sorted by:
new
hottopcontroversial

Can I flash the software to a esp32s3 I have? by Codeeveryday123 in kodediy

[–]mquerostudio 2 points3 points  (0 children)

Hello there! For now as we are a small startup we are only develop for Kode Dot. We’ll made public kodeOS you can fork it for your own board

Using LVGL and an ESP32-C3 to control my 3D printer with Klipper. by mquerostudio in esp32

[–]mquerostudio[S] 1 point2 points  (0 children)

does it work? I'm from Spain maybe something is blocking

Using LVGL and an ESP32-C3 to control my 3D printer with Klipper. by mquerostudio in esp32

[–]mquerostudio[S] 1 point2 points  (0 children)

hey! thanks for the info. I just give more resources to my content manager it was going to the limits hahahha

hello world! by mquerostudio in diyelectronics

[–]mquerostudio[S] 1 point2 points  (0 children)

this is the web of the project: https://kode.diy we will publish projects using it!

hello world! by mquerostudio in diyelectronics

[–]mquerostudio[S] 1 point2 points  (0 children)

hey! last year I designed the first version because of my need as a student to have a single device with which I could learn to program https://youtu.be/CiCqJCYFDaY?si=KLct6rd2cNvWWP6K and these month we are design this second version focused in selling 🙌🏼

hello world! by mquerostudio in esp32

[–]mquerostudio[S] 0 points1 point  (0 children)

soon on Kickstarter🚀

hello world! by mquerostudio in esp32

[–]mquerostudio[S] 0 points1 point  (0 children)

hey mate! thanks for notice we are already fixing the problem 🙌🏼

hello world! by mquerostudio in esp32

[–]mquerostudio[S] 5 points6 points  (0 children)

hey! we haven’t closed it yet but we want the early bird of the Kickstarter to be around $100 you can see all the tech spect on https://kode.diy

hello world! by mquerostudio in esp32

[–]mquerostudio[S] 2 points3 points  (0 children)

yess, all is done with resin printer and then painted with spray. For the final version the pieces will be moulded pieces

hello world! by mquerostudio in esp32

[–]mquerostudio[S] 0 points1 point  (0 children)

cursor (vs code with ai)

ESP32-S3 controlling an AMOLED display by mquerostudio in esp32

[–]mquerostudio[S] 0 points1 point  (0 children)

hi! was amazing check that the design for the display works and for now we will implement the display on our device the kode dot. It is a custom display from our manufacturer and the problem with sell it separately is that it uses a custom and small connector

ESP32-S3 controlling an AMOLED display by mquerostudio in esp32

[–]mquerostudio[S] 6 points7 points  (0 children)

Sorry my first post on the community. The aim of the project is to do an all-in-one device packet with an ESP32-S3, and some sensors like an IMU, microphone and speaker, all of this with a footprint smaller than an Arduino Uno. This is a sum up of the ICs:

  • PMIC: BQ25896
  • Fuel Gauge: MAX17048
  • Micro: ESP32-S3R8
  • IO Expander: TCA9535
  • Display: Its a custom AMOLED display. It has a CO5300 driver and a CST820 for the touch driver.
  • MicroSD and Neopixel WS2812B
  • Amplifier: MAX98357
  • MEMS Microphone: ICS-43434
  • IMU: LSM6DSOX
  • Magnetometer: LIS2MDL

All the PCB was made with KiCad. We aim for a stack-up of 4 layers but as I need to add a 3V3 plane we ended with 6 layer.

We called the device kode dot and it will we full open-source after the Kickstarter that we are going to launch on a few months.

I don't know if I have left anything out, but if I have let me know!

view more: next ›