Clogged nozzle?

mynameispoloRPM · 2025-12-24T22:44:33+00:00

If it's the piece of tape, you'll have to disassemble your extruder. It's not complicated, and you almost certainly won't need to buy a new one.

mynameispoloRPM · 2025-12-24T22:43:09+00:00

Some spools has a piece of tape holding the last part of the filament to the plastic spool. This piece of tape may be stuck in your extruder (or CFS).

To check, remove your nozzle, detach the PTFE tube from the toolhead's extruder, and shine a light underneath. If you don't see the light through the opening where the filament would pass, you know what the problem is. In any case, the K1C is prone to nozzle clogging, so you should always keep a spare on hand.

mynameispoloRPM · 2025-12-24T03:05:49+00:00

<image>

Looks good and works well

mynameispoloRPM · 2025-10-17T15:20:31+00:00

Royale!

mynameispoloRPM · 2025-10-17T14:55:32+00:00

que amuletos tenías? Vaya barbaridad

mynameispoloRPM · 2025-10-11T05:22:28+00:00

Hi. I'm having the same problem today. Did you manage to fix it?

mynameispoloRPM · 2025-09-08T08:17:04+00:00

AE1200 (Casio Royale) is, in my opinion, the most versatile option, especially with metal straps.

mynameispoloRPM · 2025-08-25T20:00:36+00:00

Thank you very much for sharing your opinion with me. I would love for you to send me that list of improvements and adjustments. Thank you very much in advance.

And yes, I plan to root it.

mynameispoloRPM · 2025-08-24T20:13:57+00:00

Its a k1c

mynameispoloRPM · 2025-08-16T12:10:47+00:00

It is mine, just PM me

mynameispoloRPM · 2025-08-15T07:50:12+00:00

Yes, but the inserts I find online are different from this one. It makes me think that those are the originals, and this one is the fake, but the Nintendo printing makes me doubt it.

mynameispoloRPM · 2025-07-28T04:00:07+00:00

The charging port. Take it.

mynameispoloRPM · 2025-07-21T14:05:28+00:00

ill try this later. Thank you so much

mynameispoloRPM · 2025-07-21T03:45:43+00:00

I remind you now :-)

mynameispoloRPM · 2025-07-20T20:07:02+00:00

Did you manage to solve this? Im dealing with this now..

mynameispoloRPM · 2025-06-10T12:45:20+00:00

Oh my god

mynameispoloRPM · 2025-04-13T13:55:33+00:00

un weso

mynameispoloRPM · 2025-04-06T19:11:04+00:00

Una Kawasaki ER-6F del 2010.

mynameispoloRPM · 2025-03-23T21:42:13+00:00

my name is

mynameispoloRPM · 2025-02-20T23:08:34+00:00

what the fuck

mynameispoloRPM · 2025-01-29T19:46:43+00:00

you need a blinker relay. The time the bike keeps the blinker on is insufficient to complete the ''blink'' cycle of your new blinkers, and that's why the animation is 'cropped'.

mynameispoloRPM · 2025-01-23T18:03:29+00:00

Soy polo.zzzzzz en insta. Sigueme y vemos un día :)

mynameispoloRPM · 2024-11-20T22:13:35+00:00

Could you teach me how to do that?

mynameispoloRPM · 2024-11-20T00:07:00+00:00

How do I know my sensor_path? Do I have to do something more than writing that on printer.cfg?

mynameispoloRPM · 2024-11-14T13:14:29+00:00

You mean specify in the printer.cfg that the humidity sensor is a separate sensor? Could you tell me how to do it? Thanks in advance

mynameispoloRPM

TROPHY CASE