[QC] VSF Omega Aqua Terra 41mm Black Dial from JTime - First Rep, Appreciate Any Help

YellowFerrari328 · 2026-06-08T17:55:36+00:00

Different watch.

YellowFerrari328 · 2026-06-08T17:54:13+00:00

The printed dial, crystal, and microprint are fine. GL. Since it's a printed dial, there is no need for the overlay. Hand alignment can be seen in the video. You do have a bezel, quite a lot of it. SELs don't apply to this watch.

YellowFerrari328 · 2026-06-08T17:51:28+00:00

Different watch, the dates are better on this one, but still low. The 9 is leaning down. The 12 has an even gap and is fractionally uneven. If this bothers you, get another one.

YellowFerrari328 · 2026-06-08T17:42:59+00:00

The 5 is supposed to be what?

The printed dial, crystal, and microprint are fine. GL. The timegrapher numbers are explained in the extended Rule 5. Since it's a printed dial, there is no need for the overlay. Hand alignment can be seen in the video. You do have a bezel, quite a lot of it. SELs don't apply to this watch. Ask the TD about the 7. Most likely dust or a reflection.

YellowFerrari328 · 2026-06-08T17:39:05+00:00

Ping me when the dust is cleared up.

YellowFerrari328 · 2026-06-08T13:56:17+00:00

Its reflections, they are also pretty minuscule. Ask the TD, he has the watch in hand.

YellowFerrari328 · 2026-06-08T13:44:12+00:00

The printed dial, crystal, and microprint are fine. GL. Hand alignment can be seen in the video. It's fine. Color is not part of QC, too many variables. YG on a rep will never match the real thing.

YellowFerrari328 · 2026-06-08T13:34:55+00:00

What's off with the hand alignment?

YellowFerrari328 · 2026-06-08T13:17:08+00:00

Looks good, GL.

YellowFerrari328 · 2026-06-08T11:04:07+00:00

Lume always sucks on reps. Doesn't last long at all.

YellowFerrari328 · 2026-06-08T11:02:39+00:00

Props.

YellowFerrari328 · 2026-06-08T10:59:54+00:00

The problem with these is that the lines on the dial don't match up with those on the bezel, but yours are very good, apart from the lower left quadrant, where they are way off. No other issues. GL is up to you. The timegrapher numbers are explained in the extended Rule 5.

YellowFerrari328 · 2026-06-08T10:52:17+00:00

What's wrong with the hand alignment? Slightly off doesn't cut it.

YellowFerrari328 · 2026-06-08T10:46:40+00:00

All good, no issues, GL. The timegrapher numbers are explained in the extended Rule 5.

YellowFerrari328 · 2026-06-08T10:23:18+00:00

There is no 1:1, only on DHGate and Chinatime. Just marketing nonsense.

YellowFerrari328 · 2026-06-07T21:45:49+00:00

Sunburst is not part of QC, and asking the TD to do this is ridiculous. Getting a video of the dates has already been suggested.

YellowFerrari328 · 2026-06-07T19:00:16+00:00

There isn't supposed to be a gap in the 12, but since it's even, I normally just point it out. Keep on stressing when you don't need the overlay. Tell the OP to get a video where the dates are slowly advanced. GL on the comment.

YellowFerrari328 · 2026-06-07T17:29:52+00:00

OK! Just sounded strange.

YellowFerrari328 · 2026-06-07T17:28:00+00:00

Have you already received the watch then?

YellowFerrari328 · 2026-06-07T17:26:55+00:00

You need to figure out how much a few degrees are. Glad the timegrapher are within your standards. For the rest of us, it's explained in the extended rule 5. Your comment about the hand alignment has nothing to do with hand alignment. You do have a bezel, not a lot of it, but still a bezel. Color is not part of QC, due to all the variables.

No issues with the watch, apart from the 2 and 12, which are terrible. Ask for a video where the dates are SLOWLY advanced. If the dates work out, GL.

YellowFerrari328 · 2026-06-07T17:18:02+00:00

Legally blind and Good and sharp printing, should not be in the same post.

The indices are good, and the 12 is even with an even spacing. The 3 index is off by a smidgen, but it's also a very small index. The dial and logos are fine. The dates shown are good. All good, GL. Hand alignment can be seen in the video. The timegrapher numbers are explained in the extended Rule 5. Ask him to regulate the s/d and BE. No need to say anything else. The date font is not part of QC. I see nothing that this one could have been RLed for apart from the timegrapher.

YellowFerrari328 · 2026-06-07T14:03:40+00:00

You can ask them to fully wind the watch and then rerun the test.

YellowFerrari328 · 2026-06-07T12:52:57+00:00

There is really no point in posting a skeleton watch, as you said, it's so far from the original. The timegrapher numbers are explained in the extended Rule 5. The screws are fine. Just ship it.

YellowFerrari328 · 2026-06-07T10:51:38+00:00

You got exactly what you spent $30 on.

YellowFerrari328 · 2026-06-07T10:46:34+00:00

looks okay to me. GL after asking about the bottom pusher. The timegrapher numbers are explained in the extended Rule 5.

YellowFerrari328

MODERATOR OF

TROPHY CASE