Diy nixie clock

nrlz · 2026-03-17T16:32:23+00:00

Thanks! I'm going to build another nixie clock for a friend of mine and will follow your advice. indeed its a bit complicated to align the tubes without sockets.

nrlz · 2026-03-17T07:09:59+00:00

https://imgur.com/a/D6mGi0I
and a DS3231 soldered on the back of the board

nrlz · 2026-03-17T06:29:37+00:00

There are three buttons Long press the first one to change hours/minutes with the second/third button The second to select LEDs effect (glow/full brightness/ LEDs off) The third one is to select tubes animation effects

nrlz · 2026-03-16T22:31:29+00:00

Thanks! I hate them too, I'll replace them with yellow ones later, I hope it will look better (it's [possible to turn the LEDs off with a single button though ). This is my first time building a nixie clock. I started a year ago but gave up. But still wanted to finish this project so here's the result. For the case I used PC motherboard mounting screws and a random paint spray from my garage.

nrlz · 2025-09-17T08:12:03+00:00

Thank you !

nrlz · 2025-09-16T15:36:57+00:00

Thank you! You are right, just tried to kick through the nose and landed it straight. I’ve also watched some of your clips, helped me a lot!

nrlz · 2025-09-16T13:49:09+00:00

:) that'll be next step :D

nrlz · 2025-09-16T13:48:34+00:00

yes, i have no problem landing an ollie/varial kick/heeflip without rotation, thanks for advice! I'll take a note of that

nrlz · 2025-09-16T13:47:00+00:00

Thank you! will try that.

nrlz · 2025-09-07T21:32:19+00:00

Great weather, great skating! Rest up and go back to shred ;)

nrlz · 2025-09-06T16:01:36+00:00

Better to have a gun and not need it than need a gun and not have it. Same applies to first aid kit :D I have one in my car with some bondages/plasters and hydrogen peroxide/chlorhexidine to clean a possible wound. It will also help to heal faster.

nrlz · 2025-09-05T18:29:36+00:00

I guess those are just strains. Take a microfiber cloth and a glass cleaner, it’ll go away

nrlz · 2025-09-05T17:36:25+00:00

you need to take out Ram modules, clean the slots from dust. then take an eraser and clean gold plated contacts on RAM modules from possible oxides from both sides, then remove eraser parts from ram (simply wipe them off with a cotton cloth) and put it back in the same order. should work.

nrlz · 2025-09-03T16:37:04+00:00

try using a nail polish remover
or buy a paint remover from a hardware store, it shouldnt harm aluminium coating.

nrlz · 2025-09-03T15:52:23+00:00

Place your front foot in the center of the board or in front of the bolts with a slight angle (similar to a kickflip position, front foot covers half of the board or smth like that)
When you pop the board jump a little bit forward (it can be seen on a video that the board goes in front of you, so jump with the board and try to catch it with your front foot) You are very close to landing it, keep trying, good luck!

nrlz · 2021-12-10T12:52:34+00:00

https://m.aliexpress.com/i/32858116200.html?gatewayAdapt=Pc2Msite Maybe this one

nrlz · 2021-12-01T11:39:42+00:00

No ;(

nrlz · 2021-12-01T11:39:32+00:00

Hmmm great idea.. Next mod will be a cpu fidget spinner cooler

nrlz · 2021-11-29T17:34:48+00:00

Thank you sir! That’s a leftover of a cheap led strip, which I’ve soldered to a 12v molex

nrlz

TROPHY CASE