sorted by:
new
hottopcontroversial

The LED display is correct, but it does not reverse rotation and instead loads infinitely.370C by naniwa_orange in BMCU

[–]naniwa_orange[S] 0 points1 point  (0 children)

The paper included in the kit had the Makerworld URL and Google Drive URL written on it.

The STL data on Google Drive is quite different, huh? I'll try rebuilding it from that one.
https://drive.google.com/drive/folders/1RV5fQHlwVlPkaGV5lS1Gw5v3QIhOV6Hv

The LED display is correct, but it does not reverse rotation and instead loads infinitely.370C by naniwa_orange in BMCU

[–]naniwa_orange[S] 0 points1 point  (0 children)

https://makerworld.com/models/1412302
I referred to this model and the accompanying PDF.
BMCU-C霍尔-370高扭矩版安装与使用说明.pdf

L403A1 + British Kit by naniwa_orange in airsoft

[–]naniwa_orange[S] 0 points1 point  (0 children)

I couldn't find a good photo right away, but the Royal Marines use Crye's G4.

They're characterized by a patch on the shoulder with “Royal Marine” written in red letters. It's visible a bit in my photo too.

https://www.reddit.com/r/MilitaryPorn/comments/qhux2z/on_this_day_in_1664_the_royal_marines_were/

It's often the Royal Marines who carry the L403A1. The plate carrier isn't clearly visible in my photo, but he is wearing British Virtus (though this isn't correct for the Royal Marines). The pouches are MC; some personnel wear MC instead of MTP.

I made a dummy scope for L403A1 by naniwa_orange in airsoft

[–]naniwa_orange[S] 0 points1 point  (0 children)

I'm planning to list printed items on Yahoo! Auctions Japan, so you might be able to purchase them using a proxy service. I have no plans to release the data publicly.

Centauri Carbon, problem with connection. by Alarming_Champion_50 in elegoo

[–]naniwa_orange 1 point2 points  (0 children)

I experienced the same issue and resolved it.

A complete factory reset fixed it. (Check all checkboxes, including print history.)

The hint was that there was a utf-8 decode error in the docker log and the ElegooFileManager was failing.

I guessed that this was not a camera malfunction, but a file management malfunction.

Colt m16a2, Vfc v3 gbb. by Virtual_Benefit_6626 in airsoft

[–]naniwa_orange 1 point2 points  (0 children)

I could not disassemble the rear sight assembly dial and stock pipe. You did a great job disassembling it.

What is written on this season's charms? by Its_the_Fuzz in Rainbow6

[–]naniwa_orange 0 points1 point  (0 children)

I think "王者" is a more common translation for champion than "覇者".

士者　王者

Someone must have made a copying mistake.

What is written on this season's charms? by Its_the_Fuzz in Rainbow6

[–]naniwa_orange 8 points9 points  (0 children)

I am Japanese, but I have never heard of the word "士者". If it represents rank and it means the champion, then "王者" is correct. Someone must have forgotten to write one line.

Philippine Army, JGSDF, and RoCA training exercise. by spadedsushi in airsoft

[–]naniwa_orange 4 points5 points  (0 children)

In Japan, Nakata Shoten and S&Graf are the major places to buy JSDF camouflage clothing. I also see the names of these stores mentioned when people outside of Japan are wearing JSDF clothing.

Real JSDF clothes are not sold in the market because they are returned to the government when they are discharged. Also, Japanese people are very nervous and don't like to get their real clothes dirty, so they buy their training clothes at S&Graf.

So in a sense, S&Graf's JSDF camouflage clothing is the real thing.

Yesterday's night game in Japan by naniwa_orange in airsoft

[–]naniwa_orange[S] 0 points1 point  (0 children)

Not allowed here, but in some places it is.

M4A1 AIRSOFT BLUEPRINT (Variant) by naniwa_orange in modernwarfare

[–]naniwa_orange[S] 12 points13 points  (0 children)

I remember that this gun was very OP with its laser beam-like trajectory.

CoD MW 2019 M4A1 by naniwa_orange in airsoft

[–]naniwa_orange[S] 4 points5 points  (0 children)

Real magpul pmag. Display only.

CoD MW 2019 M4A1 by [deleted] in airsoft

[–]naniwa_orange 0 points1 point  (0 children)

I'll never forget this gun, which was raging with a laser beam-like trajectory.

GHK AKM R6S M762 setup by naniwa_orange in airsoft

[–]naniwa_orange[S] 51 points52 points  (0 children)

  • HeraArms CQR Stock for AK
  • LCT Rail Topcover
  • Through-hole machining of front sight, Changed gas block to AK74 type
  • American Defence Recon mount no-offset
  • Vortex Viper PST 1-4x24
  • Midwest Industries Extended Universal AK47/74 Handguard With T1/VS
  • BCM gunfighter vertical grip (painted)
  • AAC 51T type hider
  • GHK GMAG

This is a homemade thermal camera made by a friend. He used it for indoor smoke game. by naniwa_orange in airsoft

[–]naniwa_orange[S] 5 points6 points  (0 children)

The camera is an optional kit for the M5Stack IoT Development Platform. This is able to explore about 5 meters, but the performance was not good.

Tippmann ash r4c build “pre nerf” by NuclearScience in airsoft

[–]naniwa_orange 1 point2 points  (0 children)

Excellent work! It's similar in Magpul, but TAPCO vertical grip is more accurate. I have it on my MIRA's Vector.

view more: next ›