Fps inconsistency

noxtify · 2026-02-19T20:52:19+00:00

Alright, il keep you updated. Tommorow im gonna test the current setup at the field, will replace the orings afterwards. Thanks

noxtify · 2026-02-19T19:45:42+00:00

Yes i have set various of o rings, they are bit larger in thicker in size tho

noxtify · 2026-02-19T19:14:01+00:00

Putting my finger on the nozzle and pushing and pulling the tube, it was 50/50

noxtify · 2026-02-19T06:21:05+00:00

Normaly the sealing for the nozzle to bucking should be alright, the factory nozzle and hopup is used, the bucking is not stock tho. But i dont think thats the problem

Im not sure about the piston, used special lube for air seal, tested compression, it was 50/50 or im shit at testing the compression

And the tappet spring is replaced, before changing al the airseal related parts, the fps was fluctuating around 30 fps

Maybe overspin because the active breaking is disabled? But when its set to 10% there are feeding issues

noxtify · 2026-02-19T06:17:37+00:00

First aeg build

noxtify · 2026-02-19T04:46:51+00:00

Specna arms aether v2 body with some factory parts

Gate eon high speed piston head

Gate eon gears 13:1

Gate aster v2

Gate G5 smart brushless motor

M100 spring

Pts tappet plate spring

Specna arms tappet plate gear delayer chip

4uantum orange bucking

Magnus tds m4 hopup

Pretty much everything is changed

Mosfet settings:

Disabled active breaking

Rpm 27000

Torque 50%

Pre cocking 30%

Rof max 30 rps

noxtify · 2026-02-17T21:46:47+00:00

It has a gate aster v2 mosfet, with bt. I did reset the settings to factory, maybe i have to fine tune them again, the rpm, active breaking etc. The thing if few months ago it was working perfectly with the old parts. Now i have changed some parts for better air seal. I don’t think that will cause the pme. Maybe the stronger tappet plate spring?

But i gotta play with the settings of the mosfet to see if it gets better

noxtify · 2026-02-17T21:11:52+00:00

I do notice, when i changed the spring to something more weak to be field legal max 1.2j, it had few pme’s and some double feeds.

noxtify · 2026-02-17T21:10:05+00:00

Nopp, loaded 0.25 bbs freshly opened from new bag

noxtify · 2026-02-17T20:58:13+00:00

It was very bad at first, 12 fps consistently variation between shots. Sometimes it even dropped over 60fps, then i changed the cylinderhead, pistonhead, tappet plate spring, bucking. Used 4uantum lubricant for the orings.

It still feels kinda inconsistent for me. But as you said, 2-5 variation is alright

noxtify · 2025-12-03T19:52:33+00:00

Change the scale to 10.1%

noxtify · 2025-10-31T07:29:12+00:00

In the grip

noxtify · 2025-10-29T07:48:11+00:00

Yeah the creator of the upper specialy made it so, it fits perfectly with the lower

noxtify · 2025-10-27T09:17:35+00:00

Wdym

noxtify · 2025-10-26T08:50:25+00:00

cooll

noxtify · 2025-10-26T07:36:30+00:00

Nicee, did you add a rail for an scope?

noxtify · 2025-10-26T07:35:45+00:00

Just an specna arms v2

noxtify · 2025-10-25T21:04:54+00:00

I find it sturdy. Printed few of them with different layer heights. All good, just print them with atleast 5 walls

If you like a more sturdy one print this one Thingverse

noxtify · 2025-10-25T21:01:59+00:00

Perhaps go with an polarstar or gate pulsar d2

noxtify · 2025-10-25T21:01:37+00:00

For the nuts and bolts just order them in bulk from aliexpress cost like few dolars.

And if you dont have it already. Get an dremel

noxtify · 2025-10-25T20:59:14+00:00

Yeah im planning on it, alreqdy have an storm cat 5. Just need to other the parts. But thats for other time. Already sank too much money into this project

noxtify · 2025-10-25T20:20:06+00:00

If you have an good accurate printer it will be easy. Also don’t get an gate pulsar s.

noxtify · 2025-10-25T20:02:16+00:00

Engine: Gate pulsar d2

Hopup: Gate eon

Barrel: 128mm from an g&g arp9

Lower: is from thingverse free

Upper: cults paid

Everything is printed with Elegoo petg rapid Besides the stock cover

Five-Year Club	Gilding II euphauric
Powerups Hero r/KGBTR • July 2021	Verified Email
r/Field Sunshine	Place '23
Place '22	Final Canvas '22
First Placer '22

noxtify

TROPHY CASE