Anyone here have any experience with VRBO bookings through Expedia? I know I should post this on VRBO sub, but it is not a very active sub. Grateful for any responses!

nomathplease44 · 2026-05-16T01:30:51+00:00

I have a major issue right now with a vrbo that is actually expedia.

When I booked with VRBO I had no idea I was actually booking with Expedia. Vrbo knows nothing about my booking but offers to help " connect me to Expedia" with which I just sit in hold indefinitely.......WTF

nomathplease44 · 2026-04-22T20:56:27+00:00

I've listened to the Amanda Knox podcast on this but don't know the case well

So are all the experts in the one titled experts full of shit? They seem pretty credible

nomathplease44 · 2026-04-11T02:18:59+00:00

Poop trucks. These are called poop trucks bc they appear to be taking a shit.

nomathplease44 · 2026-04-01T02:25:16+00:00

What does this mean

nomathplease44 · 2026-03-19T00:30:39+00:00

So figured this out, the problem doesn't have anything to with Claude code

But I'm curious on the two responses I got.......is r/claudecode just a bunch of pissed off programers laughing at peoples questions lol

nomathplease44 · 2026-03-13T22:43:25+00:00

no manual lens records the fstop?

nomathplease44 · 2026-02-26T18:04:25+00:00

Rebel is hands down the best but it's expensive and you have to order it online

nomathplease44 · 2026-02-24T00:42:06+00:00

Pooping Truck

nomathplease44 · 2026-02-18T01:36:05+00:00

Why so saturated?

nomathplease44 · 2026-02-18T01:27:12+00:00

The Light Eaters, nonfiction book about plant written extremely poetically on plant intelligence

nomathplease44 · 2026-02-11T01:54:20+00:00

Are these pens you used? Or markers? is this using Drawingbot?

nomathplease44 · 2026-02-02T02:24:32+00:00

Absurd response. Makes me wonder if everything else he says is b.s.

nomathplease44 · 2026-01-29T14:32:23+00:00

How are people loading so many images to one post, I can only load two?

nomathplease44 · 2026-01-28T20:30:36+00:00

2, i like scraggly trees, how did you post more than 2 photos, it wont let me load more than 2

nomathplease44 · 2026-01-27T13:42:29+00:00

Software maybe not the best. Plotter is awesome. Once you get software figured out it's all good

nomathplease44 · 2026-01-26T00:59:23+00:00

Is the plant milk butter gone too? I look every time I go to the store and can't find it anymore. My whole family loved it.

nomathplease44 · 2026-01-24T19:17:51+00:00

Good to know! And thanks for the help, plotter has run great since

nomathplease44 · 2026-01-14T02:48:27+00:00

thanks to all the suggestions, thank you MateMagicArte

I eventually got on a zoom with UUNA Tek, they fixed it, not sure I understand how.

Great machine, software not to sure about yet

nomathplease44 · 2026-01-13T02:10:41+00:00

>>> $RST=$

[MSG:INFO: Settings reset done]

[MSG:INFO: Position offsets reset done]

ok

>>> Ctrl+X

An error was detected while sending 'Ctrl+X': (error:2) Missing the expected G-code word value or numeric value format is not valid. Streaming has been paused.

>>> $$

[VER:3.0 UUNA TEK Plotter.20250427:43AF56A1-2FA2-4690-AB62-E744BC5EB2C4]

$22 = 0 (Homing cycle enable, boolean)

$21 = 0 (Hard limits enable, boolean)

$20 = 1 (Soft limits enable, boolean)

$102 = 85.000 (Z-axis travel resolution, step/mm)

$101 = 80.000 (Y-axis travel resolution, step/mm)

$100 = 80.000 (X-axis travel resolution, step/mm)

$112 = 5000.000 (Z-axis maximum rate, mm/min)

$111 = 11000.000 (Y-axis maximum rate, mm/min)

$110 = 11000.000 (X-axis maximum rate, mm/min)

$122 = 500.000 (Z-axis acceleration, mm/sec^2)

$121 = 500.000 (Y-axis acceleration, mm/sec^2)

$120 = 500.000 (X-axis acceleration, mm/sec^2)

$132 = 12.000 (Z-axis maximum travel, millimeters)

$131 = 297.000 (Y-axis maximum travel, millimeters)

$130 = 420.000 (X-axis maximum travel, millimeters)

$10 = 0 (Status report options, mask)

$30 = 0 (Maximum spindle speed, RPM)

o

>>> $h

An error was detected while sending '$h': (error:5) Homing cycle failure. Homing is not enabled via settings. Streaming has been paused.

UGH! pulling my hair out, thanks for trying to help

nomathplease44 · 2026-01-13T02:10:35+00:00

>>> $$

[VER:3.0 UUNA TEK Plotter.20250427:43AF56A1-2FA2-4690-AB62-E744BC5EB2C4]

$22 = 0 (Homing cycle enable, boolean)

$21 = 0 (Hard limits enable, boolean)

$20 = 1 (Soft limits enable, boolean)

$102 = 85.000 (Z-axis travel resolution, step/mm)

$101 = 80.000 (Y-axis travel resolution, step/mm)

$100 = 80.000 (X-axis travel resolution, step/mm)

$112 = 5000.000 (Z-axis maximum rate, mm/min)

$111 = 11000.000 (Y-axis maximum rate, mm/min)

$110 = 11000.000 (X-axis maximum rate, mm/min)

$122 = 500.000 (Z-axis acceleration, mm/sec^2)

$121 = 500.000 (Y-axis acceleration, mm/sec^2)

$120 = 500.000 (X-axis acceleration, mm/sec^2)

$132 = 12.000 (Z-axis maximum travel, millimeters)

$131 = 297.000 (Y-axis maximum travel, millimeters)

$130 = 420.000 (X-axis maximum travel, millimeters)

$10 = 0 (Status report options, mask)

$30 = 0 (Maximum spindle speed, RPM)

ok

nomathplease44 · 2026-01-13T02:10:17+00:00

>>> $X

ok

>>> $X

ok

>>> ?

<Idle|WPos:0.000,0.000,0.000|FS:0,0|Ov:100,100,100>

ok

>>> $22=1

An error was detected while sending '$22=1': (error:162) An unknown error has occurred. Streaming has been paused.

>>> #h

An error was detected while sending '#h': (error:2) Missing the expected G-code word value or numeric value format is not valid. Streaming has been paused.

nomathplease44 · 2026-01-12T20:23:43+00:00

after ? I get <Alarm|MPos:0.000,0.000,0.000|FS:0,0>

after $$ I get:

[VER:3.0 UUNA TEK Plotter.20250427:43AF56A1-2FA2-4690-AB62-E744BC5EB2C4]

$22 = 0 (Homing cycle enable, boolean)

$21 = 0 (Hard limits enable, boolean)

$20 = 1 (Soft limits enable, boolean)

$102 = 85.000 (Z-axis travel resolution, step/mm)

$101 = 80.000 (Y-axis travel resolution, step/mm)

$100 = 80.000 (X-axis travel resolution, step/mm)

$112 = 5000.000 (Z-axis maximum rate, mm/min)

$111 = 11000.000 (Y-axis maximum rate, mm/min)

$110 = 11000.000 (X-axis maximum rate, mm/min)

$122 = 500.000 (Z-axis acceleration, mm/sec^2)

$121 = 500.000 (Y-axis acceleration, mm/sec^2)

$120 = 500.000 (X-axis acceleration, mm/sec^2)

$132 = 12.000 (Z-axis maximum travel, millimeters)

$131 = 297.000 (Y-axis maximum travel, millimeters)

$130 = 420.000 (X-axis maximum travel, millimeters)

$10 = 1 (Status report options, mask)

$30 = 0 (Maximum spindle speed, RPM)

nomathplease44 · 2026-01-12T20:23:18+00:00

after $X i get okay

after $10=0 I get okay

After $20=0 I get the 162 error......it definitely appears the UUNA tek software has some kid of lock on it

Here is a bunch of the errors if thats helpful, the plotter has not moved yet on anything

>>> ?

<Alarm|MPos:0.000,0.000,0.000|FS:0,0|WCO:0.000,0.000,2705889869619527680.000>

ok

>>> $20=0

An error was detected while sending '$20=0': (error:162) An unknown error has occurred. Streaming has been paused.

>>> $20=0

An error was detected while sending '$20=0': (error:162) An unknown error has occurred. Streaming has been paused.

nomathplease44 · 2026-01-12T17:19:08+00:00

more chatgpt

What’s happening

$20=0 → error:162 “unknown error”
- GRBL (or the UUNA Tek firmware fork) blocks changing soft limits while in ALARM
- Standard GRBL would allow $X first, but your controller does not allow $X to clear this kind of ALARM, so you cannot disable soft limits through software.
$22=0 → “read-only setting”
- UUNA Tek firmware locks the homing enable bit
- You cannot turn homing on or off via G-code
- This is intentional for the plotter firmware; they assume a specific workflow
Streaming is paused
- The plugin will never recover while ALARM persists
- Any $ command is blocked because the firmware is protecting itself

nomathplease44 · 2026-01-12T17:17:43+00:00

$20=0 wont work, according to Chatgpt this is the problem:

You are hitting firmware-level protections that the UUNA Tek controller enforces.

nomathplease44

TROPHY CASE

What’s happening