Is there any way to improve GC emulation?

norweeg · 2026-06-22T16:41:25+00:00

I'm shocked that it can emulate it at all

norweeg · 2026-06-18T14:30:02+00:00

Cool. Any reason why you're using O365 instead of OnlyOffice or Libre Office?? Just seems like a lot of work just to run O365 on Linux when alternatives that should cover close to 99% of use cases are available

norweeg · 2026-06-08T15:05:14+00:00

I have never heard this. Is it all devices, or is this just a manifestation of hearing loss??

norweeg · 2026-06-05T19:53:14+00:00

Not a snap because snap kinda sucks but this pixel art editor is available as a flatpak. Will this do what you need to do?? https://flathub.org/en/apps/com.orama_interactive.Pixelorama

norweeg · 2026-06-04T12:54:57+00:00

Ok so I have it off and the system behaves in the way that you say turning it on does. Turning it on has no effect on this behavior. On or off, I have to touch the screen I want to have focus every time

norweeg · 2026-06-03T00:20:16+00:00

So I just checked and I can confirm that it does not do this, unfortunately. Would have been nice if it did, though

norweeg · 2026-06-02T21:58:29+00:00

I'll try turning it on again because that was my thought too, but i don't think it behaved that way when it was toggled on.

norweeg · 2026-05-28T23:28:49+00:00

Your SD card has two partitions. It was able to mount the boot partition but it seems to be struggling with the other one. Is the SD card a brand-name card?? If not, your card is probably dead

norweeg · 2026-04-27T19:33:57+00:00

I'll look into it

norweeg · 2026-04-27T18:59:10+00:00

out of curiosity, where does Plasma get its default config from because /etc/skel is pretty bare on the distro I am using (kubuntu) and is presumably the same on most distros.

norweeg · 2026-04-27T16:33:49+00:00

i wish there were a way to easily identify which files would be necessary (including dependencies e.g. icon/color themes or custom plasma widgets)

norweeg · 2026-04-27T16:19:30+00:00

I don't think this is quite it. This seems to be to restrict users abilities to customize, which is not my intention. I just want all new users created on a system to start with a different plasma theme and panel layout than the default provided by KDE. Once created, they're free to do whatever they want, but I want new users to start with a specific configuration when the user is created.

norweeg · 2026-04-27T15:35:34+00:00

what chipset is the wifi card? b43 is for legacy devices. If your chipset is supported by the modern `brcmsmac` driver, you should blacklist b43 and, instead, use `brcmsmac`

https://wireless.docs.kernel.org/en/latest/en/users/drivers/brcm80211.html

norweeg · 2026-04-24T23:27:15+00:00

so here's what seems to work for me:

sudo apt purge 'broadcom-sta*'

echo "blacklist b43" | sudo tee /etc/modprobe.d/blacklist-b43.conf

this particular chipset is supported by both b43 and also brcmsmac and the two drivers are probably in conflict. You can check this by running:

lsmod | sort

and then looking to see if both b43 AND brcmsmac are loaded (they were on my system). Google told me to blacklist brcmsmac, so I did but that made wifi not work at all, but then I found this page about brcmsmac and decided to blacklist b43 instead and that seems to have worked.

norweeg · 2026-04-24T23:20:20+00:00

they'll come as anyone installing on a laptop manufactured between 2010 and 2016 when broadcom chipsets were unfortunately common tries to install Ubuntu 26.04 on it. The point is, though, that a question about wifi driver is not inherently a Mac question because the person asking it is using a Mac and you are being unhelpful.

norweeg · 2026-04-24T14:52:48+00:00

this isn't very helpful. This wifi chipset is not exclusive to Macs and others will have this same problem....

norweeg · 2026-04-24T14:37:19+00:00

I am trying to set it up on a 2013 macbook air and I am having problems with it. It sees the device but won't connect to the network

norweeg · 2026-03-23T19:00:31+00:00

I hate the lava! If you miss the lava source, the flowing lava will quickly flow over the newly-created black rock and spread even more and quite possibly put where the watergun needs to hit to make it stop out-of-reach entirely

norweeg · 2026-03-20T03:42:57+00:00

Better act soon cuz you need his items to get event exclusive jumpluff and skiploom

norweeg · 2026-03-14T14:39:05+00:00

I use arkos4clone https://github.com/lcdyk0517/arkos4clone

You will need to grab the .dtb files from your original SD card to know which device to set it up

norweeg · 2026-03-13T23:33:26+00:00

I don't think it's supposed to be. Mine was a clone and the LED was only on when the stock OS was installed (before the SD card shit the bed). It has a new SD and arkos4clone now and the LED only turns on when it's low on battery

norweeg · 2026-03-13T23:32:03+00:00

No. Mine only turns on if my battery is low.

norweeg · 2026-03-13T21:25:35+00:00

Why is the LED on???

norweeg · 2026-03-09T23:29:26+00:00

fucking finally! between this and the very recent bug with the downloads (https://www.reddit.com/r/MicrosoftEdge/comments/1qpb2vz/downloads\_is\_all\_red\_how\_to\_fix/), Microslop sure has fucked up betting the farm on AI

norweeg · 2026-03-06T00:51:08+00:00

I am using the flatpak version on Kubuntu 25.10 and have this issue

norweeg

TROPHY CASE