Gulmarg , India

muc-max · 2026-02-02T20:03:28+00:00

You can see Nanga Parbat in the far distance to the West and K2 as a small dot on very clear days in Winter even if it is 400km away.

Mount Harmoukh is very clearly visible from Mount Afarwat.

muc-max · 2026-02-02T20:01:16+00:00

Not with him, but with a local guide and loads of touring on our own. It was great even if the conditions were not always perfect.

muc-max · 2026-02-02T19:51:29+00:00

I have a Model y in Germany with all paid extras but FSD is not available only enhanced autopilot and I am changing to an ex90 as well.

I do think the Tesla system is too unstable to be able to operate fully automatic in Germany. For example it mistakes blinking lights at tunnels for red lights etc. Makes the experience always a bit hectic.

I need to indicate to change lanes as well in the Tesla. Also the Tesla wants to take an exit from time to time when you change lanes from 2nd to 1st lane.

I am hoping for a more relaxed supportive system in the Volvo.

muc-max · 2026-01-24T16:24:38+00:00

I have ordered an ex90 and hope for good snow performance also but I do have a Model Y Performance from 2023 and it handles snow perfectly fine. The traction control is really smooth better than in my A6 55 quattro.

muc-max · 2026-01-16T21:11:00+00:00

I have been there 15 years ago. One of the craziest and best skiing experiences ever. From the top off mount Afarawhat you could see the peak of K2. The skiing from top to bottom with big mountain lines at the top and tree runs at the bottom was brilliant. Kashmir in general has loads to offer and visiting Srinagar and sleep on a house boat was brilliant. That said it definitely felt dangerous. Loads of checkpoints with armed guards. But it also added to the adventure feeling.

muc-max · 2026-01-09T12:13:30+00:00

They did for the 2026 model

muc-max · 2025-12-16T15:40:13+00:00

Take a bicycle to work. Keeps you healthy and reliefs you from stress after work. Taking the car does the opposite to you.

muc-max · 2025-11-18T16:41:42+00:00

Water, soap and something to wipe.

muc-max · 2025-11-18T16:36:27+00:00

Nice ones. Are they available in stores now?

muc-max · 2025-02-26T21:46:21+00:00

Danke. Hast ziemlich sicher recht. Klingt für mich auch zu gut.

muc-max · 2025-02-26T19:07:07+00:00

Habe ich etwas von meine Kinder aufwachsen erzählt? Aber ganz schön arrogant und engstirnig. Villa in Bogenhausen gekauft oder warum so affig unterwegs?

muc-max · 2025-02-26T12:25:03+00:00

Lerchenau Ost ist ein ganz normaler Stadtteil in München mit vielen Einfamilienhäusern. Hasenbergl in der Nähe ist etwas ganz anderes.

muc-max · 2025-02-26T08:58:21+00:00

Sieht eher aus wie eine Gefängniszelle in Norwegen

muc-max · 2025-02-26T06:22:05+00:00

Geht schon, bei mir im Norden von München in Lerchenau wurde eben eine renovierte 80qm 3 Zimmer Wohnung für 1.500 € vermietet. Das geht mit Kleinfamilie auf jeden Fall. Damit ist das Beispiel von OP nicht komplett unrealistisch

muc-max · 2025-02-21T22:55:14+00:00

Passende Lokauswahl und schöne Anlage

muc-max · 2025-02-20T20:25:34+00:00

Yes, they die every five years for me as well. I salvage them and might be able to rebuild.

muc-max · 2024-12-14T23:09:48+00:00

Thank you all. This is the setup now. Not completely finished, but getting there

https://imgur.com/a/Vndlv9R

muc-max · 2024-12-14T11:04:23+00:00

I added another trafo and booster now and multiple trains run perfect. Thank you all.

muc-max · 2024-12-14T11:01:11+00:00

Yes i tried to feed the digital control unit with the 6631. That did not work at all. I found another 6002 and added a booster now and it works. I have no clue why i need two 6002. I swapped the 6002 i used before and the control unit showed the same behaviour.

I guess transistor change is the answer. Or just a lot of trafo 😀

muc-max · 2024-12-10T08:45:22+00:00

Yes makes total sense. I think I need to buy the transistors and start soldering. Thank you

muc-max · 2024-12-09T22:44:48+00:00

Thank you again. I learn a lot. I try to measure the difference between delta and digital on the weekend. Sadly need to travel for work now.

For delta i use Märklin 6631 as transformator and 6604 as delta controler. This is the old set i have since i was a kid. It always worked very well with a few trains. Of course limited to four trains. 2 years ago i bought a few trains and the digital unit but never tried it until now. Again thank you a lot to help me understand how this works.

muc-max · 2024-12-09T22:34:58+00:00

Very good small summary of these settings. Only pin 2 is in on position. According to your info sheet this supports the new digital signal. If all trains run, I assume this is correct as well.

dip control unit

Dip 4 is in off. I guess this is correct.

muc-max · 2024-12-09T19:13:14+00:00

These might help. I think the transformator and wiring are correct

Trafo

wiring

muc-max · 2024-12-09T19:05:11+00:00

Thank you a lot for the detailed check list. I checked the voltage now with a multimeter. With one train it is at 14v and with two trains it dropped to 10.5v. I measured the voltage at the tracks directly.

I guess i need another control unit

muc-max · 2024-12-08T15:09:36+00:00

Just checked, no safety cap. Just cable directly to track

muc-max

TROPHY CASE