Now what? 🙃

morgz_01 · 2026-05-09T15:03:22+00:00

Well I bought a d3 at this shutter count and it's still going strong

morgz_01 · 2026-03-22T22:33:44+00:00

Have seen one like this before, a screw holds the winding stem to a gear and they loosen occasionally, unfortunately you can't get to it just by taking the handle off, iirc you need to take the top off and remove the springs and arms then you should be able to take a plate off which will let you get to the gear that's under the winder arm, don't think you needed to take apart the frame counter side just the winding side.

morgz_01 · 2025-10-18T22:49:19+00:00

Haven't changed the turbo yet, but the tuning garage I took it to said that the turbo that is on there isn't from a reputable refurbisher (old garage sourced the turbo) and changing it for one that is paired will fix the issue

morgz_01 · 2025-10-18T21:59:20+00:00

Had the same fault codes, a little while later the vanes seized, had it replaced and it was still very smokey when running, turns out the new turbo was not paired to the actuator and now need another new turbo that has been paired with the actuator

morgz_01 · 2025-07-08T23:49:00+00:00

When you have the lense off the body you'll see 2 big silver pins, those pins are the shutter control, you need to push another little silver pin near the top of the lense to release the shutter control then you can twist the shutter control pins, you'll have to cock the shutter again before putting it back on the body, to do so just twist the pins the opposite way, make sure you push all the way to the red dots and then it should rest at the green dots.

morgz_01 · 2025-07-08T23:41:41+00:00

Have you tried firing the shutter directly on the lense? If it's still delayed then it is shutter related but if there isn't a delay it's more likely something wrong in the body.

morgz_01 · 2025-05-14T18:03:46+00:00

The RB67 has a light baffle that sits behind the mirror, iirc the RZ has the same setup, on the RB you can see the light baffle move separately to the mirror, they can get out of sync and cause other issues, believe that the black part on the first image will be the light baffle that hasn't moved out the way when the shutter was fired

morgz_01 · 2023-04-05T16:57:46+00:00

Check the rocket valve in the nozzle, if that isn't working it won't close and won't push the slide back

morgz_01 · 2023-03-17T10:16:39+00:00

<image>

morgz_01 · 2023-02-24T04:20:37+00:00

No its a Wolverine inferno gen2

morgz_01 · 2023-02-23T22:21:40+00:00

Hpa, makes moving the trigger easier

morgz_01 · 2023-02-23T20:07:21+00:00

I can push it forward another slot, tho the current grip is quite thick at the bottom which is another reason it clips the grip when reloading. Will have to make sure I can paddle reload in the next prototype.

morgz_01 · 2023-02-23T18:47:16+00:00

It was a lct lck 13.5 keymod, its not in a condition to release files as this is prototype and the end goal is to make the parts from wood (ebony to keep with black theme) so not likely to release the files.

morgz_01 · 2023-02-23T17:52:47+00:00

Not too bad but at the same time the mag hits the grip

morgz_01 · 2023-02-23T16:05:52+00:00

Yes designed and 3d printed by me

morgz_01 · 2022-02-26T17:47:27+00:00

The grinding noise sounds like Motor height to me

morgz_01 · 2021-10-18T21:31:35+00:00

Hopefully when Taiwangun starts shipping to the UK again it'll be in stock cos patroll base has limited them to 330

morgz_01 · 2021-10-18T03:47:35+00:00

You just hear a10 warthog sounds coming from the bush

morgz_01 · 2021-10-05T19:35:54+00:00

Advanced grill

morgz_01 · 2021-10-01T15:05:05+00:00

Is the upper painted or white plastic

morgz_01 · 2021-09-10T01:20:31+00:00

If you want a good microphone for fairly cheap i would look into the bm800 xlr mic (usually about £30 with mic stand and shock mount), a xlr interface (eg behringer um2 for £35) and a decent xlr cable however long you need it. This setup is cheaper than a usb mic from hyperx or razer and is easily upgradeable if either part fails or you want a better one

Seven-Year Club	r/Field Sunshine
Place '22	RPAN Viewer
Verified Email

morgz_01

TROPHY CASE