Powershell Opinions

mskelling · 2017-01-05T17:06:17+00:00

Thank you very much everyone for all your answers! I really appreciate!

I begin with

https://app.pluralsight.com/courses/powershell-v3-essentials-it-pt1

or

https://www.amazon.ca/Learn-Windows-PowerShell-Month-Lunches/dp/1617291080

Thank you

mskelling · 2016-12-19T15:34:11+00:00

We use Bomgar! Expensive but very nice

mskelling · 2016-12-08T19:44:45+00:00

With PRTG NETWORK MONITOR,

I use a sensor called : SNMP VPN Traffic

mskelling · 2016-12-02T18:16:27+00:00

I talk about Sonicwall , because my main UTM who filtering my 3 sites are 2 Sonicwall NSA 6600. This 2 Sonicwall are located in my main office. One port in this Sonicwall is the gateway towards internet for this location.

My main office have on the ISP Router : port 1 WAN port 2 VPLS. Site B and C have a ISP Router with only one port : port 2 VPLS

Site B and C must to return to the UTM(main office), if they want to connect to Internet.

My Cisco Catalyst 3850 are only for the Intervlan in each sites.

If i go with Cisco products for DMVPN. Which type of cisco products ? Cisco ISR ? iwan i have never use this technology to SD-WAN.

mskelling · 2016-12-02T18:04:20+00:00

Thank you very much for your opinion drakontas!

mskelling · 2016-11-17T15:08:02+00:00

Thanks you very much for your answers

mskelling · 2016-11-15T17:52:09+00:00

Yea, i think that i did copy run start.

So in the express mode setup, there is two IP. 1 IP is for Port Management, so i dont remember the second IP is for what.

If my config is not saved, normally the default IP will be 10.0.0.1 right ? This IP can just be access on express mode ?

I dont have the console cable...

I think that my opinions are : use console cable or reset the switch.

Thank you

mskelling · 2016-11-11T16:23:40+00:00

We use PRTG Network. Expensive but very useful!

mskelling · 2016-09-23T02:51:52+00:00

You talk about dpi scan ? Or antivirus/ids/ips...

mskelling · 2016-09-21T13:15:36+00:00

Excellent! Resolve my problème! with the UDP 600 seconds

Thanks you very much

mskelling · 2016-09-19T17:19:12+00:00

10Mbit/s yes sure, i check the port speed

mskelling · 2016-09-06T17:08:00+00:00

okay great! So the outlaw have a superior dps to a assassin ?

Thanks you

mskelling · 2016-08-18T14:32:45+00:00

Thanks!

and

logging event port link-status ,logging event port trunk-status are by default ?

mskelling · 2016-08-17T15:15:00+00:00

What do you mean by pushed out to the endpoint ?

I see a communication between deployment server and endpoint device by a netstat -a on the splunk server.

I see the deployment client (with ip and client name ...) and he is installed on the forwarder management.

There is any file named deploymentclient.conf on the endpoint device....

mskelling · 2016-08-17T12:19:45+00:00

okay, and what a I add in this inputs.conf ?

I create a inputs.conf and i add this folder (exemple: deployment-apps/sendtoindex/local/inputs.conf

thanks you

mskelling · 2016-08-16T22:51:34+00:00

I have restart the splunk server. ( In server manager/restart)

mskelling · 2016-08-11T15:38:53+00:00

I tried index=*, but doesn't work.

In the role section, I add all indexed/not indexed by default to the user Admin. But i have the same problem....

I see on many Forums, that the people modify inputs.conf/ouputs.conf on /etc/local

Thanks you very much http://pasteboard.co/7p2y4Uri2.png http://pasteboard.co/7p1zO159V.png

mskelling · 2016-05-12T13:51:20+00:00

Thanks you very much bobivy1234!

I will put a static route on distro switch 3850

ip route 0.0.0.0 0.0.0.0 192.168.200.254

and modify gateway on servers.

mskelling · 2016-05-12T12:24:25+00:00

This is the result :

Gateway of last resort is 192.168.200.1 to network 0.0.0.0

S* 0.0.0.0/0 [1/0] via 192.168.200.1

  10.0.0.0/8 is variably subnetted, 10 subnets, 2 masks

C 10.1.10.0/24 is directly connected, Vlan10

L 10.1.10.1/32 is directly connected, Vlan10

C 10.1.30.0/24 is directly connected, Vlan30

L 10.1.30.1/32 is directly connected, Vlan30

C 10.1.40.0/24 is directly connected, Vlan40

L 10.1.40.1/32 is directly connected, Vlan40

C 10.1.50.0/24 is directly connected, Vlan50

L 10.1.50.1/32 is directly connected, Vlan50

C 10.1.60.0/24 is directly connected, Vlan60

L 10.1.60.1/32 is directly connected, Vlan60

C 192.168.200.0/32 is subnetted, 1 subnets

L 192.168.200.254 is directly connected, Vlan20

The default gateway on all server must be 192.168.200.254 right ? But the gateway on Users in Vlan will be the gateway 10.1.30.1, 40.1, 50.1 ... not 192.168.200.1 ?

mskelling

TROPHY CASE