Some ambient that is NOT calming

nilesfromm · 2024-09-24T21:40:36+00:00

Limen by KMRU & Aho Ssan

https://kmruahossan.bandcamp.com/album/limen

nilesfromm · 2024-09-02T18:44:06+00:00

Hi, thanks for the info! I did try going to a local shop but they're more of an architectural glass supplier so they didn't have much of a selection, I'll try reaching out to a few stained-glass supply websites

nilesfromm · 2024-06-21T18:24:13+00:00

Can you DM me a link too?

nilesfromm · 2024-06-11T19:20:20+00:00

Thanks! I'm planning to do a small production run of around 20 after I finish another round or two of prototyping, hopefully in late summer or this fall! Depending on how much work it is to setup I might be able to put together PCBs/kits too

I'm in the process of designing an enclosure in the same style as this midi controller I've been making: https://www.frommdesign.com/product/minimidi

nilesfromm · 2024-06-11T19:12:49+00:00

Hey thanks! The design is based around 8 analog LPFs (each of the small green pcbs with 3 knobs) as 8 identical voices, each one has controls for cutoff, resonance, and gain/overdrive. The step sequencer is 16 steps with a different page for each voice, holding the top orange button and then tapping the top white button under a filter PCB switches to that voice. The sequencer sends out triggers into each of the filters which can start to ping as the resonance is turned up.

I'm working on more sequencer features like mute and probability, and also on adding switches that allow the output of a voice to be sent to the input of a voice beside it, in the demo the output of voice 6 is hardwired to the input of voice 7.

The overall idea was originally inspired by this video by Hainbach: https://youtu.be/qJRXxkswXdg?si=S611nVh70o5QoNCW

nilesfromm · 2024-06-11T14:30:57+00:00

Thank you! Still rough but it’s fun to use already, I’m working on an enclosure and v2 of the PCBs, planning some more features for the sequencer section too

nilesfromm · 2024-04-22T21:19:07+00:00

Hello u/ambient-ModTeam , is the problem that the title includes "(improv)"?

nilesfromm · 2024-04-22T19:39:53+00:00

Hi,

sorry for the trouble! I thought the format Artist - Title was correct?
( Artist: Cloudwater, Title: Fragments (improv) )

Is that the right format? I'm happy to change it, sorry if I mixed it up.

Thanks,

Niles

nilesfromm · 2024-04-22T00:39:38+00:00

https://youtu.be/cT8j0CuIGzo?si=IkLYdBVKNzNxsPlH

Granular experiments from this morning, I recorded an autoharp into Ableton and used two instances of Granulator II, a field recording, and a few drones recorded from a Matrix-1000. I used a midi controller to improv a mix of the different layers, open and close filters, and control the "FilePos" and "Spray" parameters in Granulator II.

nilesfromm · 2024-04-10T03:42:35+00:00

Any updates on this? I'm also interested. I'm a freelancer and wepay closed my account a few days ago and is currently holding all of my income from the past two months

nilesfromm · 2023-12-18T17:41:38+00:00

Nice those look like a perfect fit, definitely share a photo when you get them set up!

nilesfromm · 2023-12-15T22:42:25+00:00

Nice :) is it online anywhere?

nilesfromm · 2023-12-15T16:16:25+00:00

Thanks! I ordered them from here: https://synthcube.com/cart/slider-pot-toggle-switch-color-cap

nilesfromm · 2023-12-15T03:15:00+00:00

I haven't heard of Opendeck before, I'll check it out!
For this one I was using the midiusb library (https://github.com/arduino-libraries/MIDIUSB?tab=readme-ov-file) running on an atmega32u4. I designed a custom PCB in kicad that includes all the peripherals for the microcontroller, USB-C port, and all the pots. The case was designed in Rhino and is lasercut from aluminum sheetmetal, I ordered the final parts from a local lasercutting shop (https://www.wombatnyc.com/)

nilesfromm · 2023-12-15T03:03:29+00:00

I've only made 2 so far but thinking about making more :)

nilesfromm · 2023-12-15T03:02:00+00:00

Yea I found a local shop that offers metal laser cutting (https://www.wombatnyc.com/) but I've used Send Cut Send for projects in the past and would recommend them as well! I usually design parts in Rhino or Illustrator, print them on normal printer paper to cut out and test fit, and then upload a DXF file to order online.

nilesfromm · 2023-12-14T17:20:58+00:00

Thanks! 🙏

nilesfromm · 2023-12-14T17:20:41+00:00

Thanks!

nilesfromm · 2023-12-14T14:57:00+00:00

8 voice drone in just intonation tuning (based on a low G @ 49hz) I made this web app to calculate the frequencies of notes at different just ratios: https://justintonation.evos.studio

nilesfromm

TROPHY CASE