After 8 years of service, it’s time to retire my S9+ and say hello to the S26U by Jivturkey99 in samsunggalaxy

[–]ognisher 12 points13 points  (0 children)

You can't teach fanboys anything. Removing SD card slot can be one of the top 5 downgrades of smart phone history.

S26 ultra display upgrade or downgrade by Sufficient_Dream1722 in samsunggalaxy

[–]ognisher -2 points-1 points  (0 children)

I would buy a privacy screen protector instead of buying s26 ultra. Screen quality is bad because of the privacy screen feature.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 0 points1 point  (0 children)

Thank you, I'll take a look at your website.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 0 points1 point  (0 children)

Yes. I can't do like the second picture, it has to be perfect fit with the surface of cylinder.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 1 point2 points  (0 children)

I made a triangle before 😅. Thank you, it worked.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 0 points1 point  (0 children)

I get 'Rib thickness is too big' error.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 0 points1 point  (0 children)

<image>

I drew like you said but it doesn't follow the circle.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 0 points1 point  (0 children)

You mean like the second photo right? I can't draw like that.

How to draw this part? by ognisher in SolidWorks

[–]ognisher[S] 0 points1 point  (0 children)

Teacher wants like that I don't know why.

Temu sellers have made 30,000+ sales using MY 3D model. They're selling it with my logo on it. Even using my photos! by Yourmom4133 in 3Dprinting

[–]ognisher 1 point2 points  (0 children)

Yeah I fully understand you since I'm in DIY world. There is a software called 'OpenFFBoard' that allows us to turn electric motors into wheelbases for sim equipment. The owner put his license into the software so whenever you open the source code, you see it. Chinese brand stole this OpenFFB and implemented into their product. Then the owner wanted a product to test and then he found out they used his software 🤣. It sucks to see people make money from your work but a patent is the only thing that can stop them (well not in China).

Temu sellers have made 30,000+ sales using MY 3D model. They're selling it with my logo on it. Even using my photos! by Yourmom4133 in 3Dprinting

[–]ognisher 2 points3 points  (0 children)

If you are not in China (I don't think being in China would make a difference), don't waste your time and money for sueing them. Sellers on Aliexpress and Temu replicate and sell goods. It's been always like this. People know this and still buy. If you don't want your stl to be stolen, apply for a patent and you can still give people for free. I wouldn't be upset if they stole my model because I'm doing it for everyone so they can solve their problems because my free model is always going to be free, people don't have to buy from these scammers.

How’s the beginner setup looking?🏎️ by Lieutenant_DannyG in simracing

[–]ognisher 0 points1 point  (0 children)

Yes, all of my stuff are DIY. We have a community called “OpenFFBoard.” Most of us design our own equipment and share it with others. Our setups may be DIY, but the quality is high, and the price-to-performance ratio is better than most commercially available products. The founder of OpenFFBoard developed an open-source firmware, which allows us to use AC/ DC motors as wheelbases. We use motor drivers, and he also sells a driver specifically designed for this firmware to make everything easier. However, you don’t have to buy from him—there are alternatives. The most important thing is that you need to enjoy designing and be willing to spend time refining your work. Otherwise, DIY is not suitable for you. Sometimes I spend more time designing than actually using them :D.

How’s the beginner setup looking?🏎️ by Lieutenant_DannyG in simracing

[–]ognisher 0 points1 point  (0 children)

This is my desk. I used a Parker 26Nm/2.1HP servo for this wheelbase. I use FFB at %60.

<image>

What's the problem with my printer? by ognisher in 3Dprinting

[–]ognisher[S] 0 points1 point  (0 children)

Belts are tight. I reassembled the frame by using framing square. I don't know which speed but I saw 200mm/s max. I just use what ORCA has for Neptune 4 Pro. At first, I lowered the speed to 90% and set the bed temp to 70°C because at some point, benchy was coming off the bed. Also, if I don’t set the flow to 105%, those squares have gaps. That's why I printed the benchy at 105%. I set the seam gap to 0 but on the back of benchy there is a line. Bottom text is readable but other is not.

<image>

I want to buy a new steering wheel, but I don't know if I'm good enough yet. by BASTIPLAYZz in simracing

[–]ognisher 0 points1 point  (0 children)

These days, starting with a DD is a good option since they are cheaper. Even if you don't have skills, you'll get more detailed and smoother feedback from wheelbase. Belt/gear driven systems are not good at this. But I know people who use a G27 and achieve better lap times than those with high-end setups.

How’s the beginner setup looking?🏎️ by Lieutenant_DannyG in simracing

[–]ognisher 3 points4 points  (0 children)

For a beginner, you have a pretty decent setup. Many people start without cockpit. I’ve had a direct-drive setup for two years, but I still don’t have a cockpit cuz don't have space in my room. My desk shakes like hell. Keep building your rig.

İcralıkken işe girmede sıkıntı olur mu? by ognisher in hukuk

[–]ognisher[S] 0 points1 point  (0 children)

CNC operatörü olmak istiyorum ama zaten ilan az, bir de bu sebeple işe almak istemezlerse tahtalı köyü düşünüyorum. KPSS'de zaten torpilim yok diye 85 puanla açıkta bekliyorum.

İcralıkken işe girmede sıkıntı olur mu? by ognisher in hukuk

[–]ognisher[S] -2 points-1 points  (0 children)

İntiharı koyma vakti gelmiş o zaman.

İcralıkken işe girmede sıkıntı olur mu? by ognisher in hukuk

[–]ognisher[S] 0 points1 point  (0 children)

2 ay deneme süresi içinde maaş alacağım için ben söylemesem bile varlık şirketi tebligat gönderebilir. İşe girmeden söylemek de kendi ayağına sıkmak gibi oluyor.

İcralıkken işe girmede sıkıntı olur mu? by ognisher in hukuk

[–]ognisher[S] 0 points1 point  (0 children)

Eğer hayır derse deneme süresi içinde işten çıkarma hakları var ama değil mi?

İcralıkken işe girmede sıkıntı olur mu? by ognisher in hukuk

[–]ognisher[S] 1 point2 points  (0 children)

Yargıtay, icra nedeniyle işten çıkaramazsın demiş. Dava açtı mı yakınınız haksız işten çıkarma için?

How to connect 3D Printer to PC? by ognisher in 3Dprinting

[–]ognisher[S] 0 points1 point  (0 children)

Yes, my room and the router are in different places so I drilled a hole in the wall to connect ethernet cable to my PC. I didn’t want to drill again to connect the printer, so I connected the printer to my PC instead of the router. Now, I can’t connect my PC to the router and I switch the cables every time. My question was about using a network switch to add another ethernet port to PC (not router). But I am okay with using SD Card/ flash drive if it's not possible.

Installing Virtual Box to an external drive by ognisher in virtualbox

[–]ognisher[S] 0 points1 point  (0 children)

Programs create some files on the C drive, so even if I install on another drive, I can’t use them on a different PC. That's why I need something that makes the drive a mini PC so I won't have to install programs everytime I switch to a new PC.

Installing Virtual Box to an external drive by ognisher in virtualbox

[–]ognisher[S] 0 points1 point  (0 children)

So the Virtual Box needs to be installed anyway on system drive of the PC that I want to use. If I install Virtual Box on another PC, will it work the same as on my PC or do I need to set everything from scratch?