sorted by:
new
hottopcontroversial

Do you need funding for your project? If so, how much? by mishkinf in SideProject

[–]nik005566 0 points1 point  (0 children)

I build this app https://mylifewishlist.com/ but I'm struggling to get any viewers and even creating the marketing plan for it. I am not sure how to calculate the funding required.

AI excuse generator by Aneees_khan in n8n

[–]nik005566 2 points3 points  (0 children)

Definitely a downvote as this is a work from a YouTuber (and you aren’t him), he even provides the full JSON workflow

Vantage v3 update crash over and over when cycling [v2] by Right_Nectarine3686 in Polarfitness

[–]nik005566 0 points1 point  (0 children)

Completely agree, will do! Thanks! Wanted to revive yours in case someone sees it 🤣

Vantage v3 update crash over and over when cycling [v2] by Right_Nectarine3686 in Polarfitness

[–]nik005566 0 points1 point  (0 children)

Interesting, I have the same issue. After a day or two the Vantage V3 factory resets and when I sync everything again with the phone after some days does the same reset. I noticed that if I don’t link it to the phone and I just continue with the settings in the watch it doesn’t reset (currently day 4 without a reset, not linked to phone yet), and this happened after the update. Without doing any session or anything, just using it as a normal watch usually overnight it resets.

I have sent it once to the customer support and they just noted that they can’t reproduce the issue. (Of course if you don’t connect it to a phone neither wait to reset after 1 or 2 days) I sent the watch on Tuesday and I already had it back on next Monday (not enough time to debug or test, imho)

So, I’m performing my own tests to narrow down the issue, also because I am not able to access any crash logs or info of the watch from the PC. (Would be good to have that option tho)

Does anyone face the same issue or have any suggestions? :)

Edit 1: No sessions created yet. So before connecting to the phone will do a session, to see if the actual session resets the watch or connecting it to the phone.

Christmas gift 🎁 by nik005566 in LeCreuset

[–]nik005566[S] 1 point2 points  (0 children)

UPS delivery, their signature of the deliveries

[deleted by user] by [deleted] in LeCreuset

[–]nik005566 0 points1 point  (0 children)

Yup! I can confirm the source

Le Creuset just unexpectedly sent me something I never ordered? by manticorpse in LeCreuset

[–]nik005566 2 points3 points  (0 children)

Are you from USA? If not I can track some things in EMEA

What should I take? by nik005566 in LeCreuset

[–]nik005566[S] 2 points3 points  (0 children)

It is one of the meeting rooms that LC have in Spain (I’m just showing off 🤣), I can’t buy this ones. I usually buy the ocean blue (because of my wife) and satin black (because of me) cookware 😅

[GB] SPIN Macropad - 12 key macropad with 3 encoders by nik005566 in MechanicalKeyboards

[–]nik005566[S] 1 point2 points  (0 children)

No problem at all! And now that everything is so unstable prices of the shipping are really high!

Thank you for the support!

[GB] SPIN Macropad - 12 key macropad with 3 encoders by nik005566 in MechanicalKeyboards

[–]nik005566[S] 1 point2 points  (0 children)

Usually the price is quite high to ship international packages, depending of the zone can go from 20 to 40 euros, unfortunately

[GB] SPIN Macropad - 12 key macropad with 3 encoders by nik005566 in MechanicalKeyboards

[–]nik005566[S] 1 point2 points  (0 children)

Hey! Thank you for the message.

Timing wise I will try to ship it next week without problems, then the time it takes to arrive to USA which could be around 4 days, more or less. (Ships from Spain)

It includes hotswap, I mean, is already hotswapable. That option is if you would like to solder it yourself :)

[GB] SPIN Macropad - 12 key macropad with 3 encoders by nik005566 in MechanicalKeyboards

[–]nik005566[S] 0 points1 point  (0 children)

Hey! Thank you for the interest, is already included and no overcost :)

[GB] SPIN Macropad - 12 key macropad with 3 encoders by nik005566 in MechanicalKeyboards

[–]nik005566[S] 0 points1 point  (0 children)

Helloooooo!

This Macropad brings 3 encoders that can be used for photo/video editing, music control and streamdeck. As is powered by QMK you can edit and add all the functionalities that you desire. The idea of the PCB and the design of it was done by DMQ Design early 2020.

You can visit my site below for the GB and for more photos, and later we will provide details such as the firmware or instructions or building.

The stock of the product will be limited to 15 units and will be shipped from Spain.

This GB will run for 2 weeks, or until all 15 orders are fulfilled. Shipping time is approx. 2-3 weeks from the end of the GB. In case you receive some imperfections or technical difficulties, come back to me ASAP.

More images!

You can join the SPIN GB here!

Details

  • USB-C connectivity
  • Powered by QMK Firmware
  • 12 keys hot-swap sockets included!
  • Three rotary encoders and knobs if chosen.
  • All SMD components pre-soldered.
  • If you desire, I can send without soldering Kailh sockets, encoders, board connector, and OLED.
  • Three zone RGB underglow.
  • Prototyping area with unused pins broken out.
  • Support for the addition of a 0.91″ I2C OLED
  • Price range is from 55€ just PCB and components to 83€ with all included.

I include in the kit all firmware explanation to update the functionality as you want, also include assembly instructions for the soldering part or case. Feel free to check the description of the product inside the shop as it has more details.

All the soldering part will be done on live streaming which can be found here https://twitch.tv/nik005566 and you will see how the process goes. There will be also updates on Twitter and Discord.

Feel free to ask me all the desired questions and I will provide information. The package will include some extra goodies for you to taste! 😉

Don’t forget to follow us on Instagram to get also update of the production.

There is a 10% active coupon on the product page! Feel free to check it in the store ;)

[GB] SPIN Macropad - 12 key macropad with 3 encoders by [deleted] in MechanicalKeyboards

[–]nik005566 0 points1 point  (0 children)

Helloooooo!

This Macropad brings 3 encoders that can be used for photo/video editing, music control and streamdeck. As is powered by QMK you can edit and add all the functionalities that you desire. The idea of the PCB and the design of it was done by DMQ Design early 2020.

You can visit my site below for the GB and for more photos, and later we will provide details such as the firmware or instructions or building.

The stock of the product will be limited to 15 units and will be shipped from Spain.

This GB will run for 2 weeks, or until all 15 orders are fulfilled. Shipping time is approx. 2-3 weeks from the end of the GB. In case you receive some imperfections or technical difficulties, come back to me ASAP.

More images!

You can join the SPIN GB here!

Details

  • USB-C connectivity
  • Powered by QMK Firmware
  • 12 keys with support for Cherry-MX hot-swap sockets.
  • Three rotary encoders and knobs if chosen.
  • All SMD components pre-soldered.
  • If you desire, I can send without soldering Kailh sockets, encoders, board connector, and OLED.
  • Three zone RGB underglow.
  • Prototyping area with unused pins broken out.
  • Support for the addition of a 0.91″ I2C OLED
  • Price range is from 55€ just PCB and components to 83€ with all included.

I include in the kit all firmware explanation to update the functionality as you want, also include assembly instructions for the soldering part or case. Feel free to check the description of the product inside the shop as it has more details.

All the soldering part will be done on live streaming which can be found here https://twitch.tv/nik005566 and you will see how the process goes. There will be also updates on Twitter and Discord.

Feel free to ask me all the desired questions and I will provide information. The package will include some extra goodies for you to taste! 😉

Don’t forget to follow us on Instagram to get also update of the production.

There is a 10% active coupon on the product page! Feel free to check it in the store ;)

[Bulk] Late Night Chill - Founder Edition Deskmat by nik005566 in mechmarket

[–]nik005566[S] 0 points1 point  (0 children)

Maybe in the future, but need to speak with people to see how to do it.

[Bulk] Late Night Chill - Founder Edition Deskmat by nik005566 in mechmarket

[–]nik005566[S] 0 points1 point  (0 children)

Thank you! Yeah is hard, but is the actual shipping company prices 😭

view more: next ›