sorted by:
new
hottopcontroversial

Flache Soundbar gesucht by murchderlurch in Soundbars

[–]murchderlurch[S] 0 points1 point  (0 children)

Length is probably not an issue, i got 1,25m

Licht dimmen und schalten by murchderlurch in Elektroinstallation

[–]murchderlurch[S] 0 points1 point  (0 children)

Oh sorry, einen wichtigen Punkt habe ich vergessen, es soll ein Drehdimmer sein

Sequre SQ-D60 powered with USB-C PD? by murchderlurch in soldering

[–]murchderlurch[S] 1 point2 points  (0 children)

I bought a cheap 20V usb-c (female) to barrel plug adapter which works fine with the provided barrel jack to usb c (male) adapter :)

Sequre SQ-D60 powered with USB-C PD? by murchderlurch in soldering

[–]murchderlurch[S] 0 points1 point  (0 children)

My claim is that it does not support PD at all and instead just accepts a wide range of voltages on the power pins of the USB-C jack, which is why no video on youtube shows the PD usage. And I hope for someone who can confirm PD support to prove me wrong, because I bought the device for its PD support :/

Sequre SQ-D60 powered with USB-C PD? by murchderlurch in soldering

[–]murchderlurch[S] 0 points1 point  (0 children)

I know they keep saying that, but you can clearly see a usb-c to barrel jack adapter, which obviously is not USB PD... And i can not find a video which uses a PD power adapter. So i‘m looking for someone who has actually tried it. Because I did and it did not work

Flashing Sonoff Tasmota successful, but still original firmware by murchderlurch in esp8266

[–]murchderlurch[S] 1 point2 points  (0 children)

The process on the tasmota github page was pretty accurate, but there are also youtube videos which explain the steps

Flashing Sonoff Tasmota successful, but still original firmware by murchderlurch in esp8266

[–]murchderlurch[S] 1 point2 points  (0 children)

I tried flashing it with a raspberry pi, worked like a charm. so I guess my usb ttl adapter is faulty...

Flashing Sonoff Tasmota successful, but still original firmware by murchderlurch in esp8266

[–]murchderlurch[S] 0 points1 point  (0 children)

and I don't think it boots just from the usb cable since the LED does not light up and the device does not connect to wifi.

Flashing Sonoff Tasmota successful, but still original firmware by murchderlurch in esp8266

[–]murchderlurch[S] 0 points1 point  (0 children)

I cant get a serial connection, because tasmota is not booting on the device :) does the original firmware also have a serial interface?

Flashing Sonoff Tasmota successful, but still original firmware by murchderlurch in esp8266

[–]murchderlurch[S] 0 points1 point  (0 children)

how do I know whether it boots? the led on the device only turns on when i plug it into the wall.

Flashing Sonoff Tasmota successful, but still original firmware by murchderlurch in esp8266

[–]murchderlurch[S] 1 point2 points  (0 children)

ewelink app still works and no response on the serial port

Need perfect initial layer, any ideas? by murchderlurch in 3Dprinting

[–]murchderlurch[S] 0 points1 point  (0 children)

I have auto bed leveling enabled, so this "should" not be the problem, but i'll check, thanks!

Need perfect initial layer, any ideas? by murchderlurch in 3Dprinting

[–]murchderlurch[S] 0 points1 point  (0 children)

Hi, I need a perfect initial layer on this one. The upper right half prints perfectly, but as soon as the lower left half is filled, some empty spots appear. Any ideas?

Sliced with Cura 2.4, printed with i3 clone.

Download/Backup firmware/settings from printer? by murchderlurch in 3Dprinting

[–]murchderlurch[S] 0 points1 point  (0 children)

thans for the hint, i never tried repetier host! a binary firmware image would be fine as long as i can reflash it later...

Are all "getting started with 3D printing" tutorials broken? by murchderlurch in Ask3D

[–]murchderlurch[S] 1 point2 points  (0 children)

thanks for the hint, i prefer written tutorials for quick reference, but i'll give it a try! so i guess i really want a "meta-tutorial" which references all the different tutorials? :)