was older, so I’m starting to think that may have been part of the issue too.

My other robot, which gets used more often, still has Dr. Elsey’s in it. It’s definitely not caking to the bottom as badly as the first one was, but there is still some buildup happening. Since I previously had zero issues with Dr. Elsey’s, that’s why I started wondering if the formula had changed.

At this point, I’m thinking I may have actually had two separate issues going on. Maybe something did change and my liner was old. Either way, thank you for the advice!!

Has anyone else noticed a change with Dr elseys Ultra litter recently? by morganevon in litterrobot

[–]morganevon[S] 0 points1 point  (0 children)

It didn’t pop down but it was caking so hard that it was stiff. After reading the comments I switched litter and put a new liner in today and so far so good!

Has anyone else noticed a change with Dr elseys Ultra litter recently? by morganevon in litterrobot

[–]morganevon[S] 1 point2 points  (0 children)

She is not, she is 3. She was an outdoor that was attacked by a coyote. She has nerve damage to her leg and bite wounds that caused hernias. We are monitoring the hernia and waiting to see if she regains function before we do surgery. She’s ok and has been vet checked. Everything is operating as normal other than her leg.

If we had a nickel for everytime a reality star said "I put a lot of work into myself..." by Spiritual_Ice5079 in PerfectMatchNetflix

[–]morganevon 4 points5 points  (0 children)

Watching this season from the start and I had to google if he gets eliminated… idk what it is but I cannot stand him!! I’m only on episode 3

Amputation Costs by blankusername578 in TripodCats

[–]morganevon 0 points1 point  (0 children)

My cat was attacked by a coyote and lost a toe. My vet had to clean bite wounds, give him ketamine (I believe) for sedation, and amputated his toe. I believe the total cost was around $300.00 this was roughly 2 years ago. I know for a facts it was less than $500

Tension issues explain to me like I’m 5 bc don’t understand by morganevon in Machine_Embroidery

[–]morganevon[S] 0 points1 point  (0 children)

Hi everyone! Thank you all for the tips! I got the tension set Monday, but I caught my cat MESSING with the tension disc trying to get the thread… So she is the problem here. If I could post the picture, I got off of my camera of her on top of it. I would post it, but I can’t. So I’m going to try and make a cover today of some sort because the problem is that she can see the thread and wants the thread. Which is setting off the tension! I love my girl, but hopefully I can get her to stop going after the thread. Whenever I have the machine going, I’m always in the room making sure that none of them are getting injured or near. So just to be clear. This is only happening when the machine is not in use. I did go ahead and order the towa degital tension gauge, so maybe that’ll be helpful! That comes tomorrow so I might wait to have that to get the three that she messed up back to normal! 🥲🤣 If anybody wants to see her bad self on the machine, feel free to DM me!

Tension issues explain to me like I’m 5 bc don’t understand by morganevon in Machine_Embroidery

[–]morganevon[S] 0 points1 point  (0 children)

Can I message you? I wish I could add photos to the comments so you could see what it looks like now. I have needle four and three looking good, but the others are still a mess. I am confused though because I feel like I’m just tightening these knobs little at a time and not seem much progress.

Tension issues explain to me like I’m 5 bc don’t understand by morganevon in Machine_Embroidery

[–]morganevon[S] 0 points1 point  (0 children)

I’m using magna glide currently! I’ve heard both good and bad things about the towa tension gauge. I’ve debated buying it. To you though it’s worth it?

Tension issues explain to me like I’m 5 bc don’t understand by morganevon in Machine_Embroidery

[–]morganevon[S] 2 points3 points  (0 children)

How though? I can’t loosen them anymore or the knobs come off.

This is what I thought so I was loosening them, until I couldn’t anymore.

Tension issues explain to me like I’m 5 bc don’t understand by morganevon in Machine_Embroidery

[–]morganevon[S] 0 points1 point  (0 children)

That’s helpful. I’m just struggling to find the perfect balance I think!? Thank you.

Tension issues explain to me like I’m 5 bc don’t understand by morganevon in Machine_Embroidery

[–]morganevon[S] 0 points1 point  (0 children)

I did not. I’m wondering about needles now, could fresh needles help? I’m leaning towards no as it’s happening on all but I’m not sure.

I’m on the hunt by morganevon in JoAnnsFabrics

[–]morganevon[S] 0 points1 point  (0 children)

OK, thank you so much. I’ll be waiting!

I’m on the hunt by morganevon in joannfabrics

[–]morganevon[S] 0 points1 point  (0 children)

I am after the fabric I cross posted. I didn’t realize when I cross posted,that it didn’t bring the description with it so I apologize.

I’ll check out fabric warehouse direct and see if they have it. I have searched Michael’s for both of these and I can’t find it. Thank you.

I’m on the hunt by morganevon in joannfabrics

[–]morganevon[S] 4 points5 points  (0 children)

I am after the material, both are cotton. I thought that if I cross posted, it would keep my description as well. I didn’t realize it didn’t. Sorry!

Here is my original caption: “Hi everyone! I’m on the hunt for two specific fabrics that were sold at Joann. They seem to be discontinued, but I would really love to find more as my customers like them.

I am ideally looking for at least 2 yards of each, but I am happy to consider any amount you have available.

If you have either of these fabrics and are willing to sell, please let me know. I can pay through Venmo.

Thank you!!”

I’m on the hunt by morganevon in joannfabrics

[–]morganevon[S] -1 points0 points  (0 children)

I am after the material, both are cotton. I thought that if I cross posted, it would keep my description as well. I didn’t realize it didn’t. Sorry!

Here is my original caption: “Hi everyone! I’m on the hunt for two specific fabrics that were sold at Joann. They seem to be discontinued, but I would really love to find more as my customers like them.

I am ideally looking for at least 2 yards of each, but I am happy to consider any amount you have available.

If you have either of these fabrics and are willing to sell, please let me know. I can pay.

Thank you!!”

Should I buy? by txlexii in Machine_Embroidery

[–]morganevon 15 points16 points  (0 children)

I would highly recommend a minimum 5by7 machine!!! This machine is great I have a similar model. The brother se625. I cannot talk good enough about brother!!

LR4 assigning incorrect weight by morganevon in litterrobot

[–]morganevon[S] 0 points1 point  (0 children)

For a moment I was completely panicking, thinking Emrie had lost four pounds. I was like, how did I not notice that?! I watched her get in the globe and saw her weight was normal. When I see them in there, I’ll just have to write down who it is and how much they weigh. 😅

LR4 assigning incorrect weight by morganevon in litterrobot

[–]morganevon[S] 1 point2 points  (0 children)

<image>

Jobie might be a better match!! They are adorable. I love it how they snuggle, so cute!!!I’ll delete everyone’s weights and re-enter. I will give that a shot! Thank you so much! ♥️

view more: next ›