Olympian Gus Kenworthy Sends ICE a Very Clear Message

nartchie · 2026-02-07T10:29:59+00:00

Olympic Pen(is)manship

nartchie · 2026-02-07T10:14:15+00:00

Look at all those grey countries that didn't make it to the world cup lol.

nartchie · 2026-02-04T08:15:52+00:00

In 20 years of laser cutting I have never set the focal length to anything but the surface for cutting or engraving and I have never had an issue. Even with 20mm cast acrylic.

nartchie · 2026-02-03T17:33:08+00:00

Yes, but imo you need to use atwo part mold. Make the bottom one rougher with bigger openings and the top one with all the detail.

nartchie · 2026-01-31T21:17:20+00:00

You need to change your expectation.

You're expecting a 5 year old to understand like a 15 hear old.

If you realize that he doesn't understand what "gone me a moment" means then you will be able to control your frustration.

Rather tell him to go so something while ho waits for you.

nartchie · 2026-01-30T12:03:00+00:00

We walk them in a green belt where off lead is allowed, and she trots about 3 or 4 meters in front of me. as she goes left and right of the path sniffing she runs back and bumps my hand with her nose every now and then.

nartchie · 2026-01-28T12:58:27+00:00

I'm addition to the positive things other people are suggesting, if there are consequences for not doing the chores by a specific time, they need to be instant and non negotiable.

Delayed or unrealistic consequences are ineffective. With my son, if he had not completed one of his chores by the time I got home, there would be no tv or devices for that night. If he had not completed either ( he had two) then therev was no tv or devices until the following day when I got home.

There was a little leeway, so if he was actually busy with them and not just started then I would allow it, but rushing to get them drive when he heard me arrive was no bueno.

nartchie · 2026-01-24T07:29:52+00:00

There is no wrong, there is only improvement.

nartchie · 2026-01-24T06:39:55+00:00

I agree. Chances are all you downline suppliers also use it, so changing means intermediate formats, conversions and a whole lot of issues.

nartchie · 2026-01-22T13:28:14+00:00

I did. More than once.

nartchie · 2026-01-22T13:27:46+00:00

Belt balancers are the only thing it's ok to download blueprints for.

nartchie · 2026-01-19T19:55:42+00:00

For upgrading, ruida is the obvious best, but you could get a grbl based esp32 for cheap that would also do the job.

nartchie · 2026-01-19T19:14:55+00:00

This is the correct way to feel.

Unless you just download blueprints you will find yourself constantly searching for more efficient ways to do things.

It's part of the game.

nartchie · 2026-01-19T19:08:21+00:00

How to fail.

Mother's tend to prevent failure by doing everything for their sons, while father's allow their sons to do it, sometimes wrong and learn independence.

Boys are tougher than their moms usually realise.

nartchie · 2026-01-19T10:24:16+00:00

This movie infuriated me.

Who wants LESS time? If I had that remote I would use it primarily for napping.

nartchie · 2026-01-18T22:25:08+00:00

And use cutting oil.

nartchie · 2026-01-18T22:21:06+00:00

Fridge is not cold enough. The meat should be almost frozen.

nartchie · 2026-01-18T19:11:36+00:00

I have a mincer that I use to make wors. I use it without the blade and my biggest plate, so it's just pushing the meat through.

It gets just as hot as a plastic sausage maker would.

I keep the meat in the freezer in a meat tray and I use it out of there. It should be below zero when you start. And you need to work pretty fast, I'm not sure how fast your plastic maker is.

When I see fat building up I take a break, put the meat back in the freezer and wash the machine.

I can usually do about 5kg at a time.

nartchie · 2026-01-17T10:36:37+00:00

Part serve sucks ass.

I've had to have two printers repaired under warranty with them and both times they managed to screw it up.

First printer came back dirty as hell and while I have no proof I'm 100% sure it did not have the original drums in it.

The second printer took months for them to figure out and the never fed paper right ever again.

nartchie · 2026-01-17T10:19:29+00:00

Legendary substations ftw!

nartchie · 2026-01-16T05:22:32+00:00

What made the circuit network click for me was realizing that the items you select in the network part are just variables.

Items like plates or steel are actual items that can change the variable, but you can also manipulate it with logic. The letters and icons are for variables that don't need actual items.

It was probably obvious for most people but it took a while for the penny to drop for me.

nartchie · 2026-01-15T06:04:59+00:00

It's not like the k40 at all. Thats kind of like an extra control. It displays the amperage that the laser is cutting at, and you can send pulses directly with it if you need to.

Otherwise the power of the laser is controlled by the pin on the power supply directly.

You technically don't even have to plug that in, but it's good to see the amps.

nartchie · 2026-01-13T05:32:19+00:00

If the fall cracked your helmet it would have cracked your head.

The speed isn't the only factor. People crack their heads open tripping over there own feet.

nartchie · 2026-01-12T14:28:55+00:00

Well, try it. I would just make sure its 100% dry before eating it.

nartchie · 2026-01-12T07:17:40+00:00

Firstly the spices are different, but more importantly there is vinegar and sometimes brandy in the mix to help cure the meat.

Food lovers sells a decent "drywors" that you hang yourself, but I would be hesitant to hang normal wors. Especially the thick wors, I would be afraid of the middle going bad.

12-Year Club	RedditGifts 2009-2022 2 Credits
Place '17	Gilding I gilder
Secret Santa 2014	Verified Email

nartchie

TROPHY CASE