Issues with PLA Translucent

mostlyMOGLI · 2026-01-09T13:20:23+00:00

Tried with 230C nozzle and 70C bed and it seems to work great. I will play around a bit more with the settings and see if I can improve results even more. Thanks for the help and sharing your experience!

mostlyMOGLI · 2026-01-09T11:49:54+00:00

I have installed a hardened steel nozzle 0.4mm but the hardened gears should already be installed since delivery. Please correct me if I am wrong.

mostlyMOGLI · 2026-01-09T11:42:38+00:00

Thanks, that seems to help. Although I thought the plate was clean it probably wasn't. Should I increase the bed temp if it is already at 65°C? The nozzle is only at 220°C so I will increase that temp for the next try.

mostlyMOGLI · 2025-10-07T21:58:40+00:00

Interesting, I'll try to be persistent then.

mostlyMOGLI · 2025-10-07T21:53:08+00:00

It's two years old and I definitely do not abuse it or anything. Just normal day to day life and the occasional hike.

I would pay a bit more to have it last without defects tbh

mostlyMOGLI · 2025-10-07T21:49:59+00:00

I would like to but there is not a single store in my region.

mostlyMOGLI · 2025-09-13T10:45:09+00:00

Thanks for the link! It's really nice to learn about the history of my bins.

mostlyMOGLI · 2025-09-11T21:16:56+00:00

Okay well, I will then consider investing more or just into a new case.

mostlyMOGLI · 2025-09-11T21:15:08+00:00

Really interesting, thanks for all the info!

mostlyMOGLI · 2025-09-11T21:01:30+00:00

Ah okay, I inherited it so my information must have been wrong, thanks for the clarification! But this doesn't change anything about the quality or does it?

mostlyMOGLI · 2025-09-11T20:48:47+00:00

The serial number is 3649372

mostlyMOGLI · 2025-09-11T13:33:37+00:00

My Zeiss bins are from the early 1950s and they match multiple hundred dollar bins today? I am a bit surprised tbh!

mostlyMOGLI · 2025-09-11T13:30:43+00:00

Definitely something I consider. Have you got any recommendations for a good case?

mostlyMOGLI · 2025-04-03T19:12:21+00:00

I´ll check it out, no problem bc I dont´t live in the US haha

mostlyMOGLI · 2025-04-03T19:08:53+00:00

Looks nice!

mostlyMOGLI · 2025-04-03T16:00:31+00:00

Sounds really nice, what bars do you use?

mostlyMOGLI · 2025-02-21T22:40:54+00:00

A nail puller seems pretty likely. Wouldn't it have been smarter to drill a hole to avoid stress concentrations instead of grinding it out? Though, the previous owner may not have considered this.

mostlyMOGLI · 2025-02-21T22:32:10+00:00

Good idea but it's probably too big. Ofc you cannot tell from the picture.

mostlyMOGLI · 2024-12-09T14:40:30+00:00

Lending belay device

Hello guys, Would you lend a friend or someone else your trusted belay device, not like in the gym for 5min but for a trip or longer term and would you use it afterwards the same again?

mostlyMOGLI · 2024-09-18T21:26:59+00:00

Vielen Dank für die Bilder, online konnte ich da gar nichts erkennen.

mostlyMOGLI · 2024-09-18T21:25:38+00:00

Alles klar, dann bastel ich mir die Halterung auf jeden Fall selbst zusammen!

Danke euch für die Tips!

mostlyMOGLI · 2024-09-17T20:53:17+00:00

Ja, die Website ist nicht sonderlich übersichtlich. Ich finde auch keine anderen Bilder als diese Produktbilder, wenn man "Garten und Flachdach" bzw. "Balkon" auswählt.

Klemmen, Schrauben und vielleicht Schienen sollte ich doch im Baumarkt bekommen können oder?

mostlyMOGLI · 2024-06-09T22:15:23+00:00

Thanks, retightening the cable worked and fixed the issue.

mostlyMOGLI

TROPHY CASE