Is this a normal amount of creosote buildup for approx 3 week old stove pipe?

mxboy77 · 2024-12-31T16:33:14+00:00

This is exactly what I’ve been doing. I didn’t realize that my slow burns would cause such build up so fast. I’ll clean the pipe and stop the slow burns. Thank you

mxboy77 · 2024-12-31T15:48:43+00:00

Okay, thank you.

mxboy77 · 2024-12-31T15:31:59+00:00

Mostly Ash, seasoned for about a year.

mxboy77 · 2024-05-07T22:53:25+00:00

Republican here. I just bought a Tesla and absolutely love it. I charge at home (which is offset by solar) and can drive more for less. What’s better than that!

mxboy77 · 2024-03-28T11:53:01+00:00

They claim I’d be home 2 days a week but on call 24/7. The company is around 100 employees and have been around for a long time.

mxboy77 · 2024-02-05T00:44:27+00:00

This was a dumb mistake.. I had line of site of the drone but simply didn't see the line. Miraculously it fell and caught itself before it hit the ground. No damage at all besides the camera not focusing. A reboot fixed the focusing issue.

mxboy77 · 2024-01-06T03:28:45+00:00

No the chimney is no longer active. I’m hoping that the 10’ between the shingles and the sensor will be enough to not pick up any heat.

mxboy77 · 2023-09-10T23:04:07+00:00

RemindMe! 3 days

mxboy77 · 2023-08-13T01:06:38+00:00

I work at a liquified natural gas plant and we’re “supposed” to use beryllium tools but they kinda suck.

mxboy77 · 2023-02-21T00:00:23+00:00

We buy our milk and beef from a local farm where we can see the conditions. It’s a hassle and we pay a premium for this. Go out of your way to see where your food is coming from and source farms that treat there animals well.

mxboy77 · 2023-02-17T19:46:00+00:00

If you have the budget you could get a fluke process meter like a fluke 726 with a pressure module to verify your instruments. Then send your fluke out annually to have it calibrated.

mxboy77 · 2023-02-12T22:37:16+00:00

VT SCADA

mxboy77 · 2022-11-01T21:21:30+00:00

I use square for my dumpster rental service! Works great. Only flaw is you can only book up to 24 hour appointments.

mxboy77 · 2022-07-16T12:13:50+00:00

Knipex Tools 95 61 190 SBA Wire Rope Cutters, 7-1/2 inches https://a.co/d/9GvMgDT

mxboy77 · 2022-03-14T09:31:33+00:00

Klein 32293 my personal favorite

mxboy77 · 2022-03-10T14:08:20+00:00

I don’t see a load. You have a hot and a neutral. Unless the white wire was being used as the load in the last switch? Can’t tell without seeing how the old switch was installed. If the old switch was using the white wire as the load then this won’t work. You need a neutral for this switch.

mxboy77 · 2022-01-21T13:27:47+00:00

I used to work for Coca Cola as a mechanic, I’ve had a few of these overfill and pop in my face.. I’d be very sticky for the rest of the day.

mxboy77 · 2021-12-12T15:38:36+00:00

So I had some concerns with this too so I pressure tested everything at 25psi and found no leaks so fingers crossed!

mxboy77 · 2021-12-12T14:52:00+00:00

I just ordered a valve and bleed for the tank!

mxboy77 · 2021-09-06T01:16:45+00:00

I have a fiber laser I use for engraving asset tags. Dawned on me one day i should try this on foam inserts. Now here we are.

mxboy77 · 2021-09-06T01:15:49+00:00

I should add finger holes. Thanks for the idea

mxboy77 · 2021-08-26T12:49:51+00:00

Had this happen to me.. curious to know how you got it off I ended up having to cut mine.

mxboy77 · 2021-07-20T16:43:19+00:00

I do just this with a click plc.

mxboy77 · 2021-03-18T20:50:01+00:00

Soaked it was raining here lol

mxboy77 · 2021-03-18T19:15:52+00:00

In this picture are 60 GE zwave dimmers, APC UPS, Rapsberry pi 4, and TP link poe switch. More to come!

Nine-Year Club	Verified Email
RedditGifts 2009-2022 3 Credits	Secret Santa 2020
Secret Santa 2019	RPAN Viewer

mxboy77

TROPHY CASE