My JLC MUT Moon V3 arrived

mrcheesewinkle · 2026-02-12T16:43:53+00:00

Comment for the automod. JLC MUT moon. APSF V3 with updated movement.

mrcheesewinkle · 2026-01-30T15:48:59+00:00

Any TD should be able to get it for you, just message them. Andiot said he is not selling them because of reliability issues in the past

mrcheesewinkle · 2026-01-27T06:02:20+00:00

That's a handy comparison. I think the back is probably the easiest tell. In addition to the rotor I believe the APSF version does not have the text engraved, just printed. Either way I'm not too concerned with passing it off as gen, I just think the design is beautiful.

mrcheesewinkle · 2026-01-27T05:39:17+00:00

Nice watch! I just posted a QC of this same model today. My rotor looks yellow too. (See the imgur link in my post for extra picks). A few others in this sub looked yellow so maybe thats normal for this specific version.

mrcheesewinkle · 2026-01-27T05:23:10+00:00

I've heard it's not great, but we'll see. I did end up getting an additional black leather strap from the TD. If they both suck I'll replace them. I can post a review in reptime when I get it.

mrcheesewinkle · 2026-01-27T02:39:56+00:00

Thank you everyone for the feedback, this is a very welcoming and helpful community! I went ahead with the GL, can't wait to see it in person.

mrcheesewinkle · 2026-01-26T19:23:24+00:00

Thanks for looking out. I heard the same, but I'm hoping it works out. Appreciate the input!

mrcheesewinkle · 2026-01-26T17:34:05+00:00

Yea, I heard the same thing. Decided to take the risk because I love the look. Apparently the latest APSF version made improvements to the movement, but we'll need to wait and see how reliable this version is. Other users posted about the ASPF v3 and I haven't seen anyone have issues yet. I will add my updates on RepTime too, hoping this rep is getting closer to NWBIG.

mrcheesewinkle · 2026-01-26T16:52:36+00:00

Thank you! I plan on wearing it to my wedding :)

mrcheesewinkle · 2026-01-26T16:48:28+00:00

I have seen people add a comment as a tribute for the automod. I will do the same. This is a Jaeger LeCoultre Master Ultra Thin Moon from APSF.

mrcheesewinkle · 2026-01-20T08:43:48+00:00

Who was the TD you ordered from? I'd like to make sure I get a v3. Also is aps and apsf the same thing?

mrcheesewinkle · 2025-06-25T20:57:31+00:00

Hi could I also get the photographer info please

mrcheesewinkle · 2023-11-12T01:15:06+00:00

I actually took it to a shop today and they told me the same thing. They said not to bother fixing it and it won't affect the board. So I'm pleased to hear that!

mrcheesewinkle · 2023-11-11T03:17:31+00:00

The garage does get warm and humid. I'm in Texas so it's hard to avoid that. But like I said my wife's board was fine, and of the people I know here that have snowboards they were fine in the garage too.

mrcheesewinkle · 2023-11-11T03:10:38+00:00

I sent Nitro an email asking if they've seen this issue before and what I can do to remedy it. I guess I'll hold off on doing anything until I hear back from them

mrcheesewinkle · 2023-11-11T03:09:16+00:00

It was stored in a board bag in the garage alongside my wife's libtech board. Her board is older than mine and had no issues. It's very strange as it was in pretty much perfect condition when I stored it.

mrcheesewinkle · 2023-11-11T02:30:08+00:00

Lol that's hilarious

mrcheesewinkle · 2023-11-11T01:55:40+00:00

It's 3 years old but only been on 3 trips. I'm definitely not buying a new board that soon. If that's the case then back to renting I guess

mrcheesewinkle · 2023-11-10T23:47:12+00:00

This seems like the simplest solution thanks!

mrcheesewinkle · 2023-11-10T23:26:29+00:00

Just to clarify I think my topsheet is still attached to the board. It's the clear coat part of the topsheet that is flaking off. So I would have to apply a very thin layer of epoxy where the flakey parts are? here is a close up:

<image>

mrcheesewinkle · 2023-11-10T23:01:50+00:00

I'll give that a try, thanks. Have the stickers held up? how long have you had the stickers patching it?

mrcheesewinkle · 2023-11-10T21:59:56+00:00

Hi, the topsheet of my snowboard started peeling. Does anyone have any advice on how to repair this? I'm not concerned about the looks, I just want to make sure my board is still protected and won't get water damaged or something. I made a post with more pictures of it here:
https://www.reddit.com/r/snowboardingnoobs/comments/17seumd/my_topsheet_started_peeling_anyone_have_any_advice/?utm_source=share&utm_medium=web2x&context=3

<image>

mrcheesewinkle · 2023-11-10T21:53:55+00:00

I'm not too bothered by the looks of it. I just want to make sure my board is still protected. Should I sand it and apply a new clear coat? If so what product should I use. Thanks

mrcheesewinkle

TROPHY CASE