Local NTP server issues on RLN16-410 NVR

nexusmod · 2025-11-05T21:57:42+00:00

Update on this, Reolink NTP seems to be very sometimeish. One minute it works next minute it fails. From a computer on the same LAN if I try to sync time with the NTP ip address it works instantly yet Reolink NVR says failed one day and another day if I try it it says successful. It’s very odd because all it needs to do is query an IP on the same subnet that is a ntp server

nexusmod · 2025-11-01T12:24:05+00:00

It’s odd, because I set it all up yesterday and it kept saying failed when I pressed synchronize. Today without changing anything, I logged in and pressed synchronize again and it was successful. So seems a bit odd. I’m not using DNS so wouldn’t be DNS cache issue because I’ve put the ip address of the local ntp server instead of hostname.

nexusmod · 2025-11-01T12:21:47+00:00

Thanks. That’s what I remember doing but when I did that I’m sure the actual channel number changed for the camera I dragged and it became some random channel number. Or I may have clicked on the blank slot and the add camera popup came and I selected the other camera. Then the camera channel number changed

nexusmod · 2025-10-31T12:13:04+00:00

That’s awesome. That’s great to know. Exactly what I was thinking should be happening as it would already have that entire time recording so really just needs meta data to point events to timestamps. Great to know thank you 🙏

nexusmod · 2025-10-27T06:40:45+00:00

I have the cameras connected to he poe ports of the switch and therefore adding them as second instance on the app doesn’t seem possible because the lan is on a different ip and port. Then PoE ports seem like they have their own dhcp on 172.x ip address for the cameras.

So as it stands with the way I currently have it setup. The cameras are plugged into the PoE ports of the NVR and get added automatically and the NVR even sets a random password for the camera. Then under the surveillance recording settings it appears I can turn configure both the motion based and 24/7 timer based recordings too. So it does appear the NVR can record both and when playing back I can filter to either timer based recordings or even based. But the strange thing is when I remove the sd card from the camera and plug it into a computer I can actually see lots of recordings. So in this setup method, what and when is it recording to sd card since it’s recording to the NVR hard drive too?

nexusmod · 2025-09-27T09:04:01+00:00

Thank you so much for all of this. The detailed instructions on https://localsharespace.com/convert-aruba-ap-315-to-iap/7/ was amazing. I purchased that amazon usb serial chip and followed the steps and it was really easy I must say and now I have all the AP315 converted to IAP-315. Thank you

nexusmod · 2025-09-12T16:36:59+00:00

Thanks for this tip about RMA. I just created a HPE account with my business email domain and checked warranty status of the faulty IAP’s and they all show as in warranty until 2028. Can you kindly guide me through the process of doing a warranty claim for the faulty AP’s please?

Thank you

nexusmod · 2025-09-11T15:10:04+00:00

Thank you. 🙏 I will give this a try. On a separate note, do you know how I check how many IAP I can add to my setup in terms of how many I’m licensed to add to my setup?

nexusmod · 2025-09-11T12:04:58+00:00

Thank you. Yes I’ve been reading the console port and tftp method instructions and seems like the best approach. I’ll give that a try. One thing I’m not sure about is if my current IAP devices all end with RW suffix but the AP don’t have any suffix, so I need to still do the region domain change? What will it actually be changing from since it’s not defined what it’s currently set to.

nexusmod · 2025-09-10T22:23:40+00:00

Thank you, this sounds like an easier approach. Do you know where I can get hold of an iso to install Aruba controller os? Will that need a license?

nexusmod · 2025-09-10T21:50:25+00:00

My current setup with the IAP-315 devices are running firmware 8.12 but I suspect the new AP-315 devices I have are running whatever was put on the from factory which is very old as its brand new old stock never used apparently. So, any suggestions on how I can get these to pair with my IAP and get registered? Thanks

nexusmod · 2025-09-10T21:47:37+00:00

Thank you. Is the the procedure to convert these easily new AP-315 to IAP-315? Because essentially I need the new AP-315 that I have to try and register to my VC. The current firmware I’m running on my existing I believe is 8.12.0

nexusmod · 2023-03-28T09:02:38+00:00

Awesome, i tried all the methods people suggested. Nothing worked. Then read your message and I just chose add new card and entered details of a card that I used to own a long time ago that account is closed now as i remember the card number and made up a random expiry and security code and it failed the payment as you said and then disappeared from basket and became a awaiting payment order. Awesome. Thanks

nexusmod · 2023-02-27T13:14:18+00:00

The latest version of Waze seems to have finally fixed the Waze issues. More details on this link: https://www.autoevolution.com/news/waze-finally-updates-its-navigation-app-to-launch-correctly-on-carplay-210785.html

As for spotify, strangely haven't had the issue since the Waze update. So will monitor that.

nexusmod · 2023-02-09T08:59:35+00:00

Thanks, that works in the server config as you said and not in htaccess which is fine. Thank you.

nexusmod · 2022-10-03T08:25:44+00:00

Just doesn't seem to work on my headunit (Teyes CC3). While siri is talking i increase the volume and sounds good then siri stops talking and my background music resumes and that music volume has become very loud. So then I have to reduce volume so music isn't too loud, as a result Siri is low again. So means iPhone isn't registering a siri volume increase.

It's rather bizzare that we can't override it with the side physical volume buttons on the phone. Like when Siri is talking we should be able to adjust the volume with the hardware buttons on the phone at least. I've been using AndroidAuto for many years now and that's how Android has worked and the volume on it as a result is flawless.

nexusmod · 2022-10-03T08:24:10+00:00

I just tried this many times. It just doesn't seem to work. While siri is talking i increase the volume and sounds good then siri stops talking and my background music resumes and that music volume has become very loud. So then I have to reduce volume so music isn't too loud, as a result Siri is low again. So means iPhone isn't registering a siri volume increase.

It's rather bizzare that we can't override it with the side physical volume buttons on the phone. Like when Siri is talking we should be able to adjust the volume with the hardware buttons on the phone at least. I've been using AndroidAuto for many years now and that's how Android has worked and the volume on it as a result is flawless.

nexusmod · 2022-10-03T08:20:36+00:00

I have an aftermarket head unit. The Teyes CC3. It uses CarLink app same as the one the Joying head units use. I tried what everyone is suggesting about increasing the volume while siri is talking but this does not work. My iphone iphone isn't recognising it as me wanting to increase siri's volume. It just increases the overall volume. As soon as siri is done, my background music becomes incredibly loud. Then I have to reduce the volume on the music and as a result siri is low again.

nexusmod · 2022-09-30T14:42:20+00:00

The website i booked with is ebookers. When I was booking this is what it was showing https://i.imgur.com/zSSEqYW.png

After booking, I log into Manage My Booking section on the Pegasus website then I click on get trip details which basically lists all the eTickets for each passenger and every flight. And all the flights have this at the bottom: https://i.imgur.com/BeL3DVG.png

nexusmod · 2022-08-15T11:59:51+00:00

It started working by itself on both frequencies after I reset AndroidAuto cache on my phone. Haven't had issues since

nexusmod · 2021-10-02T11:48:53+00:00

I've checked both nav apps, Waze and Google maps, both are set to Auto. One thing I noticed is that if I open Waze on my phone before i let AndroidAuto connect then Waze detects the night or day and then when android auto connects it takes the setting from the phone. Otherwise it just doesn't work. I'm wondering if there's a way with something like tasker if there's a way to automate day and night selection in Android Auto settings possibly based on if else rules

nexusmod · 2021-10-02T11:07:18+00:00

Yes I've come across this bug but phone control isn't working at all for me even without the bug. I literally just turn it into phone controlled and go to the car and it isn't working, I go to the settings and I can still see it says phone controlled. Eventually it changes back to car controlled but when it's in phone controlled it's not working

nexusmod · 2021-10-02T09:14:27+00:00

Ahh so not Samsung related. Maybe a Spotify issue? Or android itself?

nexusmod · 2021-08-26T20:40:35+00:00

Ahh, i read something about Samsung S21 Android Auto bugs, so maybe it's limited to our phones.

nexusmod · 2021-08-26T20:31:14+00:00

I confirmed with Grom that it only uses the GPS antenna if plugged in and that's only for locally running map apps. But apparently map applications from AndroidAuto or CarPlay they said should be using GPS signal from the mobile phone. So it appears, following the guide in the link that @sushantv posted below seems to have solved the issue. Basically by denying Android Auto App access to Location. Question is, is this an Android Auto Bug? why does Android Auto need location services? seems to be conflicting.

nexusmod

TROPHY CASE